HT201210 Problem with iphone 5 updating to ios7 with latest itunes. Error code 4005.
Anyone having issues with iphone 5 and itunes upgrading to ios 7 software. I do not have a phone right now because it will not restore and the phone is stuck on the itune and usb screen. Hard reset does not help. In itunes it will indicate it is "waiting on iphone" and after a few minutes it gives an error message that here is an unkon eroor. Any suggestions?
I had to uninstall itunes, deleted files in my music libary- renamed my itunes music file to tunes. Then installed itunes 10.7. Finally plugged phone back in and restored. Now it is working but what a pain.
Similar Messages
-
My PC won't sync with iphone 4s or ipad after latest itunes update
When I plug it in, it asks to trust the computer. I have uninstalled and reinstalled itunes. I have tried different usb ports and turning off the firewall.It was working ok til the latest itunes update.
Did you click on Trust? What happens when you do? When you removed and uninstalled iTunes, did you use this support document and follow the instructions exactly? http://support.apple.com/kb/HT1923
-
HELP ME PLEASE!!! iphone 4 fails to restore via itunes, error code -1
okay, so i have an iphone 4 and i updated it to ios 6.1, it failed to do so and shows the arrow and asks to connect to itunes. im freaking out, because the last time i tried connecting to itunes, it restored my software, now i does not. it keeps showing error code -1.
i checked on apple website, it says it may be due to security settings and asked to turn off firewall. but my macbook pro has firewall off, also mine is a new phone, not jailbreak. ive tried everything. nothing works. there r hundred other threads out there on the same error... nothing works... i tried all...
help me someone... PleaseeeeeeT Aprigliano wrote:
Apple warranties/services the device not the person.
So as long as it's within it's 1 year coverage you'll be fine.
Apple Warranty
http://www.apple.com/legal/warranty/
iPhone Warranty > The warranty is only good in the country of original purchase -
HT4528 disabled iphone and attempting to restore. itunes error code 3194 can not restore
i phone is disabled. tried to restore using itunes. holding down the two buttons. connecting to itunes and trying restore. itunes comes back with 3194 error.
helpPossible causes
You are trying to install a version other than 7.0.6
Your antivirus or firewall is blocking access to gs.apple.com
Your phone is jailbroken
Your computer was used to jailbreak or hack som other iDevice in the past
See: http://support.apple.com/kb/TS4451 for possible remedies. -
Got new computer with windows 8.1 and installed latest itunes, went to update music library on my nano 5th gen and plugged in recognized in my library but when it synced , it said sync was complete but did not update at all, then reset the ipod to factory , BIG MISTAKE plugged in again and it did the same thing except now I have no music on at all it syncs but will not put any music on , previous computer had xp on it, what would the problem be and what would solution be????
Thanksc) unistalled and reinstalled iTunes
Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8 -
i am using i5,updated to ios 7,problem is after updated to ios7 whenever i conncet my phone for charging, at first notification i am getting is "this accesorries is not supported on this device", but phone is charging, before switched to ios7 it was ok, i am getting this notification each time i am connect my phone for charging, or laptop, why i am getting this?
I am not using extra cable for charging the phone or sync to pc, one cable which came with the phone.it was a full intact box. Which i use for charging my phone and also i am using that cable for sync to my pc, when i was using ios 6.1.4 at that time that notification didnt shown up in my phone,it was ok, when i switched to ios7, i have started getting this notification, my friends are also using i4, i4s, and i5, they are also updated to ios7, but they are not getting the notification which i am getting in my phone after connecting my phone with the cable, so what is the solution? It will be very helpful for me if you give me any plz...
-
Podcasts from Current Tv, since three weeks prior to the Nov 2012 election have had a url problem and cannot be played on my mac mini 2011 with 10.8.2 and the latest Itunes? anyone know why> ? I am in contact with Itunes now and they wanted screenshots of the problem, I can get these current tv episodes with a vpn and my isp says they are not blocking them, but i was surprised that prior to the election they were blocked, ?
I also can get them on my Android Samsung Galaxy note 2 with no problem but on the Macmini cannot>/? I Unsubscribed and subscribed many times but still no luck, any ideas? I am waiting for the senior advisor to get back to me on this issue. I am in THailand now where the problem is happening and as I said the ISP says they do not block any podcasts.I also do not want it on my iphone 5, so I have to wait and see why the mac mini is not getting it.I seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?
