HT201210 Problems with upgrading and "auto" synch

I have an iphone 4S and my partner has an iphone 4. We share the same Apple ID. She just accepted an upgraded (had been holding off because of the maps situation) and now our address books have synched!. Also, we receive a copy of the text messages we send each other. It seems our phones have merged and we want things back to normal! Any ideas on how to "separate out" our own phones? Thanks so much!!

hey asafbar,
curious to know, was there and problem with just installing version 4,23 immediately instead of uninstalling the previous version ?
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Similar Messages

I have a early 2011 Macbook pro 13 inch, I'm running Lion 10.7.4, and i want to upgrade to 10.8 Mountain Lion. Is it safe for my computer or are people experiencing problems with displays and Battery life?

I have a early 2011 Macbook pro 13 inch, I'm running Lion 10.7.4, and i want to upgrade to 10.8 Mountain Lion. Is it safe for my computer or are people experiencing problems with displays and Battery life?
Do Not post stuff about how Airplay doesnt work, because i dont have Apple TV and dont need to hear about it.

If you have an external drive equal to or larger than your internal HD, clone your internal to it with either Carbon Copy Cloner or Super Duper. Test the clone to make sure it's bootable. Then upgrade either one. Try it out first.

Since I upgrade my iphone 3gs to ios 5.1, I have several problems with network and wi-fi, any solution?

Since I upgrade my iphone 3gs to ios 5.1, I have several problems with network and wi-fi, any solution? (No jailbreak)
Most of the time the iphone cannot reach any network and when it can, there is no data transfer, I can only make calls and sms.

Skizofrenias wrote:
Since I upgrade my iphone 3gs to ios 5.1, I have several problems with network and wi-fi, any solution? (No jailbreak)
Most of the time the iphone cannot reach any network and when it can, there is no data transfer, I can only make calls and sms.
iOS: Troubleshooting Wi-Fi networks and connections
iOS: Wi-Fi or Bluetooth settings grayed out or dim

Has anyone had problems with upgrading iPhoto. I am, it's stops at 5 0f 9 and will not finish!! Can someone please help me out?

Has anyone had problems with upgrading iPhoto? I am, it stops at 5 of 9 and just stays there and won't finsih. Can someone please help me out?

iphoto upgrading: Apple Support Communities
iphoto upgrade hangs: Apple Support Communities

Upgraded to mac os x maverick 10.9.1. Any suggestions on how to fix problems with audio and video bugs?

Having problems with video and audio delays for mac ox x maverick 10.9. Are there any ways to fix this?

I also noticed that if I wiggle my mouse around while I watch video streams the video&audio is significantly smoothier.

Problem with installing and running some applications or drivers

When installing and installing some items, towards the end of the installation I get this message:
/System/Library/Extensions/comcy_driver_USBDevice.kext
*was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?

Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
+was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there.

Problem with DMGs and error: "No Mountable File Systems"

Problem with DMGs and error: "No Mountable File Systems"
The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
Recent programs includes:
1) upgrading from Parallels 5.5 to 6.0 on both machines.
2) using an HP secure II usb drive and setting up a secure disk.
3) installing new itunes 10
4) new update to Flip For Mac.
The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
Message was edited by: remaia

Where you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it

Problem with yosemite and parallels

Since I have upgraded to yosemite and parallels 10 my windows 7 has been using a lot of CPU resources. Windows 7 runs very slow and it been using almost constantly 100% of one of the quads resources. This just started to happen when I upgraded, because I did not have this problem with Mavericks and Parallels 9 or 10. I have an iMac 2011, 8GB of Ram. Has anybody had this issue. Thanks.

Thanks for the response. I was searching on a parallels forum website and found the following:
As from the symptoms, the issue can lie in NVRAM preferences of your particular Mac.
Please do the following to solve:
open Terminal application on Mac (Applications/Terminal.app)
please type this command (you may copy-paste it to the terminal from this message):
sudo nvram boot-args="debug=0xd4e"
Hit Enter.
You will be prompted to enter Mac user password. Please type it and hit Enter.
Note: you won't see what you are typing, just type and hit Enter. If you don't have Mac user password, please create a temporary one.
Then you may restart your Mac and the issue should be solved.
If not - please reply me here and I'll create a ticket for you in Support.
I did the above and it seemed to correct the problem.

