HT201210 Problem while updating to IOS 6

I was trying to update my 4s to IOS6 and once I got to the stage where my iPhone restarts its stuck in the loading section. How do I fix this?

Samething happened to me today. Did you get a solution?

Similar Messages

There was a problem while updating ios 7.1 now my ipad isnt starting up just shows a symbol of itunes with a arrow towards it with its USB cable

there was a problem while updating ios 7.1 now my ipad isnt starting up just shows a symbol of itunes with a arrow towards it with its USB cable

YOU ARE IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

While updating to ios 6 my iphone has crashed

while updating to ios 6 my iphone has crashed, and is now stuck on the installation screen. anyone know what i can do from here?

I'm having the same problems. Can't even find out if Apple is working on it. Tried to downgrade but is not supported by apple so error 3194 comes up which is verifying with the apple web site. Which then stops everything. I understand you can modify the "hosts" file to by pass the issue, but hate doing that as it gets involved. May try it if I can't get any satisfaction from apple.

My iPhone got locked while updating to IOS via my laptop. How can I restart my phone

My iPhone got locked while updating to IOS via my laptop. How can I restart my pihone?

Thank you Roger Wilmut. I am grateful for your response.
I bought the iPhone new and set up by myself. I still remember apple id details. The problem is that while the update was on, I needed to enter my apple id on the phone to complete the update my screen lock has been activated. Now the phone only displays the iTunes logo and the USB cable being inserted. But I can still access my the phone contents through my laptop. I need to force the phone to restart. How can I do that? mind you I have pressed the home and power buttons together for a couple of minutes. It will only display the apple logo for a few seconds and then return to the iTunes and USB cable display. Maybe the phone is hanging. So please help me.
Thank you very much

My 5s showed an error while updating to ios 8.1 and it has hanged and its not turning on

my 5s showed an error while updating to ios 8.1 and it has hanged and its not turning on

Did you click on the link just below that that says:
iOS: Device not recognized in iTunes for OS X
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
You have to read the entire support article and follow the subsequent links if the first solutions do not resolve the issue....
GB

Hi, my iphone 5 encountered an unknown error while updating to iOS 7 via itunes and is now stuck in recovery mode and prompts me to restore the phone when I connect it to itunes but then I would lose all my data. Any suggestions please?

Hi, my iphone 5 encountered an unknown error while updating to iOS 7 via itunes and is now stuck in recovery mode and prompts me to restore the phone when I connect it to itunes but then I would lose all my data. I DO NOT have any back ups on itunes. Is there anyway to get out of recovery mode without restoring or recover data after a restore?
Or any other suggestions please? Thanks

As pdroth said, you should have gotten a backup made when you started the update of iOS. If you cannot find a backup, and the phone is in recovery mode, there are no futher suggestions to make. To get the phone working again you have to restore. You cannot force a backup at this time since it is already in recovery mode. It will not allow anything else but a restore at this point.

Problem while updating the Support Package 17 on my SAP WAS SP9

Hi,
I'm facing problem while updating the Support Package 17 on my SAP WAS SP9
ERROR 2006-10-13 10:23:22
FSL-06002 Error 2 (The system cannot find the file specified.
) in execution of a 'CreateProcess' function, line (284), with parameter (java.exe ...).
Please help me in this regard.....
Thanks in advance...
Satya

Hello gentlemen, I am also having problem with the following running on 64 bit Windows and SQL2005/64 bit. I am erroring in Step 8 'Updating JDBC' driver. I am attempting to update from SP9 to SP18. The WEBAS Jave installed went flawless but I seem to be stuck here. Any help is appreciated...
ERROR 2006-11-22 10:13:57
FSL-06002 Error 2 (The system cannot find the file specified.
) in execution of a 'CreateProcess' function, line (284), with parameter (java.exe ...).

Connection problems after updating to iOS 5

Hello everyone,
I updated my iPhone 4 (bought it in June '10) to iOS5 a week ago like everyone else. Ever since then, I've been experiencing problems with pretty much anything that requires a data connection. It won't send messages, log in to Facebook or other communities or find any websites. I have to switch the phone off and back on and then it'll work for a while. Usually, the problem starts after I haven't the phone for 15 minutes or more. It just happened and when I checked the connections, I had full connection (five bars + 3G) to my phone provider and full connection to my wifi as well. Still, iMessage said my messages couldn't be sent, it didn't download new emails and Whatsapp Messenger wouldn't even connect. So far, I haven't experienced any problems with the phone connection, can make calls and haven't been told I couldn't be reached, so I think it's safe to assume the phone connection isn't part of the problem.
There weren't any problems while updating the phone and I haven't dropped it or anything since then. The only thing I noticed was that when setting it to auto-sync via iCloud, it slowed down my internet, so I switched that feature back off. Do you think this has caused the problem? Any suggestions to what I should do?

