HT201210 Software update problem...can anyone help?

I am trying to update the software but there is an error that tells me that the iPhone is not connected. However, it is. Does anyone have any advice

Update using itunes?
Updating using the ios device over 3g?
Updating using ios device using wifi?

Similar Messages

HT4623 trying to 4.2.1 to 4.2.3 but I dont see software update. Can anyone help?

trying to 4.2.1 to 4.2.3 but when I go to settings, general, I dont see software update. Can anyone help?

There is no 4.2.3 and over-the-air updating was introduced with iOS 5.0.
You will need to connect your iPhone to the computer you sync with. When iTunes opens click on the name of your iPhone under DEVICES on the far left frame. Move to the Summary tab to the right and click on the Update button.

N8 Maps update problem - can anyone help

Hi i connected to OVI and was told there were updated maps.
It stopped half way through update.
My N8 had all maps etc removed
I have decided to reload ,aps 1 by 1 to my device using OVI
However th "NETHERLANDS " map part downloaded and wont transfer to my device
I seem to be able to download others.
Sadly using Mobile broadband until i return to London and fixed Broadband Connection
Any ideas if i delete device maps again and try and download ALL does anyone think this will work.
I have not try SUICIDE REBOOT and dont intend to.

No i don't think you should do the hard reset, i remember first time when i decided to use the Ovi suite to update my maps, it wouldn't work, i just kept trying till finally downloaded all the maps to my N8, i'd say maybe uninstall the maps on your device and install it again and then try to download the files through ovi suite. good luck
Nokia N80
Nokia N82
Nokia N97
Nokia N8 Dark Gray- RM-596

Gmail on iphone was working fine until yesterday when it prompted me with the message cannot get mail user name or password for gmail is incorrect, i have tried deleting the account and re-created a new account, same problem, can anyone help?

gmail on iphone was working fine until yesterday when it prompted me with the message "cannot get mail user name or password for gmail is incorrect", i have tried deleting the account and re-created a new account, same problem, can anyone help?

paulcb, you're a genius, it worked, thank you so much, you don't know how much stress you have taken off my shoulders, I am constantly on my email in my iphone everyday. Thanks a million, take care. Robert.

I bought a new Epson printer WR-7620 on Saturday and the Air Printer is not working. I spoke to Epson and they said it is an Apple problem, can anyone help. Thanks Peter

I bought a new Epson printer WR-7620 on Saturday and the Air Printer is not working. I spoke to Epson and they said it is an Apple problem, can anyone help. Thanks Peter

Peter,
deggie gave you that link so you'd know that airprint is a reduced-options print system, designed for mobile devices (not Macs), and you need to use the specific airprint driver on the Mac when adding the printer if you want Airprint, no-options printing. Otherwise, select the "non-airprint" driver when you add the printer.
It may be helpful to Reset the Printing System to get OS X to find the right driver.
Mac OS X: How to reset the printing system - Apple Support
(And "not working" doesn't help us to help you - please give more detail next time)

How do I change DNS to Business Catalyst servers. I am having problems can anyone help please?

How do I change DNS to Business Catalyst servers. I am having problems can anyone help please?

What problem are you having?
Have you read this KB? - Domain name and DNS: Quick reference

TS1398 The wifi on my iPod doesn't work since upgrading the software to ios 6 therefore when I try to reset to the original settings I can't get my original software back. Can anyone help me with this?

The wifi on my iPod doesn't work since upgrading the software to ios 6 therefore when I try to reset to the original settings I can't get my original software back. Can anyone help me with this?

greeneygreeney wrote:
so you can't ever restore it to the factory settings? that is a big shame.
"It will ALWAYS restore to the lates available software.
You cannot downgrade."

I upgraded to Lion and now Safari doesn't work and the updater hangs so I can't install the updates. Can anyone help me with this?

I upgraded to Lion and now Safari hangs up and the updater hangs up so I can't install the update. Can anyone help?

Reinstalling Lion
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

Batch processing problems-can anyone help?