Problem with JRE and Yahoo applets

Hi, I couldn't find any answer for this anywhere else...
Whenever I try to play a Yahoo game, certain windows will "shake". For example, if I log into yahoo, then go to play their spades game, the applet will load without any problem. The game room will appear and everything seems to be fine. But if I click on the Start Panel, the borders of the Start menu will "shake" If I right click on anything, that menu will also shake. This only occurs while JRE is running the yahoo applet. Once I leave the yahoo game, everything returns to normal. If I use IE and MSVM, this problem does not occur. This problem does not seem to occur with other instances of Java either. Only Yahoo games. I tried searching Yahoo for an answer to this, but didn't find anything. When I tried getting help from them, they replied with an email to update Java and/or my browsers. Well, I am using version 1.4.2_04 of java, and have IE6 updated as of today. Also, I am using Opera version 7.54 and Firefox 0.93. This problem with Java and Yahoo occurs no matter which browser I am using. The only way to keep this from happening seems to be to use IE with MSVM. Any ideas?

That page does apply. Everything that you have written indicates conclusively that the Yahoo game you're playing is the source of the problem. The fact that it works with the MS jvm but not with the Sun jvm, that the Sun jvm works with other Java applets, etc all say the same thing - that Yahoo applets wer/are coded to work with the MS jvm, which uses MS extensions in violation of the Sun/MS licensing agreements. The statement at the bottom of the page is proof positive - your spades game is not listed by Yahoo as being fixed.
"07/17/03 - From Yahoo! Customer Care:
We have deployed a fix for the incompatibilities with the Sun JVM� in the following games:
Chess Gin Cribbage Euchre Bridge
Hearts Toki Toki Boom Graffiti Pool
We plan to upgrade the rest of the games on an ongoing basis. "
The Yahoo applet is the problem and requires repair...

[Problem with U310 and W8] Deinstalled my WuDFRd-Drivers

Hey,
i just set up my new u310 with windows 8 and it worked fine. Then i realised, that on startup it takes about 4-10 minutes to search for wifi and i began struggeling around with things... deinstalled some drivers, reinstalled them again, just to see which drivers collide because the wifi service didnt start on startup.
Then i saw a message on my system which was timed around the startup time and it said "The driver \Driver\WUDFRd failed to load for the device ROOT\LENOVOVHID\0000.". I looked it up on the internet and i saw that few people had the same problems with the long startup and similar things... so i just deinstalled the "Windows Driver Package - Lenovo WuDFRd Drivers" to reinstall a newer version or something like that.... but problem is, Where can i find this Driver package? I just cant find it. Will the startup problem be solved with a new installation of these drivers? Please help me

Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
+was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there.

Problem with ssh and bash-completion

I and a co-worker are having a weird problem with ssh and bash-completion. We have a local config in .ssh/config with hosts we connect everyday. An example:
host foo
hostname foo.org
user foobar
host foobar
hostname foobar.org
user foobar
When we try to type
ssh foo<tab><tab>b<tab>
the console just freeze and we can't type anything, everything we type is ignored, but after about 30 seconds the host is completed.
This works a some time ago, so some upgrade make this happen. Anyone can reproduce this?

quigybo wrote:
Actually thinking about it, rather than using the semi-dodgy fix posted on the bug tracker, we can just test if the daemon is running since we are not on MacOS X. It is cleaner and 250 ms quicker.
--- bash_completion.orig 2010-09-14 05:33:22.000000000 +0930
+++ bash_completion 2010-09-14 05:45:04.000000000 +0930
@@ -1316,10 +1316,12 @@
# contains ";", it may mistify the result. But on Gentoo (at least),
# -k isn't available (even if mentioned in the manpage), so...
if type avahi-browse >&/dev/null; then
- COMPREPLY=( "${COMPREPLY[@]}" $( \
- compgen -P "$prefix$user" -S "$suffix" -W \
- "$( avahi-browse -cpr _workstation._tcp 2>/dev/null | \
- awk -F';' '/^=/ { print $7 }' | sort -u )" -- "$cur" ) )
+ if [ -n "$(pidof avahi-daemon)" ]; then
+ COMPREPLY=( "${COMPREPLY[@]}" $( \
+ compgen -P "$prefix$user" -S "$suffix" -W \
+ "$( avahi-browse -cpr _workstation._tcp 2>/dev/null | \
+ awk -F';' '/^=/ { print $7 }' | sort -u )" -- "$cur" ) )
+ fi
fi
# Add results of normal hostname completion, unless
This is the same test as was used in bash-completion 1.1.
Thanks quigybo, I use your patch, the issue is gone
Why does so many packages depends on Avahi? Maybe make it optdepends is
enough?
my laptop $ pacman -Qi avahi
Required By : gnome-disk-utility gnome-vfs libcups mpd sane

