HT201210 My mini is freezed only Itunes icon and the USB icon is showing even when i restart, pls advise
My mini is freezed only Itunes icon and the USB icon is showing even when i restart, pls advise
The USB cable and iTunes logo is telling you to connect your iPad to the computer you normally sync with. Something has gone wrong and you need to restore your iPad.
Similar Messages
-
My iPhone 3gs has frozen while doing update 5.0.1 I think it was. All it shows is the iTunes logo and the usb cable on the screen. I will not turn on or off. I have tried reconnecting to iTunes but nothing happens. Have held both buttons for 10 seconds etc and nothing is working! What can I do?
Here are Apple Steps: http://support.apple.com/kb/HT1808
-
hi there, I need help .. I have 2 gen ipod touch and I restore my ipod around 11:00 pm and now its 1:20 am and on my screen its the iTunes logo and the usb cord and when I plug my charger in my laptop .. iTunes comes up and this what it saids "iTunes has detected an ipod recovery mode. you must restore this ipod before it can be used with iTunes" so what do I do.. do I let my ipod died right out & then try it .. because I restore it ,... it was beening to slow... so please help me ?
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My Ipod 4th Gen will not turn on. When I hook it up to the computer I get the ITunes symbol and the usb device on the screen of the Ipod. When I go to restore the Ipod it will not restore. I am getting unknown error code 6.
Likely this:
Errors related to third-party security software
Error 2, 4 (or -4), 6, 40, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer. -
I dropped my ipod touch 3 generation into some water. I let it dry off completely befor turning it back on. Now it shows me the itunes logo and the usb cord picture. I restored my ipod, and now it won't connect to itunes or my computer. What should I do?
Hey
Does it charge when connected, if not you may have broken it..
You can always try an apple Genius at an Apple Store,
Jason -
updated to ios6 on my ipod touch 4g when i try to turn it on it doesn't, it just comes up with the itunes symbol and the usb, so i plugged into laptop opened itunes and it says to restore back to ios5 i pressed restore and it cant connect to server? help?
Maunally restore it. In order to do this:
-Download the iOS 5.1.1 firmware from here http://www.redmondpie.com/download-5.1.1-ios-for-iphone-4s-4-3gs-ipad-ipod-touch -direct-official-links/
1. After downloading the firmware from the given link, open iTunes and click on your device.
2. Now press SHIFT on your keyboard and while pressing it click on "Restore".
3. A dialog box will appear.
4. Select the firmware you downloaded and click ok.
5. Done!!! Your iPhone will now be restored to 5.1.1 and if you had backed up your iPod before, then you can put all its settings afterwards. -
I have just tried to update my ipod touch and the update failed but it has locked my ipod. All I get is a picture of the itunes logo and the usb lead. I am unable to get the ipod to move and I don't know what to do. I think I should be recompenced by Apple if I have to pay to get it fixed!
The logo is saying connect it to your computer with iTunes installed on the computer. I assume when yo do this that the iPod is not seen in iTunes. to make iTunes appear try:
- Resetting the iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Place the iPod in recovery mode. See:
iPhone and iPod touch: Unable to update or restore
- Place the iPod in DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If the iPod appears in iTunes restore the iPOd. If not I would make an appointment at the Genius Bar of an Apple store. -
I am trying to get my contacts of an old iphone 3. It show the Itunes logo and the usb connector of the phone charger. How can I get that off the phone and access my contacts.
Ideas anyone?You need to plug it in to iTunes. Once it starts working again, back up the old iPhone to iCloud then go to iCloud in settings. Turn on contacts then you get them back. Another option is to back up to iTunes with the old one, then on the new one, go on iTunes, click restore backup, and choose the old iPhone. I suggest using icloud. Hope it helps!
-
I awoke this morning to find my iPhone 3g in recovery mode. I tried rebooting, charging, and when I connected to iTunes it gave me a message saying I had to finish recovery first. My screen shows the iTunes logo and the USB cable. Any ideas?
http://support.apple.com/kb/HT1808
-
My ipod was updating overnight. I woke up to find the screen frozen with the itunes logo and the usb charger. I've tried hooking it up to itunes but it says I need to restore and update but I've tried to do that and it won't. What should I do?
- Try placing the iPod in Recovery Mode and restoring via iTunes
- Next try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I tried to restore original settings on an ipod touch I just purchased used. It worked fine before and after I selected the restore, I now have the little itunes logo and the usb cord pointing to it and it will do nothing else. any suggestions?
Try placing the iPod in recovery mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
My Ipod froze while downloading a software update from Itunes.. now I have a screen with an Itunes logo and the USB cord and my computer does not recognize the Ipod??
See Here for,
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
For Mac
http://support.apple.com/kb/ts1591
And Here for,
Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
HT1766 my phone wont turn on and has a itunes picture and the usb picture on it what do i do
my phone wont turn on it has a itunes pic and a usb pic on it i take it i need to conect it to itunes but cant find out where or how anyone help please
iPhone is in recovery mode.
http://support.apple.com/kb/HT1808 -
When i plug in my iPhone to itunes so i could restore because i found it, itunes gives me error code 2009. on my iPhone, all that is displayed on the screen is the itunes logo and a usb cable saying to connect it to itunes. Help please?
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. -
I did the software updae 7.0 to my ipad and its now showing the itunes symbol and the usb cord
i bought a new ipad2 everything was working then i did the upgrade oo 7.0 and the ipad never worked after it shows the ipad symbol and the usb cord!
Sounds like it'sgone into recovery mode : http://support.apple.com/kb/ht1808 - you will need to connect it to your computer's iTunes and you can then restore/resync your content to it
Maybe you are looking for
-
Can't update/restore my Ipod (with Vista...)
Hey guys, is there anyway I can update or restore my iPod with vista because its not letting me I keep getting "Itunes has detected an Ipod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes." So I click
-
How do i put scanned docs in a file to email
i want to put scanned docs into a file folder and email
-
SELECT T0.CardName, sum(T1.Price) [Year To Date], '0' [Previous] FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry WHERE T0.DocDate Between DATEADD(year,-1,GETDATE()) AND GETDATE() GROUP BY T0.CardName UNION SELECT T2.CardName, '0' [Year
-
Photoshop CC "Fit Image" option
In CS5 and CS6 I used the "Fit Image" command/option in an action to batch resize images according to the longest dimension, regardless of aspect ratio or portrait/landscape orientation. So far in Photoshop CC, I am unable to locate the command/optio
-
How to start and run osgi.jar and bundles into it programmatically
I want to launch and run osgi.jar programmatically(at runtime) from a simple java program. Then load and run a osgi bundle into the osgi framework from the same program Could anyone help me in this regard thanks in advance