Setup: Quadcore, 4GB RAM, 4 internal drives all with plenty of space, Leopard OS, latest version.
Software: CS4 with Photoshop Extended; all updates installed. I also have CS3 installed; only use Bridge and PS in both apps.
Problem: Working in CS4. All edits/crops/corrections done in the Camera Raw window; all edits saved and viewable in Bridge. However, when I use Batch from the Tools dropdown (Tools > Photoshop > Batch), and check all the usual places, select an Action, select a Destination, and hit "Go", the results are totally weird. Some images process as expected, but many are at least two stops overexposed.
All individual files will Open, and can be Saved As manually; all works fine. That is in fact how my assistant and I got the job done tonight. The Batch Action is simplicity itself: Open, Save As (JPEG level 9), and Close file—but if I run Batch on the same files that can be opened and Saved As perfectly, it all goes crazy; three quarters of the files are totally overexposed, in blocks (10–25, roughly), and at random.
I have used the Ctrl + Alt + Shift after opening Bridge; I have run Cocktail; and lit the right incense. But this still will not work properly! Can anyone help???

Batching the same files in CS3 works perfectly, in terms of the processed JPEGs at least being correctly exposed, but the CS4-only edits (like the healing brush) are not recognised, nor are many, tho' not all, of the crops.
I have decided to deactivate and uninstall, then reinstall CS4, after upgrading to Snow Leopard. Usually, I wait for a few months for others to report on OS update interactions with CS and FCP, but since CS4 as installed was useless and I had done the usual resets of Preferences without any change to Batch Processing's reliability, I felt I could not be worse off.
So, after upgrading to Snow Leopard, I will reinstall CS4 (and all apps this time, rather than just PS and Bridge, as I usually do) in case there are soime weird unintended consequences of a Custom install.
Very frustrating and time-consuming, and I wonder what I might have done to create this problem—seeing as no one commented, I can only assume that this is an unique experience.
I will report back today, hopefully.

Connecion problems, can anyone help?

Hello,
Ive recently brought an 8900 from ebay, im with orange in the uk and have the blackberry addon data usage thingy. I've been usign it for a while now, and the connections seems really really slow. So kinda guessed, well GPRS sucks. But I've recently went into the browser settings, and switched from the default Internet to Orange World (wap) and this is like a zillion times faster. On the default it can take up to 2-3minutes for the browser to get off requesting and start loading the page, even on just google, yet on the orange world zip it loads in seconds. Whats the difference here? All my apps run slowly, presuming with the default settings, is there anyway to get these speeds up to that of the wap setting?
Can't understand why the default internet settings suck so badly. Have just updated all my software, done a reboot from scratch, redownloaded my service books and nothing its still the same. Can anyone help?
Many thanks,
Mike

Have you tried restart your computer and unplug your iPhone from the cable? I sometimes have this problems and I was told to unplug and re-plug the iPhone.
Hope it helps.

Printing problems, can anyone help? i feel so lost

I upgraded to tiger then the automatic software update took it up to 10.4.3
everything seemed fine til i tried to print on my trusty canon s330 printer...i just couldnt locate a driver for it
so i clicked on any of the ones in the pop up in printer set up browser menu and it did actually print
but only very faintly
so i clicked on another and it printed full colour but only at A5 (and yes i changed all the page sizes everywhere i can think of)
no luck...
so i have spent the last two days trying to print and have downloaded latest drivers and searched and searched on forums like this and tried various things and still no luck
i urgently needed to print some work and was desperate so went out and bought another canon thinking its about time i had a new one and i really love canon printers
got it out the box, downloaded the software and guess what??? the same thing is happening
it will print either faintly in b&w despite what is on screen
and only in a5 despite selecting a4
i could cry i really could
i can get my printer to show in the printer browser box throught the set up utility but it doesnt show my model to select a driver and you have to click on one of them...
i click on more printers and i get a spinning wheel and then nothing
am i doing something inherently and obviously wrong?
i tried reinstalling the tiger upgrade and just upgrading the canon printers through custom install but no joy
my mac has been on and restarted more times than i can bear
i rang canon and they said 'open the print center' in utilities but there isnt one???
i ended up stopping the call because i was not getting anywhere
i have been using macs for over 8 years, I can usually sort everything
i am perplexed
please please you lovely people can anyone help???
Happy new year from Louise

hmmm, i didnt have to install a driver, it seems, after 3 days of hair pulling and teeth gnashing I realised that the tiger would recognise the printer without me doing anything
but it took me a long time to get there
i couldn't see the wood for the trees
i just thought i would update my posting incase anyone else is suffering
i feel a bit stupid actually, especially after I lost my rag at the Canon helpline...

Major problem - Can anyone help?

