HT201210 restoring iphone 4, but keep getting error 2001 message
i am trying to restore iphone 4, but it wont let me, it keeps giving error message 2001, please help me anyone
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
Similar Messages
-
trying to update to ios6 on iphone 3gs but keep getting error code 1403
Try updating over Wi-Fi:
Settings > General > Software Update. -
TS3694 I cannot restore my iPhone 4 I keep getting error 2001/6?
I cannot restore my iPhone 4 I keep getting error 2001/6?
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.
-
I am trying to restore an ipod, but keep getting error 3194. Tips?
Ipod = disabled
Recieve error 3194
Windows computerSee:
iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
How to Fix iTunes Error 3194?
How to solve iTunes error 3194 in 10 simple steps -
can someone help?????
See:
iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
How to Fix iTunes Error 3194?
How to solve iTunes error 3194 in 10 simple steps -
My cousin asked me to help with his IPhone 4. It will not do anything except show the Apple logo. I have tried to do a restore on it but keep getting the message "Unknow error occurred. (27)". What is this and how do I fix it?
iOS: Unable to update or restore
-
TS3694 i have tried to restore my iphone but keep getting error 1015 any suggestions
i have tried to restore my iphone but keep getting error 1015 any suggestion
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
-
I have an old i phone 3G and do not know the password for it. trying to restore it from itunes so my daughter can use it as an ipod but keep getting error code 1015, any help on how to get passed this please?
Hi ratcat14!
I have an article that can help you troubleshoot this issue:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden -
During setup of Iphone 6 I keep getting error message "cannot restore backup" from Icloud. I backed up my old Iphone 5 yesterday. Is it because of different operating systems? Please help. Thanks!
Does your iPhone 5 IOS is later than iPhone 6 IOS?
If true, you need to update your iPhone 6 before you can restore from your backup.
If not, is iPhone 6 connected to power supply? -
I can't submit the new itunes software to update my computer and iphone. I keep getting error 1667. Please help
Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
Macs that can be upgraded to OS X Mavericks
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps. -
im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor. I am using windows XP 32 bit, all the other computers in my house downloaded just fine, no problems, however this is the computer my iphone is set up to, ive tried doing a virus scan, windows update, downloading other things, updating everything possible, everything works fine, its just itunes that wont download, anyone have any other ideas?
Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that. -
iTunes keeps giving me the message that my iPod is currupted. I have restored the iPod and reloaded iTunes but keep getting the same message. What's weird is that my iPod will connect to another PC and that my PC will connect to my daughter's iTouch. Any ideas? My iPod was working with my PC for years and just started getting this error.
According to this article: http://support.apple.com/kb/TS3694
Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
B-rock -
My iphone 4s will not turn on or update. I keep getting error 2001
my iphone 4s will not turn on or update. I keep getting error 2001. What do i do?
From http://support.apple.com/kb/TS3694#error2001:
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service. -
Tried to update ITunes, but keep getting error: Service "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services."
So how do I get my ITunes back?Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I have installed Adobe digital additions and have tried to authorize but keep getting error message "Connection error" . The internet connection is working and I do have an Adobe ID can you help please.
I have been using Adobe reader for PC to download my eBooks but the eBook Vendor has switch to Digital Addition,this is from sjpt,
Try completely removing any authorization using ctrl-shift-D to ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your Adobe ID.
Maybe you are looking for
-
Can't installing facebook from iPod Touch and Itunes 9.1.1 from windows 7
Dear all, anyone can help me with my problem please...... I Can't install facebook from my ipod touch 8GB it mentioned "this program only run with iPhone" why ??? my other friend could install facebook to his iPod Second problem i can't run my iTune
-
Open file in Quark 7 and Finder text is scrambled
After I opened a Quark 7.31 document with font problems the text in the menu bar of my iMac running 10.5.2 got corrupted, starting words with 'x' or deleting the first character "Thu" on the clock read "hu" Apple menu also affected. Can an app mess u
-
Unable to view all photos in version 8.1.2. Can only see last 18 month.
Unable to view ALL photos in V 8.1.2 Only able to view past 18 months.
-
Count the number of records in a group
Hi , My requirement is to display in the BI reprt - records in Order Entry Line Items based on several conditions on the fields. If the above conditions do not returm any records ,show an error message - NO DATA FOUND. 1.checked in standard RTF templ
-
How do I input data for a switch parameter?
Complete newbie to powershell...I have set a parameter to be mandatory, but I am not familiar with the input format to make it work. My parameter looks like this [Parameter(Mandatory = $true)[switch] $isValid now when I run my code and it asks for t