Problem with upgrade Windows 2003 to Windows 2008

Hi,
I have problem with upgrade Windows 2003 to Windows 2008 R2
When I run installer it check compatibility drivers and programs after that appear message that I need to uninstall "adaptec storage manager" but I already remove this driver from the system and registry.
Any ideas to solve this problem?
My server it's IBM System x3500
Regards

Not sure if this issue was solved or no longer relevant, but I had the same issue with the same IBM x3500 server type.
Based on the SETUPACT.LOG output from the Server 2003 to 2008 upgrade compatibility check, the problem was that the driver AACMGT.SYS is unsigned, and hence not acceptable for running in Windows Server 2008.
AACMGT.SYS is a part of IBM ServeRAID but unfortunately, even the latest versions 9.3 to not seem to update or replace this file. It's also possible this file is a residue of an earlier, deprecated version of ServeRAID, I don't know.
In the end, to get passed the Upgrade check hard stop, I did this, though I'm not sure if all steps are needed:
0. Make sure you have a system backup in case you break something doing this steps. If you do break your system and cannot recover from backups, it's not my fault!
1. Go into Device Manager --> Disks and check the Driver properties for the disks on your system. You might have AACMGT.SYS listed for some/all disks and also listed as unsigned.
2. Uninstall IBM ServeRAID from the system, just in case
3. Do into Device Manager and go under Disks, and manually Uninstall all the disks in the list including "AdaptecArray SCSI Disk" and some other secondary. I did not reboot right away.
4. Go to console, go into C:\WINDOWS\SYSTEM32\DRIVERS, and rename AACMGT.SYS to something else.
5. Reboot the system and hope it still boots. Go into Device Manager -> Disks and make sure that AACMGT.SYS is no longer listed.
6. Run the 2003 to 2008 Upgrade process again. The Compatibility checker should no longer flag "Adaptec Storage Manager" as a blocker.

Have to re install elements 11 & premiere elements 11. cause problem with upgrade windows 8.0 to 8.1

have to re install elements 11 & premiere elements 11. cause: problem with upgrade windows 8.0 to 8.1. Lost all software and data.
how to re install elements11. (downloads purchased in your store 2013-05)
[email protected]

have to re install elements 11 & premiere elements 11. cause: problem with upgrade windows 8.0 to 8.1. Lost all software and data.
how to re install elements11. (downloads purchased in your store 2013-05)
[email protected]

Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....

Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....is there some trick I am missing or do I need to make an appointment with a genius...

I have the MacIntosh volume and the Boot Camp partition only. I know that when I installed Lion, I had to go through a whole back-up and recovery of Windows and then re-format the drive.
The tech at the Apple Store had a previous life as a MSCE and was very helpful. I believe he even said that I should not have htis problem with Mountain Lion which is why they gave me the flash with it onboard. I was in the process of starting a new job when I went to Lion, so I have waited to do this next and probably last upgrade to this old MBP since I doubt Apple will support this MBP in Maverick.
I do not have another installation, so that is not an option. I will try to create an external, I have plenty of hard drives around and see if I can get it done that way. It might take me a week or two to get back to it, but I will comment back upon completion of that effort. Thanks for your help....Dave Iverson

Problems with upgrading firmware in Zen Micro 4

I am currently having a problem with upgrading the firmware on my Zen Micro 4 GB. The Zen Micro seems to hang right after the first reboot, therefore not finishing the whole upgrade. I am currently trying to upgrade to 2.2.02. It seems that whenever I try to reboot the Zen Micro while it is connected via USB, it hangs at the Creative Logo and I have to end up resetting the system. Oddly enough, I have a second Zen Micro that I was able to upgrade the firmware with no problems whatsoever. Any suggestions?
P.S. I do have Windows XP SP2 with WMP 0 installedMessage Edited by Hubmasterflex on 0-07-2006 04:23 AM

Try using reload OS in the recovery mode to erase the current firmware, then connect to the PC and reload. You take a risk doing this though as if the firmware won't reload from the PC you'll be left with an effecti'vely useless player, and you'll have to contact support to get a replacement.

HT201210 Problems with upgrading and "auto" synch

Similar Messages

Maybe you are looking for