HT201210 the iPod "ipod" couldnot be restored. the device could not be found.

After updating OS on new Ipod toch 4th gen. Using windows 7 64bit app. the device freezes up amd cannot be restored to earlier settings.

Illass Thanks.
I have already done all you have suggested. After the iTouch froze I had to recover it from another PC running XP. When I then try to connect  to my other PC, running Window 7 64bit, I get error message saying device not recognised. It looks like the driver for the iTouch does not install and the device is not recognised. I have switched off firewalls and AV but still no good.
It is not possible to recovery from PC running Windows 7 64bit or in fact do anything. The itouch does not appear as any device in iTunes nor in explorer.
Any suggestion appreciated.

Similar Messages

  • TS3694 Iphone could not be restored.  Device could not be found

    Iphone could not be restored.  Device could not be found

    Try making sure the iPhone is off, then try the following.
    Hold down the sleep wake button until the Apple logo appears. While still holding down the sleep wake button, also hold down the home button. When the Apple logo disappears release the sleep wake button and continue holding down the home button for an additional 10 seconds. iTunes should recognize it again and restoring may work this time around.

  • HT4097 The Pad "iPad" could not be restored. The device could not found

    I try to update my Ipad IOS in ver6. Every thing was fine but in the last stage after software extraction i am having message "The Pad "iPad" could not be restored. The device could not found"
    Please give me a solution.

    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • HT1414 Mine keeps on saying that the device could not be restored, "an unknown error has occurred (2001)"!! Guess it's stuck in that dreaded "iPhone Recovery Mode" loop. The question is, which way out??? How do I get it out of the recovery loop??

    Mine keeps on saying that the device could not be restored, "an unknown error has occurred (2001)"!! Guess it's stuck in that dreaded "iPhone Recovery Mode" loop. The question is, which way out??? How do I get it out of the recovery loop??

    A quick Google search for Error 2001 would indicate that this occurs when you have a jailbroken phone or were trying to downgrade iOS. Is that true for you?

  • TS1702 I just restored my iPhone from a backup, and 17 apps couldn't be restored because "the app could not be found."  But it's sitting right there in iTunes under Apps.  What's up with that?

    I just restored my iPhone from a backup, and 17 apps couldn't be restored because "the app could not be found."  But they're sitting right there in iTunes under Apps.  What's up with that?

    You haven't told us what you've done to troubleshoot thus far.  What's up with that?

  • The item could not be found? Moved/renamed - TURN OFF?

    So often I get this error message when using the Favorites panel in Adobe Bridge CS4:
    "The item could not be found. It may have been moved or renamed."
    Sometimes it's a misclick, sometimes I forget my external isn't plugged in and am clicking on a folder on an unavailable drive, either way that message pops up then it deletes that entry!
    Is there any way to avoid this? Sure I can readd the item later, but it's a pain to have to remember where it was, and put it back in the favorites (when the drive is reconnected, etc)
    In Mac OS X if you remove the original and have a shortcut/favorite left for it, it doesn't delete it, just puts a question mark - if you should re-insert the drive/folder etc - the ? disappears and your original Shortcut is restored - why doesn't Bridge operate like that? I'm constantly re-adding things to the Favorites panel, why?
    If there isn't a way to avoid it, I'll repost in Feature Requests.. Thanks!

    Hi Ramon-
    I get that same message all the time and the folders in my favorites are always the same and on my internal HDD... yet every time I reopen Bridge and click any favorite, I get this message.
    I wind up using Favorites as a one time use only feature... but even then, it's a PITA since I have to delete all the "moved" ones the next time I open Bridge.
    I thought this was a pref issue and have deleted plist files and recreated them but that hasn't helped.
    any ideas?
    running imac 10.6.1 and mbp 10.6.1 and CS4 (updated)
    thanks,
    tom

  • The factory profile for the display could not be found.

    Whenever I try to color calibrate my Mid 2010 iMac I get the error message "The factory profile for the display could not be found". When you look at the profile settings for the display a color sync profile is set, but the setting for the factory profile is blank. I know where the color sync profiles are stored but it seems to me that the display has lost the setting to the factory profile. Can anyone tell me what the default factory profile setting should be? and how do you restore the setting? (note: I seem to have all the ICC files, it's the default factory setting itself that is missing)

    There seems to be a lot of posts about this issue dotted around the net with no-one able to come up with a solution. So I found a solution myself! =P
    1) Download a copy of Plistedit Pro. It's shareware, so donate!
    2) Edit /Library/Preferences/.GlobalPreferences.plist (you will need to create a copy of the file, edit the copy and then copy back)
    Using the plist editor find the coloursync entry for your device and simply edit the factory default entry to point to a valid colorsync profile file (.icc).
    I can now colour calibrate my iMac again. Phew!!!

  • When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box

    When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

    When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

  • Crystal report error (The table '' could not be found)

    Dear Expert,
    As I know, the end user who don't want to edit the crystal report design no need to buy crystal report,right?
    Using the 'Crystal reports for SAP B1', they already view the report.
    But, how about, if I had created one crystal report, and then I want to distribute to end user. When I load the report on user machine that dont have crystal report, the system shown an error (The table '' could not be found).
    I think, maybe because of the database location. When I create the report, of course I made connection to my machine as a source of database location. But, how i'm going to change the database location to user machine?
    Is it when we login into SAP, did SAP auto detect the new location source? And will auto create connection to the crystal report?
    Thanks in advance for any help.