How long does the "waiting" message stay there? Does it eventually go away and the app loads or does it stay that way permanently?
The app store is temporarily being overwhelmed by purchasers of the new iPad trying to get apps onto their devices. This might be a reason for a long wait. But eventually you should be able to get the app if the extra use is causing the problem.
Did you try a reboot of your iPad? Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.
You might also have something else waiting to download that is causing the problem. Something like a podcast. Check all apps that download regularly to see if this is the case and delete those or terminate their download.
Have you deleted those apps that are waiting? Do that and then retry them on at a time.
Hope this helps.

Iphone 5 back camera problem after update to IOS 8. Focus doesn't work on back camera!

My device is Iphone 5 64gb IOS 8.
I have problem after update to IOS 8. When i run camera.. I hear some scratch inside my phone. And focus of back camera doesn't work.
1. How can i fix it?
2. Or how to rollback to IOS 7+ ?
3. Should i come to app store with this problem?

I'm having this same problem too. Worked fine prior to iOS update. I contacted Verizon this morning who advised that this is a known issue. They suggested I backup my device, and perform a factory data reset. When prompted to update to iOS 8 again, re-installation has been known to resolve the issue. With all the problems with iOS 8, camera, and overall device slowing, I might just wait for a follow on SW turn.

Does anybody know the error code 11 while updating to ios 4.3.3.? thx

does anybody know the error code 11 while updating to ios 4.3.3. on an ipad1? thx

but my hard drive is still lot of spaces...still keep on trying to update...

Lost all my iphone songs while updating to ios 7. how do I get them back?

I lost all my iphone songs while updating to ios 7. how do I get them back?

Restore the backup you surely made before you updated, as anyone would do before updating any computing device:
iOS: Back up and restore your iOS device with iCloud or iTunes

Facing problem while updating IInfotype 0009-bank details through workflow

Dear SAP Gurus,
I am facing a problem while updating Infotype 0009 through workflow which is integrdated with portal.
Scenario:
Employee logins to portal and changes his/her bank details like payee name, bank key, account number, postal code and city of bank, bank name etc.
Once he submits the request, my workflow is triggered through SAP_WAPI_START_WORKFLOW which is called from portal and goes through various approval steps and finally reaches the step where the container elements are finally to be updated in IT0009.
Field bank account number (BANKN), which is part of table PA0009 are easily updates using the FM HR_INFOTYPE_OPERATION by first enqueuing the employee number and after the update dequeuing it.
However fields like payee name (EMFTX) bank key (BANKL) , bank name(BANKA -structure BNKA_BF-this is automatically fetched based on bank key) and postal code(BKPLZ) and city of bank (BKORT) are from structure Q0009 (on the infotype 9 screen level) and from table BNKA (at table level). The problem is that these are not getting updated by HR_INFOTYPE_OPERATION as they are not the part of infotype 9.
Can anyone help me to understand how can these fields be updated ?
Quick help will be highly appreciated.

Hi Spantaleoni,
Thanks for your quick response.
Well actually the table BNKA is a master table for the bank information and we must not create entries in it or update the table programatically, rather we should use the available data in it.
Now say employee currently has bank as A and he wants to change it as B which is available in BNKA then he will just select the bank B from search help provided in portal which again comes from table BNKA only. Employee then submits the info and it must get updated in the infotype PA0009.
As far as think, this should be done on screen level of infotype PA0009 as I have already mentioned that certain fields are coming from structure Q0009 and they cannot be updated on PA0009 table level.
I am just looking for way through which I can update the screen of infotype PA0009 of employee through workflow.
Regards

Can't use the camera function in my ipod touch 4s while updated to iOS 6.0

I can't use the camera function in my ipod touch 4s while updated to iOS 6.0.
There is all black screen when I turn on my camera.
I open the restriction setting already.
thank you.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

TS3694 Hi my iphone 5 is bricked in recovery mode while updating from ios 7 to 7.0.4 and every time when i try to restore Unknoown error 12 pops up.iphone was not jailbroken. please help

Hi my iphone 5 is bricked in recovery mode while updating from ios 7 to 7.0.4 and every time when i try to restore 'Unknoown error 12' pops up each time.iphone was not jailbroken. please help

From the article that your statement was posted from:
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.

Problems since updating to iOS 7.

Hi everyone ! I got some problems since updating to iOS 7.My first problem is that my computer can't detect the photos from my iPhone 4.My second problem is that when I watch a video on Youtube or Facebook it keeps stopping for some seconds and then it plays normaly like it should.The third problem is that some apps change their look sometimes.What I mean is that the Calendar app sometimes takes a look from another app on the other page.So the calendar app sometimes looks like Minion Rush app.The calendar app isn't the only one app which does that.The fourth problem is that sometimes I can't acces the first page.My phone sometimes crashes when I try to swip to the first page.Does anyone has a solution for this or I will have to wait until next update in which they will maybe fix it ?

reset all settings
settings- general- reset - reset all settings
now reconnect to wifi
settings - wifi- click network name - enter password - join
if issue persists backup info and restore via itunes
Peace, Clyde

HT201210 Problem while updating to IOS 6

Similar Messages

Maybe you are looking for