HT201210 my phone just says that i need to connect to itunes but thats it what do i do now?
my phone says to connect to itunes. but its not letting me what do i do now?
the image is trying to tell you to connect the device to a computer by cable and use itunes on the very computer to restore the firmware
Similar Messages
-
My iPod is disabled and I do not have internet access it says I have to connect to i tunes but how ? I do not have internet. Is there another way I can reset my iPod ? BTW I'm only 13
Now it's allowing me to reboot (hold down power button and home button and restart), but every time it just comes up to the same thing: the connect to iTunes page. Which is not possible. And I refuse to restore my iPod. PLEASE HELP.
-
Please Help!
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it.
This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. -
I was downloading the latest iTunes and my computer shut off in the middle and now my phone is displaying that i need to connect to iTunes and iTunes is telling me that i need to restore my phone before it will work. I have pics that i have not uploaded yet, how do i get around this without restoring my phone? Thanks,
I have the exact same issue. I havent found our what is causing it either. Multaple re-install attempts with no success. I have to use Windows Media Center to burn audio discs. Any other advice?
-
Hello, my iPad has been disabled, and it says that I need to connect to iTunes. As instructed I connected to the find my iPad/iPhone site to put it on the recovery mode. However, I accidentally erased my account, so please help!!! Also, I browsed a lot to find a solution, but none of them were helpful, sorry. Hopping you could help, thank you.
However, I accidentally erased my account,
How did you erase your account? A lot of people would like to know. No one has found a way of erasing an Apple id account.
Robert -
Why do I have to connect my ipad(4th gen) to my laptop to download apps? I downloaded some yesterday, but now they just say waiting. If I connect to ITunes, I can get them through that. I am not using cellular data, just through wifi.
Any ideas greatly appreciated, it will save me a journey to the apple storeI have now solved it. I signed out of my iTunes account and then held down both the power buttons until the apple appeared. When I signed back in it started downloading.
-
Today was my ipod disabled. it says I need to connect to iTunes, but when I connect it brings up an error message that says I have to enter code but my problem is that I forgot the code!!!!
Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
did an update for my 4s now it tells me i need to connect to itunes but phone wont connect to itunes also i have got ios6 on my screen and thats all the phone will do
They will be gone from the iphone, but you should be syning all contacts to your computer regularly and should be importing all pics to your computer regularly, particularly before any update.
Have you failed to do this? -
Apple tv just started showing I need to connect to itunes.
I can't as I do not have the cable needed. What can I do?
I may be wrong Karsten but the OP seems to be saying that the Apple TV is asking for the cable and hence it is that 'special situation' you refer to.
apple tv just started showing I need to connect to itunes.
I assumed this is what the OP is seeing. -
My iPod is disabled, but not because I forgot the password. It says I need to connect with iTunes, but when I try it says I need to enter the password. What do I do?
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
my iphons says iPhone is disabled please connect to iTunes but iTunes is asking for my passcode which i can not key into phone....any one know what to do???
actually i just found this on apple.com/support
-
My Ipad is saying it needs to connect to itunes but when i go onto itunes it says it can only be restored but it will delete all my memory. HELP!!
No other choice, you have to restore to use your iPad.
-
My ipad says its disabled and need to connect to itunes but is says to enter password which I don't have because of my kids. How can I reset the i[pad
You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and restore/resync your content to it
-
My iPad conveys that it is disabled, and that I need to connect to iTunes. When I connect to iTunes I get a message that I need to enter my pass code and open my Ipad, but I don't get the scree with the number board to open with a password. How do I fix this?
You will need to restore it. The sidebar of your iPad appears on itunes even if you dont enter the passcode. There's the option to restore it. More info:
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software -
My iPad conveys that it is disabled, and that I need to connect to iTunes. When I connect to iTunes I get a message that I need to enter my pass code and open my Ipad, but I don't get the screen to open with a password. How do I fix this?
You will need to restore it. It may not sync, but the iPad's sidebar has to appear you can restore it and it will be as the last time ou synced it to iTunes. For more info:
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
Maybe you are looking for
-
Session Timeouts accessing data from Xcelsius
I am running Business Objects XI R2 SP2 and running Xcelsius 2008 FP1. Basically within my models i use LiveOffice to refresh the initial data used within the models and then I use QaaWS to use certain drill through parameters to retrieve more detail
-
Hi all, I'm trying to make a mandatory field check but in the message triggered I want to use the attribute "Text" of the label of my inputfield: //This is my inputfield's label IWDLabel Dt_Decrichiesta = (IWDLabel) view.getElement("Dt_Decrichiesta
-
Dynamic 'Include Text' syntax not working in Send mail task.
Hi all, I want to send some dynamic text via send mail task to agents. I tried creating a standard text in SO10. In send mail task in Descriiption tab added the below syntax to call inculde text. "INCLUDE ZTEST OBJECT TEXT ID ST LANGUAGE EN". This wo
-
How to distinguish 'visited' sites with a color, Red?
I have my 'visited' links set to red and unvisited links set to blue. After 'visiting' a link, the color remains blue instead of changing to red. I recently, like a few days ago, installed 4.0.
-
Control Internal Electronic Shutter from IMAQ-Vision in VB6
Hello, I've been trying to create a custom image acquisition application which uses the following setup: Hamamatsu C4742-95 Digital CCD Camera NI PCI-1422 Image acquisition Board Microsoft Visual Basic 6.0 SP6 IMAQ Vision for Measurement Studio 6.0,