-
My iPhone 4 will not sync my new voice memos from the "Voice Memos" app to my computer. This is frustrating, should not be so hard, can someone please help. I use PC with windows 7 with iPhone version 6.1.3 and iTunes most recent. Thanks.
In the Music tab of iTunes, do you have 'Include Voice Memos' checked?
-
I cannot share photos with anyone ,for i select someone i get error code 400.
I cannot share photoss with anyone for when ii try to select someone i get a error code 400.
Version 9
"domnic.rj23" <[email protected]> wrote:
domnic.rj23 http://forums.adobe.com/people/domnic.rj23 created the discussion
"Re: I cannot share photos with anyone ,for i select someone i get error code 400."
To view the discussion, visit: http://forums.adobe.com/message/5781697#5781697 -
HT4623 how do i get past error code 4005 when updating to iphone 6 on itunes
how do i get past error code 4005 when updating to iphone 6 on itunes
Try the troubleshooting for that error code on this page : iOS: Restore errors 4005, 4013, and 4014.
-
IPhone 5c is stuck in recovery mode! (error code-4005)
I recently had my phone fixed for water damage and a broken screen (not by Apple) and i got a new battery for it on ebay (brand new) i fitted it this morning and i couldnt get signal although my actual phone was working, all it kept saying was (searching...). i rang my carrier and they tried to send me a message but nothing came through. my carrier put me through to apple and they told me to back my phone up and that is when things started getting bad. now my phone is stuck on recovery mode, i have tried to restore it 7 times and it says "itunes cannot restore and update (iphone) with an error code (4005)
This article may help. http://support.apple.com/en-gb/HT201444
-
TS3694 I have an Iphone 3G and trying to sync: Getting error code OxE8004002
I have an Iphone 3G and trying to sync: Getting error code OxE8004002 . Please provide info on how to resolve.
The iPhone 3G cannot be updated beyond iOS 4.2.1.
-
Since installing the latest update my mother-in-law gets Error Code VM502 when sending to only 6 recipients. This didn't happen before the update.
The error came from your providers server. You need to ask them why they are setting limits.
Thunderbird does not have any limits. -
Having a constant error when downloading latest update for Illustrator CC, error message:
Adobe Illustrator CC Latest Updates (December 2014) Installation failed. Error Code: U44M1P7U44.. update error http://forums.adobe.com/thread/1289956 may help
-more U44.. discussion http://forums.adobe.com/thread/1275963
-http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
-http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html -
The Installtion of updates for Photoshop CS6 failed. Error code for Update of Adobe Application Manager is U44M1P210, for all other features (Adobe Bridge, Photoshop CS6, Camera Raw) U44 M1U5
You go Photoshop CS6 > Help > Updates ...
-
Photoshop Camera Raw 7.4 update is not installing because of error code U43M1D207. What needs to be done to resolve this issue?
If you need to post again, please keept the following in mind:
BOILERPLATE TEXT:
Note that because this is boilerplate text, not all points may apply to any given, specific poster.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!
Maybe you are looking for
-
Define a default placement option
Hi everyone, I've created a dropdown in Flash Catalyst that needs to have its images updated once a week. That's easy enough to do because there's a handy option in Flash Catalyst to "edit images in Illustrator" Once in Illustrator, I can then simply
-
Dear All, Is there any way to add "Inspection lot" as an Object link in DMS ? Kindly let me know. Best Regards, Rahul
-
parsing xml file and then getting data from xml is ok but is there any api that support xml file generatoion from data itself help plz
-
Lumia 620 - HERE Maps refusing to install
So, my Lumia 620 came without HERE Maps (But it has HERE Drive+ and City Lens) so I decide to download it, it finishes downloading and it stops and tells me to open the download page and look at it, and it says that it could not be installed, showing
-
IMAP/Gmail/Mail.app strangeness: what am I doing wrong?
I have two IMAP accounts on Gmail servers, one through my university and the other being my personal domain with Dreamhost. When mail is received on both accounts, it does not always go into the respective inboxes. Rather, it is directed to the respe