HT201210 Restore mode
problem while trying to update my iphone 4 said would go to restore mode does that mean i loose all my music, texts and photos?
If you sync the phone with your computer or iCloud regularly you won't lose anything when you restore.
Similar Messages
-
HT201210 Restore mode after update
I downloaded the new update for my iphone last night and this morning itunes tells me I must RESTORE and lose all my photos! Help!
Sometimes an attempt or two is necessary. Here are some tips on "device not recognized by Windows"
http://support.apple.com/kb/TS1538
If that doesn't work, look up dfu mode on Google. Dfu mode puts the device in a status where it is recognized by iTunes but has no screen display. If you have to take this step, be prepared to try it a time or two to make it work. The key will be that it is detected by iTunes, as being in recovery mode, but there will be no screen display on the device. -
I tried to update my iPad 2 with the iOS 6.0. Now I am stuck in restore mode. I get "unknown" errors 3014 and sometimes -1. Any ideas?
Try a hard reset: hold the power and home buttons simultaneously until the Apple logo appears.
-
My iphone has gone into restore mode after accidently pressing backup. It tells me i will lose all my data. How to i get back into the phone and not lose my datea
i havent backed up in ages (yes i know thats flakey)Birdman01 wrote:
My iphone has gone into restore mode .... How to i get back into the phone and not lose my datea
It is all too late...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
I was updating my iPhone 3g from iOS 4.1 to 4.2.1 when suddenly I lost network connection and the process failed. I have since tried to restore my iPhone 3g with no luck. I keep getting the error code 2009. Which instructs me to check my computer is up to date and all third party security software are turned off. I have done all these pulled out all usb devices but for the one that is my internet modem. I am running Windows XP Pro SP2 on HP DC500 minitower. How do I get out of restore mode. Thank you kindly.
Not sure if you were told what error 2009 is caused by so I'll let you know if you havn;t been informed. In the article http://support.apple.com/kb/TS3694 is says:
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service. -
Hi folks as in the title:
My Ipad 4 froze up and rebooted automatically numerous times.
It then immediately froze up completely and didn't try and reboot itself.
I then hard restarted the device using the home and power buttons simultaneously.
I got the Apple logo and saw my desktop for a moment and then it froze up.
Hard rebooted again only this time I saw "connect to iTunes".
I connected the device to my MBP and iTunes where I was told it was in restore mode.
I followed the on-screen instructions in iTunes to restore the device.
I spent 15minutes downloading the necessary files etc only for the restore to fail through error code '1600'.
I explored this error code in Apple support and followed all Apple's suggestions, and subsequently tried the restore each time.
I have now exhausted all fix options for '1600'...and I can't even get 'connect to iTunes message' on my iPad device now.
Any suggestions would be welcome please?
Kind regards.Thanks for the response Demo.
Unfortunately I don't have another computer with which to try a restore from.
I've tried to reboot the iPad again using the sleep and home buttons (whilst it is unplugged from my MBP) and it remains completely lifeless. I know there is 80% battery life in the device as I had it charging when it malfunctioned.
I've tried recovery mode through iTunes in excess of 15 times now all yielding the same and inevitable result of 'error 1600'.
I think it's time to get to know the team at my local Apple store... -
HT201210 my iphone hang on restore mode and error 1015
my iphone 3 is hanging on restore mode and while restoring is showing error 1015
Error 1015 indicates the phone was jailbroken. You can not get help here. Discussing jailbroken devices is forbidden by the terms of service.
Jailbreaking voids the warranty and forfeits all rights to support from Apple and on these forums. You're on your own. -
I have an older 8GB black iPod Touch (no bluetooth) no longer supported by tech. It is "locked" in restore mode. When I do a 2 button reset I can get the Apple logo but then it pops back to the synch cord-and-music disc icon indicative of restore. Any advice?
Hello honeycrisp70,
For that error, check out the article below for additional troubleshooting to get it sorted out. If it continues then you may need to contact Apple support.
Resolve iOS update and restore errors
http://support.apple.com/en-us/TS3694
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Regards,
-Norm G. -
its almost 10 months,i purchased ipad2 32 3G wifi.itinially i got problem with applications and safari shut off frequently now since last 4 months my ipad starts with a message (connect iTunes)like first time start and going to restore mode and it occurs frequently.plz advise.
If you have followed the standard Apple troubleshooting processes (see user guide )
probably a trip to the local Apple Store Genius bar is called for before warranty runs out
Assuming the iPad has been released in your Country if not you may have to take it to a
neighbouring Country where it is available
This page will tell you ,via the drop down menu Countries that can support iPad
http://support.apple.com/kb/index?page=servicefaq&geo=United_Kingdom&product=ipa d -
My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.
Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors -
my iphone 4 is not responding the screen is just showing a usb lead and the itunes symbol. when i plug it into my desktop mac and try to sync it to itunes ,itunes is telling me the phone is in a restore mode. How do i get it to respond without restoring the phone to new ? there is no option to restore with backup as i have not backed up any of the data on the phone any help would be greatly appreciated thanks
http://support.apple.com/kb/HT1808
You can't not restore if you have reached this point -
Do I restore the old phone? What should I do?
it now says the old phone is in restoration mode and to restore iPhone.
