HT201210 My updates doesn't show up?

My iTunes icon shows there are updates but when I tried to go in, it just shows a blank page.

There are many posts about this same issue. Apparently there's a problem with the Apple app site. You'll just have to wait and try again later.
 Cheers, Tom

Similar Messages

  • HT1338 I'm trying to download java on my Mac machine but the software update doesn't show me anything. Please advise what I should do to get the application.

    I'm trying to download java on my Mac machine but the software update doesn't show me anything. Please advise what I should do to get the application.

    If you can run it under chrome, you have java installed.
    There was some malware that exploited an older version of Java (not javascript) running in a Browser. Since few people use it Apple turned off Java by default in the Safari Browser.
    If you need it for something, just turn it back on in Safari preferences (inside Safari). After a few months of non-use, you may find it has turned itself off again.

  • EFI firmware update doesn't show up?

    Wondering why the EFI firmware update doesn't show up for me in Software update? My firmware is: MP31.006C.B03
    Supposedly after the update its supposed to be: MP31.006C.B05
    Does this mean that I don't need the update?

    CapNemo wrote:
    Thanks for all the replies. I guess the problem is that I haven't yet installed the Leopard Graphics update. Since everything is running so well right now I didn't want to mess with it.
    So what's the story, should I or shouldn't I install the Leopard Graphics Update and the EFI Firmware update? I've never experienced the wake from sleep problems because I have Energy Saver set to "never" sleep.
    It might be wisest not to, but then it's hard to say. The
    firmware update might address some nasty issues we don't know
    about. Or it might be targeted specifically at the reboot issue.
    How can we know? There's very little information on the download page.
    It's a gamble, sorry to say.
    One thing: I'm not super convinced you'll need that graphics
    update after the EFI update has been applied. It would be surprising
    if Apple made the machines reliant on something not included with
    the original install disks.
    You might try this very risky (caution: possibly dangerous; at your
    own risk only) thing: applying the graphics update and then manually
    reverting it from a backup after installing the EFI update.
    Note this though: the EFI update is essentially irreversible.
    In a couple of months, graphics update 2 will likely be available, if
    history repeats itself. You might wait until then, and take that risk
    instead

  • Software update doesn't show 2.1

    When I open Software Update, Aperture 2.1 doesn't show up.
    One possibility for this is that I don't have Aperture installed in the Applications folder on the startup drive. Could this be the issue?
    The other possibility is that I have a volume license. But I thought volume licenses qualified for free updates?

    Just a comment - it is NOT a good idea to move Applications, especially the Apple variety, out of the Applications Folder. If you wish to use another organisation method, why not use an Alias to Aperture in a Folder of your choice, leaving the real Aperture where it belongs. I have a few such Folders with aliases.

  • How come Mac OS X's Software Update doesn't show a total time ETA and size?

    Hello.
    I noticed when downloading big updates from Mac OS X 10.5's Software Update, it doesn't show the TOTAL time left and size. It only shows the individual updates (e.g., iTunes). Is there a way to show the totals especially when downloading takes forever?
    Thank you in advance.

    Kappy wrote:
    Well not in Software Update, but if you download standalone updates directly from Apple's download site - support.apple.com/downloads/ - using Safari then you will get that information reported in the browser's download manager. However, Software Update does report the size of each listed update.
    Yeah, I wanted to know the total of all updates since some updates are so huge. Like Java update 5 is like over 160 MB! Add iTunes and others! Yikes.

  • HT4623 Software update doesn't show up on general tab

    I can't download apps without an update, but the software update tab doesn't show up under general. I don't know how to update my iOS.

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • Software Update doesn't show all updates available

    I have multiple G4 iMacs that are running OS 10.4.8. When I go to software update it doesn’t show any of the following updates as available
    Security Update 2007-001
    Security Update 2007-002
    Daylight Savings Time Update
    I have tried reinstalling the 10.4.8 Combo upgrade and have run the disk utility fix permissions multiple times. I also reset the ignored updates with no difference.
    Some of my 10.4.8 computers see the updates and install them and some don’t.
    Any Ideas??
    G4, G5 workstations   Mac OS X (10.4.8)  

    Hi Robert and welcome!
    At the risk of upsetting the powers-that-be, there have been issues noted with the updates when downloaded from Apple's server or via Software Update.
    Go to VersionTracker and download them from there. I did, and had no problems.

  • HT201210 while updating iOS its showing "The disk you are attempying is full" kindly suggest as still 28GB free space avialable in iphone 5 32 GB.

    while updating iOS its showing "The disk you are attempying is full" kindly suggest as still 28GB free space avialable in iphone 5 32 GB.

    That message ("attempying"?) will be referring to your computer. Your phone does not have a disk.

  • IPad unresponsive after iOS 8.02 update, doesn't show up in iTunes, hardware reset (home and standby buttons both held down for ten seconds) not working

    I have a 32GB iPad mini that was purchased new in June of this year. A little while ago, I started the iOS 8.02 download while it was plugged into a wall socket using an official apple wall to USB plug and an official apple thunderbolt cable. I then left for 25 minutes to get some food.
    On coming back, I discovered the iPad with a black screen showing the apple logo. I thought this was just an ordinary part of the update, it was restarting or something after installation, so I thought nothing of it. Then, after another minute or two, the screen flashed blue and then went completely black.
    Puzzled, I waited for another second and the apple logo reappeared as if the iPad was restarting again. However, after a few minutes, this happened again. This has been going on for the last half an hour, and I was wondering has anybody experienced this before.
    As I stated in the title, it won't show up in iTunes, and the hardware reset or whatever it's called doesn't work. Also, bear in mind I had issues syncing it with iTunes the night before and it also seemed to crash a few times last night, restarting the iPad and bringing it to the blank screen with the apple logo for a few seconds before going to the lock screen. That didn't happen at all this morning though.
    The iPad is not jailbroken, however, it does have licenses for gba4iOS, which is still installed on it, and a VPN license installed on it by the Hola app, which I deleted but never bothered deleting the license for. Any help would be greatly appreciated.

