HT201210 Restore iPhone 4 to iOS5??
I tried to restore ios 5 to my iphone 4. Dont' like current versioni of ios 6. Received message that device is not eligible. It was an ios 5 device until I updated it to 6. Apple won't let me restore it?? Not impressed with the new Apple Inc. since Jobs demise. May have to sell my stock.
Here is a link to revert your phone. http://appadvice.com/appnn/2011/07/how-to-downgrade-ios-5-to-ios-4
Hope it helps and if you decide to voice an opinion other than apple is great be careful because simple minded people are on here too. Also if u google iOS 6 problems with i4 your not the only one with this problem. There are thousands if not millions with the same issues.
Similar Messages
-
HT201210 restoring iphone 4, but keep getting error 2001 message
i am trying to restore iphone 4, but it wont let me, it keeps giving error message 2001, please help me anyone
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service. -
HT201210 Restoring iPhone 4s but I can't?
Hi everyone.
I have a jailbroken iPhone 4S but I want to restore it from the start and completely erase everything. I have followed instructions from this site : http://support.apple.com/kb/TS1275 . Further more, I have already tried restoring under DFU mode. But this is always the result.
How can I solve this problem? Thanks a bunch!springvivi wrote:
I have a jailbroken iPhone 4S
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
http://support.apple.com/kb/HT3743 -
i tried to upgrade my iphone 4 to ios5 yesterday in the installation process my iphone stopped process and the actuall phone itself has frozen what is showing is the music note icon over a CD disc icon with an arrow pointing upwards and a picture of the usb cable small end . i have gone back into itunes on the left side and nothing comes up for list of devices to restore it or reset it back to prior upgrade attempt. i cant even locate the serial number under edit preferences and devices.. however it shows that all my music was imported and synced .. how do i recover the i phone so i can go back to using it.
From iPhoneWiki:
Try changing the USB port (the back one of chassis is better) and restart computer.
The installed version of iTunes may also be too old. Update iTunes.
Also put your iPhone in DFU mode when doing the above and restore. It's a software error. -
I want to do a factory restore on my iphone 4s but I do not want to the iOS6. If I back up, can then restore backup and keep iOS5 since a factory restore will automatically upgrade me?
Found the answer myself. Thanks for the help!
-
i have an iphone 4 and i just updated to ios5 and i can't get my music to stay on my iphone and i also keep getting and error message when trying to restore iphone. anyone else having this problem?
When you restore, which error # appears?
-
QUESTIONS: I have an iphone 3gs.just updating to ios5. am at the stage where I chose to restore iphone via itunes. sync seems stuck at step 7 of 7: syncing artwork. Is this necessary and if not how do I get around it?
When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.
-
After upgrading the iPhone 4 to iOS5, the camera icon doesn't appear on the lock screen. How do I get that? I've already tried restoring...
My photostream doesn't sync to my Mac Air either...And to continue the help:
The User Guide is available at http://support.apple.com/manuals/ or downloadable from iTunes as an iBook. -
I have just update my iphone 4 to iOS5 and it did all the usual restore stuff. The next time I connected to my Mac instead of syncing it started to restore again, thus locking my handset, any ideas?
This indicates corrupt files. A restore should resolve.
You might want to try a simple sync first -
My iphone says it needs to be restored but when i try to restor it it says it cant be restored and it has an unknown error
Hi folks, just yesterday i can restore my iphone 4 that have a problem when i restore from itunes, when i do the restore from itnes, always showed me the following error:
01:41:37.0017] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: -1
[01:41:37.0017] Depth:1 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - Failed to handle message type StatusMsg)
[01:41:37.0017] Depth:2 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - failed to update device firmware)
[01:41:37.0017] Depth:3 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - ramrod firmware update failed)
[01:41:37.0017] Depth:4 Error:The operation couldn\U2019t be completed. (RamrodErrorDomain error 1004 - update_baseband: failed to perform next stage)
[01:41:37.0017] Depth:5 Error:Exception at :0:
[01:41:37.0017] - kBBUReturnTimedOut(8)/16: Pinging timed out
what I did was this: just when I will finish the process, when the status bar is at the end in the firmware, only put the sim card and go back to take out, I do this like 4 or 5 times and the process restoration ends so well. This method I tried it 2 times and 2 times worked. I spent like 10 hours trying to restore iphone without results, until I started watching the logs and the key is when you are upgrading the firmware sends a command to answer yes. And I hope this helps.
This is the line of the log that appears and when the restoration is correct:
amai: AMAuthInstallBasebandHandleUpdaterStatus: commandAccepted: YES
Regards. -
itunes has detected an iphone in recovery mode. You must restore iphone before it can be used with itunes.
Has anyone been able to restore their iphone after updating on itunes?Probably over 200 million people have been able to restore their phone after updating on iTunes. 400 million if you consider that many people have updated more than once.
Have you restored it as directed? I gather from the fact that you posted that you tried and something went wrong. If you post what you did and what went wrong, including the error message and error number, we can probably help get your phone running again. -
My iphone is asking me to connect to itunes , once connected i am asked to restore iphone, when i click restore it comes up with a box saying there is an error,
Please helpHi charliew1,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting steps in this article helpful:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Best,
Jeremy -
HT201210 how to fix restore iphone 5 error (1)
when i restore iphone 5 with ios 7.0.4 error (1) how to fix ???
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020. -
HT201210 Unable to restore iPhone
My iPhone is saying that it cant be restoredbecuase of an unknown error (2001)...How do I fix this?
Try to follow below two ways to restore iPhone:
1) Connect your iPhone with computer using bluetooth or USB Cable.
>>Open iTunes
>>Go to "Storage"
>>Click on "Backup and Restore"
>>Wait for a moment.
Your contacts will be restored.
OR
2) Open iCloud.
>>Enter Apple id and password.
>>Go to Storage and Backup
>>From there Restore your contacts.
>>Close iCloud.
>>Restart iPhone.
You are done.
<Link Edited By Host> -
HT201210 iam getting a error message code of 3194 when trying to restore iphone 4 on itunes
iam getting a error message code of 3194 when trying to restore iphone 4 on itunes
http://support.apple.com/kb/TS3694
Maybe you are looking for
-
Recently sent my iPod touch 4 generation into a local place for a battery change, and now it's suddenly swapped the lock button and lower side volume button. The lock button now turns the volume down then locks, and the volume button turns down and l
-
Is it possible to have a "double set" of audio outputs?
Hi! When working in our studio we use 3 daisychained FP10's as audio interface and an analog Soundcraft Ghost mixer. In Logic I have the outputs of the different tracks assigned to the 24 outputs of the audio interfaces. So when I playback I can do t
-
Hi everyone! i have just bought my laptop 2 days ago...and there are problems yet :-/ There are no speaker sound. First time there was sound on speaker, but i connected a headphone to it. It sill worked, but after i disconnected it, there was no more
-
Please help me with java packages...
Hey guys, Im pretty new to java and I have some questions on packages. My friend gave me a bunch of .java files. Now, each of the files has package edu.nyu.sejava.gc.util; as the beginning. I know that the package name = directory structure but Im no
-
Catalyst 6500 VS-S720-10G and VRF Capacity
Hi, I have at the 6500 with vs-s720-10G. the datasheet say 1024 VRFs each populated with up to 700 routes/VRF for MPLS. MPLS in hardware to enable use of layer 3 VPNs and EoMPLS tunneling. Up to 1024 VRFs with a total of up to 256,000 routes per syst