Hmmm...
That's a doozy. I'll have to think on that for a bit.
Quite perplexing indeed. A quandary you could say.
Not really sure what you could try...
Have you tried anything yet? -
IPod Touch stuck in Restore mode. (I will give 2 months of person IT help)
+(I will give 2 months of IT help [windows/networks] if you solve this, 1 month if you help me- Im a IT Tech with a degree. - see profile)+
*I was trying to sync my iTouch and it blipped and everything was gone.*
*Now it is in Restore mode permanantly. When I attach it to iTunes, it recognizes iPod in Restore mode, but:*
1) If I try to use the original ( 1.7.7 ) ispw to restore ( with shift/restore), it fails at *Preparing iPod for Restore* and says *iPod can not be restored. Error [various]*
2) If I try to restore to the new (3.0) ispw it fails with *Network Time Out*
3) If I try to use the 3.0 which I have already downloaded ( with shift/restore) another error #1431 occurs during restore.
4) I can not update to iTunes 8.2 as when I try it gets to the end and then says that it can not access the registry key for 'itpc' or similar due to permissions, when I open regedit to look at these keys I also get an error saying that I cannot access the keys due to permissions. I have tried opening in admin account and still "permissions not allowed", I have tried running iTunes though admin, still the same. I also can not alter the permissions even when I am at the highest permission level.
It isnt even seen by iTunes unless I enter DAC mode. Then it askes to restore it but fails every time!
+The USB has no faults showing and I updated all of them to be sure.+
+Everything was fine before this. Running firmware 2.0 or 2.2 ( cant remember or access it ).+
+I dont want to delete the iTunes as Im worried it wont be able to install again and I will lose everything. ( and thats ALOT!)+
+I REALLY need my iPod.+ I use it for work, +I work with disabled children as my 'real job'. IT is just extra $. _All my contacts, emailing etc is trapped now in a iTunes that just refuses to work_.+
As this is SO important to me and the children I work with I am offering:
*THREE MONTHS OF PERSONAL TECH ASSISTANCE FOR WINDOWS AND/OR NETWORKING PROBLEMS FREE OF CHARGE. ILL GIVE YOU MY EMAIL AND IM AND WILL BE YOUR PERSONAL IT GUY FOR 3 MONTHS IF YOU CAN FIX THIS! IF YOU CAN EVEN GIVE ME A USEFUL IDEA, ILL GIVE YOU 1 MONTH OF FREE HELP! PLEASE HELP ME IF YOU CAN!!!*What type of security software suite are you running on your Vista computer? If it is one of the commercial ones, Norton, Mcafee, or the like, you are most likely suffering from the over zealous nature of these programs.
Are you sure you have top level admin access on your Vista computer. The fact that you can't use regedit to remove keys bothers me somewhat. But this is something for you to worry about. Here's what I would suggest you do:
1. Remove all Apple software from your computer - iTunes, QuickTime, Apple Mobile Device Services
2. Reboot
3. Disable your firewall and virus checker.
4. Download and install the latest version of iTunes.
5. Re-download the 3.0 update
6. Plug your iPod in and install the 3.0 update
If everything is working, then you can re-enable your virus checker and firewall software.
The most likely reason you have had all of these problems is the fact that Apple software needs to "phone home" during the firmware install. If it can't do it because of your firewall, then you are going to get various error messages and no success. The anti-virus software often prevents complete downloading of a file - again leading to errors. -
Hi,
I erase all application of my iphone 4 with erase restore without any backup & i also lose the product serial number. Now it's in restore mode. Now is there any way to restore my iphone without backup. Please help me. I have no need my previous file I just want my iphone4 ok and work smoothly as like new ipone justlike i bought it at first time. I can't restore it. So Please help me to solv this proble.See Here > without the Backup > http://support.apple.com/kb/HT4137
-
tried to get my phone out of restore mode after i upgraded the firmware on itunes but now it wont budge and is stuck in restore mode ive tried evrything from pressing power and home button to downloading firmware and trying to restore it that way but half way through restoring a error message comes up. I am now stuck as to what to do next plse help
That often indicates a hardware failure. make an appointment at the genius bar and take it in for them to look at.
Maybe you are looking for
-
Hi all, I am doing an ALV through an user defined pf-status.But when I am using this pf-status I am unable to find the standard application tool bar and remaining also.I have seen some threads regarding this. These threads are giving me the sug
-
Keeps asking me for password over and over and over!!!
This is so annoying, I went to download new music onto my laptop which I had bought through my I pad and phone but after a little while it kept asking for my username and password, so I put it in about 5 times then it carried on ok for about 5 mins t
-
Images with transparent backgrounds in MDM
I've got several images in MDM with transparent backgrounds, yet when i look at these in image manager (or thumbnails in data manager) they look terrible. The transparency is black for example, among other issues. These images are all okay in photosh
-
I am 5.0 version firefox.
-
As I have said before, this is my first go-round with a tablet device. So far, I like it, but there are some rally frustrating learning curves that I have right now. Here is the newest...help! Yesterday, the tablet informed me that I needed a neces