Hi,
A couple of months ago I was downloading the OS update and my computer was turned off (at the plug) by mistake. Since then I can't load up properly in my own user (although other users can access theirs OK).
All I get is that the wallpaper loads on the desktop and I get a spotlight icon in the top right of the screen and the cursor wheel just spins - and that's it.
I can't use it or access my files. Can anyone help by telling me how I can:
a, fix the problem of loading up or
b, access my files from another user when they don't have priveleges.
Any help is appreciated as I have some important files I need to get hold of and can't.
Mac Mini Mac OS X (10.4.7)

Hi,
A couple of months ago I was downloading the OS
update and my computer was turned off (at the plug)
by mistake. Since then I can't load up properly in my
own user (although other users can access theirs
OK).
All I get is that the wallpaper loads on the desktop
and I get a spotlight icon in the top right of the
screen and the cursor wheel just spins - and that's
it.
I can't use it or access my files. Can anyone help by
telling me how I can:
a, fix the problem of loading up or
b, access my files from another user when they don't
have priveleges.
Any help is appreciated as I have some important
files I need to get hold of and can't.
Mac Mini Mac OS X (10.4.7)
Login as a different user, then find the folder on the hard drive where your files are, select this folder in the Finder window and "Get Info" on it from the "File" menu. In the Get Info window go down where it says "Ownership & Permissions" and select the "Details". Change the owner of that folder to the name of the user that you are logged in as. You may need to enter the administrator password to authenticate, this will give you full control (read/write) access to the files inside the folder as admin. Repeat these steps for each folder that has items you want to retrieve. After you retrieve the files you want, you should just do a re-install of the Operating system from the install disk. The system is most likely corrupt and beyond repair since the update was halted by a power failure.
Good Luck!

Jukebox Zen Xtra problems - can anyone help

Hi
I have a 30G Xtra Jukebox. Of the original memory I have about 7.5 G free. Problem is I cannot seem to use it. Everytime I transfer from media source the track number goes up but the memory counter stays the same. When I unplug the track are simply not there.
I have reformatted and reloaded, all fine until I want to add extra then the same problem. I have updated the firmware, cleaned the disk. All to no avail. Is there a maximum number of tracks that I can have, I thought that as long as I have memory I can keep recording?
Can anyone help. thanks.........................

The limit is around 6,000 tracks, but varies with the amount of tag data. Lots of tag data and it will be less.

IMac won't read software installer disk, can anyone help?

I have an old imac (grape 99-2000) it was equipped with ethernet and i was told to get an ethernet wireless bridge, however the software for the wireless bridge won't open with my current OS 10.1 operating system, is there certain software i need in order to be able to access this? Can anyone help? Thank you!

You don't need software at all and most manufactures don't bother with Apple compatible setup software. Instead search the manual for set up instructions for Mac operating systems. Basically you will be setting up your bridge by talking to it through a browser (Netscape, Explorer, etc.) by typing in an address to get to the bridge's internal menus.
Which bridge device is it?
Patrick

Saving Problem, can anyone help me?

To All,
I am having a severe problem with saving my GUI.
Due to the fact i have internal frames, i am using JDesktopPane, and i am trying to save the whole desktop, so that when i load it, i can add this desktop to the GUI again.
I do this action from the menu "save" and "open" option, but when i do it, there are a lot of exceptions, and does not work.
Am i doing this the right way? If not can anyone help me?
Thank You.

There are a lot of issues with saving off Swing stuff. Note all of the notes about swing serialization only be suitable for short term uses. Its hard to tell from your post, but it sounds like you might be trying to serialize it. The thing to do is to mark all of your swing stuff as tranient, and/or make it externalizable. Then, you save any important data and reset it when you readExternal (things like window position and so on) its a pain , but it should work and you will have more assurance that things saved will work in later releases. You can try different vairations of this, but I suspect the major errors have to do with you trying to save off iomages and so on. Really better to rebuild this stuff then try to unserailize it. More effecient too!

2.2.1 problems - can anyone help please?

I downloaded this new update last night and now I cannot sync music with my 2ng gen ipod touch. If I download a game from IT store I can sync this but it does not recognise any changes to my music folders etc. I have tried restoring ipod touch to factory setting (as suggested in previous topics) but when I sync it it is only recognising games and photos - I now have no music on ipod!! Can anyone help please!!??

Have tried:
1. iTunes restore repeatedly - it never finishes and I get error 1604
2. Tried alternative usb ports
3. Tried alternative pcs - both xp and vista
4. Uninstalled itunes, cleared registry, rebooted and reinstalled itunes
Still no change. If I went into Apple and booked a Genius appointment could I pay £140 for a new phone?

HT201210 Software update problem...can anyone help?

Similar Messages

Maybe you are looking for