    Hi Colin how are you?
    I updated my IPAD yesterday and have the exact same problem.
    Itunes does not recognize my ipad. Home and standby also doesnt work.
    Also have the blue thing every few minutes and the apple logo but it never goes beyond it.
    Have you solved the issue?
    IPAD AIR

  • Software Update doesn't show all updates?

    I'm setting up a PowerBook G4 with 10.4, starting with a basic install of 10.4.0 on a blank disk, then using Software Update to tell me what's needed to bring it up-to-date. After a couple of rounds of installations (starting with 10.4.10) and restarts, I began to wonder: Why haven't I seen any AirPort updates in Software Update? The AirPort utilities now installed are v.4.1.1; I have installers for 4.2 and two related items: AirPort Update 2005-001 and Security Update 2006-005. Why doesn't Software Update list these? What else is Software Update not telling me? If I can't count on Software Update to tell me everything I need, what good is it? Anyone have any thoughts?

    Well, yes, I guess that's why the installer for Security Update 2006-005 tells me it cannot install because "This volume does not meet the requirements for this update." However, the Combo update does not include AirPort 4.2 or the AirPort Update 2005-001, but Software Update does not suggest installing them, though there's an AirPort Extreme card in the PowerBook (in fact, that's what I'm using to run Software Update). I did install them, but had I been relying entirely on Software Update, I wouldn't have known about them.

  • Stupid update doesn't show my ipod menu

    I updated my Itunes now the stupid thing won't show my ipod menu. How the heck am i supposed to be sync my files on my IPODS!!!!!?
    Where is it?

    Hi OddParentfan,
    Thanks for visiting Apple Support Communities.
    See this article for how to sync your iPod using the new interface in iTunes 11:
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12313
    Best,
    Jeremy

  • The new iOS 6.0 update doesn't show my apps on my home screen. They are in the iCloud but only give me the option to open therm. How do I get these apps back to my home screen?

    My apps are not showing on my home screen after the new iOS 6 update. They are in my iCloud but it only gives me and option to open. How do I get these apps back on my home screen?

    Do you have an Restrictions set that would hide the apps? Settings>General>Restrictions
    Have you used the Spotlight search? Maybe you just can't find them.
    Next
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • App says new update but the update doesn't show up

    Whenever I click on the app it loads but won't open because it says update here. I click on it and there isn't anything that says download. It just says open like normal.

    Is the update/download "waiting"?
    http://lifehacker.com/5948155/fix-iphone-apps-stuck-waiting-during-installation
    Nxt
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Download on computer and sync
    - Restore from backup. See:                                               
      iOS: Back up and restore your iOS device with iCloud or iTunes

  • HT4623 "software update" doesn't show up on my screen

    on my settings it doesnt give me the option to upgrade my software, even when im connected to wifi

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • How to install (not update) the HP LaserJet 1020/1022 on Mountain Lion? The Apple Software Update doesn't show nothing.

    Hi guys,
    I'm trying to install my HP LaserJet 1020 on my new Mountain Lion anyway I'm not able to find any driver! The HP says that I can update or install this printer using the Apple Software Update anyway I don't see any update or installation on it.
    Does someone know a way to download a driver or find a solution for this problem? With previous version of the OS It was possible to download a .dmg for the HP LaserJet 1022 (the driver was the same for both versions, 1020 and 1022). I tried to download and install the driver for Snow Leopard anyway I don't see any entry when I try to select a driver for my printer during the installation phase (the list contain only two very generic drivers for HP printers).
    Thanks for your time!

    The HP says that I can update or install this printer using theApple Software Update anyway I don't see any update or installation on it.
    Updates are only available if the software has already been installed.
    HP is responsible for updating their drivers for Mountain Lion compatibility. Not Apple.
    Doubtful the driver for Snow Leopard will run on Mountain Lion.

Maybe you are looking for

  • GL line item report

    HI Guru's when we are  running transaction FAGLL03. When selecting Cost Centre within Dynamic Selections, twe are getting  the following error message: "Custom selections deleted because fields not active in ledger". what is the problem? regards Suni

  • Mac Mail... what e-mail accounts will work with this?

    Hello, I want to set up my e-mail to work with Mac Mail. I currently have a yahoo account and realize this cannot be done with Yahoo. So, my question is what e-mail account can I set up and use with Mac Mail? I am aware that .mac has an account that

  • Cloud Protection??? Taken over my computer.

    I downloaded from the internet and now Cloud Protection has taken over my screen and will not go away unless I purchase it.I have uninstalled everything and it's still there.  I would like to do system recovery to take it back to factory setting and

  • How long does a tick last for the Tick Count (ms) VI in LabVIEW?

    I'm trying to compare the timing performance between a VI implemented in LabVIEW and another VI implemented in LabVIEW FPGA module. If I use the Tick Count in both VIs (every one in their own module), I want to know how long does a tick last in LabVI

  • Design Guidelines Needed

    I'm currently part of project which requires the implementation of Analytical Platform for a logistics domain. We have identifed some KPIs that has to be implemented within Analytical Platform. In addition there have also been request from users to h