HT201210 still i couldn't restore ios 4.3.3 on my device. Right now i am having ios5.1.1
Hi,
Here i have iPhone 4 & i updated it's ios 5.1.1 now i wana restore on my device ios 4.1.1 for this what i have to do?
for your information i gona through ireb but it couldn't complete. while ios extact on itune it's goes on verifying option & show unknown error(3194)
in this problem now what would i do?
kankri wrote:
Hi,
Here i have iPhone 4 & i updated it's ios 5.1.1 now i wana restore on my device ios 4.1.1 for this what i have to do?
Downgrading is Not Supported by Apple...
http://support.apple.com/kb/HT3743
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
Similar Messages
-
I attempted to upgrade the software on my iPad 2 and I got a message that said "unable to restore Ipad due to error". Now the iPad had a black screen with the Apple symbol and the processing symbol going around and around. When I tried to re connect it to iTunes is says "cannot connect to this iPhone due to error". How do I reset the ipad?
Please Get the iPad User Manual for iOS 5.
-
Help.
Try and force your iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device. -
iphone 4 says connect to itunes after updating with latest ios 6.13 but itunes says cannot connect can anyone help
Contact iTunes support.
-
just wondering
hopefully it will speed up my iPod touch 4th gen... maybeI'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums.
You may leave comments at Apple Feedback. -
I got a mail from apple that I need to replace my hard drive ( recall). I back up in my timecapsul and restore all my files. After I finished my restore files I realized that I did my laptop one....not desk top files so my desk top looks exact like my lap top.
I whole design program is different....I tried to restore files but I couldn't....whole system looks different....I need help...Im not good at using computer....I just need to back my desk top like previous one....please please help me
How to restore my desktop files.....How can I undo this step?? This is a night mare....please please help me.....Thanks for the comment Linc Davis. I really appreciate that. I tried do what you told, but it doesnt work....i need to start over like pc so i can get back my old desktop.....this is nightmare!!!! i dont know what to do.....command +R doesnt work......
-
I'm updating from my iPhone 4 to the iPhone 5 and have been 'restoring' for 2 hours now and the progress bar still states I hae 6 hours remaining. Will it really take this long? How long should a restore take? It's a 32gb device. Thanks.
I am having this problem. At first with the new iPhone 5, and then with the iPad 2. I am not sure why this is happening.
My gut feeling is this is an iO6 issue and here's why -
The problem mainly occurs with apps. I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them. The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage. It required me to restore the iPad 2 from backup. With this restore the same issues occurred - putting the apps back on the iPad would hang up. The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
My solution has been to soft reset the device, restart Windows, and continue the process until it's complete. This is remarkably inefficient and time-intensive but everything works with patience.
I have been wondering if others have had these same problems. -
Please help i updated my iphone 4 running iOS 4.3.3 to 5.0.1 and couldn't restore the back up of the older version,but I still have the folder of the older back up in AppleComputer,mobilesync please help !! thanks in advance
if you want an intelligent answer, you'll have to provide intelligent information.
WHY couldn't you restore the order backup? Was there an error message? What EXACTLY was the error message? -
HT201210 iPhone 4s cannot be restored after IOS 7.0.2 upgrade
My iPhone 4s prompted me to upgrade to IOS 7.0.2 today. After I initiated the upgrade the phone went to sleep. When I tried to use it, it displayed the "connect to iTunes" message; once connected to iTunes on my iMac, I got messages that it detected an iPhone that needed to be recovered. I tried several times, trying suggested ideas each time -- I upgraded to the latest version of iTunes on my iMac; I pressed both the sleep and home buttons til the apple appeared and then tried to restore -- but none worked. iTunes seems to have lost the name of my iPhone. First time I tried to restore the device list on the left listed its real name but subsequent tries displayed only "iPhone" and I got messages that it couldn't be restored due to an unknown reason with a code 4013.
I'm having the same problem with my iPhone 4, stuck in a boot loop, and each time I try to restore, I get hit with message 3014 when it starts 'Restoring iPhone Firmware".
I have rebooted several times, updated all software, redownloaded the ios file several times over etc, but still phone unable to restore, stuck in the 'connect to itunes' mode. -
i'm using an iPhone 4 after upgrading to iOS 5 i'm getting an error 1635 now i'm facing problems syncing my contacts and facing many problems, i have restored my iPhone but still i'm getting the same error
Did you check your security software settings? eliminating conflicts from third-party security software.
-
Is it still possible to downgrade from ios 6 to ios 5.1.1 on my ipod touch 4th gen as of Sept.24? Also, if I use a backup created AFTER updating to ios 6, when I restore/downgrade to ios 5.1.1, does it become ios 6 again because of the version of ios 6 that I created the backup on?
There has never been a legit way to downgrade.
It will always restore to the latest available software. -
I updated to IOS 8 but my C drive is out of space i couldn't restore my data back; how could move itunes with backup to another drive
or what could i doThere are two solutions . . . I run my iTunes Library off an external hard drive. However, this may limit the portability of your library. Though a La Cie Rugged external would help with that (I love mine, though I use it for diagnostics and repair, not for iTunes--but it does get around).
You can also upgrade your hard drive as was previously suggested. I've bought my recent hardware from: http://www.powerbookmedic.com
They have lots of parts and great manuals!
Good luck!
Sharon -
After updating to ios 6, my iphone 4 screen rotation has stopped working and will still not reset after restoring the iphone completely.
After updating to ios 6, my iphone 4 screen rotation has stopped working and will still not reset after restoring the iphone completely.
-
I wanted to update my iPad 2 from 4.3 to the latest update but I got stuck in the restoring step. I couldn't restore the iPad.
The error message"The iPad cannot be restored at this time because the iPad software update server couldn't be contacted or is temprorily unavailable"Hello someone9,
There are a few possible causes for this issue, sometimes it is related to Security Software, other times it is related to the internet connection. Let's follow the steps below:
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
- Install the latest version of iTunes.
- Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
- Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
- Try to restore from another known-good computer and network.
- If the errors persist on another computer, the device may need service.
If the above does not resolve the issue, you can also check out this article:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814
Thanks,
Matt M. -
HT201210 Unable to activate, backup, update or restore iOS device or iPods using iTunes
Help! I just got an Ipod Touch Generation 3 and am unable to activate, backup, update or restore iOS device or iPods using iTunes.
Read this.
Maybe you are looking for
-
Costing data in Accounting Tab
Hi, When I create a task and have a role assignment, it does calculate the costing based on rates defined but as soon as I assign a resource to the role the cost data goes away. Can anyone help me understand this costing process? It works fine at the
-
Won't come on and when.it's plugged to the computer it wants to restore it and wipe everything out. How do I restore or get it back on without wiping everything out?
-
LOV as parameter for method stuck as read-only, needs to be selectable
Hi, I have a method that calls a stored procedure, and I need to pass in a value selected from an LOV. I build a VO based on a SQL query. I drag in the method as a form. Then convert the input text to an LOV and select the corresponding VO. The form
-
Not Able to create ODBC Connections to AS400 DB2 from OWB 11g
Hi, Currently i am in the process of setting up of database connections to AS400 DB2 Database from Oracle Warehouse Builder 11g. I installed Oracle 11.1.0.6.0 and upgraded to 11.1.0.7.0. I am able to create database links manually but not able to cre
-
Hello. I've got a Macbook, an ADSL router/print manager and a Canon Pixima ip5200. I've installed the driver and the printer works via the USB port. My problem is that I cannot select the correct driver when I try and set it up to work via the router