    Hi ,
    We do not create the database connection for the end user. the end user must have the same database connection as it is set up on your machine. The report is looking for the same connection, with the same access into the database.
    Best regards,
    Jadie

  • A webpart or web form control on this page cannot be displayed or imported.The type could not be found or it is not registered as safe.

    Hi,
    After moving my files from SP 2010 to SP 2013 , for all my web parts i am getting A webpart or web form control on this page cannot be displayed or imported.The type could not be found or it is not registered as safe. error. I checked web.config files
    and they are there as safe control and trust level is also full. 
    These webparts work in 2010.
    Do i need to tweak something in code or distributed cache to make this thing work? The errors i see are
    Error importing WebPart. Assembly  c , Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29, TypeName. C. A Web Part or Web Form Control on this Page cannot be displayed or imported. The type c Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29
    could not be found or it is not registered as safe.
    Getting Error Message for Exception Microsoft.SharePoint.ApplicationRuntime.SafeControls+UnsafeControlException: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type C Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29
    could not be found or it is not registered as safe.    
     at Microsoft.SharePoint.WebPartPages.WebPartImporter.CreateWebPart(Boolean clearConnections)    
     at Microsoft.SharePoint.WebPartPages.WebPartImporter.Import(SPWebPartManager manager, XmlReader reader, Boolean clearConnections, Uri webPartPageUri, SPWeb spWeb)    
     at Microsoft.SharePoint.WebPartPages.WebPartGalleryItemBase.InstantiateFromXml(XmlReader reader)    
     at Microsoft.SharePoint.WebPartPages.WebPartAdder.SiteWebPartGalleryProvider.SiteWebPartGalleryItem.Instantiate()    
     at Microsoft.SharePoint.WebPartPages.WebPartGallerySourceBase.AddItemToPage(WebPartZoneBase zone, Int32 zoneIndex, WebPartGalleryItem item, String wpid)    
     at Microsoft.SharePoint.WebPartPages.WebPartAdder.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
    An error occurred while attempting to add the gallery item [Custom] c to the page. The error was: Microsoft.SharePoint.ApplicationRuntime.SafeControls+UnsafeControlException: A Web Part or Web Form Control on this Page cannot be displayed or imported. The
    type c Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29 could not be found or it is not registered as safe.    
     at Microsoft.SharePoint.WebPartPages.WebPartImporter.CreateWebPart(Boolean clearConnections)    
     at Microsoft.SharePoint.WebPartPages.WebPartImporter.Import(SPWebPartManager manager, XmlReader reader, Boolean clearConnections, Uri webPartPageUri, SPWeb spWeb)    
     at Microsoft.SharePoint.WebPartPages.WebPartGalleryItemBase.InstantiateFromXml(XmlReader reader)    
     at Microsoft.SharePoint.WebPartPages.WebPartAdder.SiteWebPartGalleryProvider.SiteWebPartGalleryItem.Instantiate()    
     at Microsoft.SharePoint.WebPartPages.WebPartGallerySourceBase.AddItemToPage(WebPartZoneBase zone, Int32 zoneIndex, WebPartGalleryItem item, String wpid)    
    Adit

    Hi Adit,
    According to your description, my understanding is that the error occurred when you deployed the .wsp files to SharePoint 2013.
    I recommend to check if all the assemblies are put into the BIN and GAC.
    If above cannot work, you can check the troubleshooting steps in the link below:
    http://www.bluedoglimited.com/SharePointThoughts/Lists/Posts/Post.aspx?ID=189
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Error message on boot up: The file could not start C:\Windows\SysWOW64\vidperf.dll. The path could not be found?

    C:\Windows\SysWOW64\vidperf.dll  The path could not be found? What does this mean? How do I re-install this packet and eliminate this error message?
    Dell Laptop inspiron 1525 with Windows 7 Premium with open rights.

    P
    Just to eliminate the possibility please run Malwarebytes
    Please download the free version of Malwarebytes.
    Update it immediately.
    Do a full system scan
    Let us know the results at the end.
    http://www.malwarebytes.org/products
    Wanikiya and Dyami--Team Zigzag

  • I paid for and downloaded a song, but it won't play saying the file could not be found. It says this even when I click on the song IN the itunes store, so I can't even listen to the sample now??

    I paid for and downloaded a song, but it won't play saying the file could not be found. It says this even when I click on the song IN the itunes store, so I can't even listen to the sample now??
    I haven't kept records of the songs I have paid for, and a number of songs have recently been displaying this message, making me search my computer for them. Most I have been able to find, but this one immediately "disappeared" the moment I attempted to play it after downloading...... how do I either get it back or get my money back???

    How did you do this move?  Unless you know what you are doing you have to move the whole, complete iTunes folder.
    iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Quick answer if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
    Windows users see tip at: https://discussions.apple.com/message/18879381

  • Yahoo mail starts to open an email (I can see the content) but then a message comes up saying "Whoops! The page could not be found. Try giving it another chanc"

    When i am in Yahoo mail and am opening on an email to open, the email starts to open (I can see the content of the email for a second) and then I get a screen with a message that states 'Whoops! The page could not be found. Try giving it another chance below'. But the email had been there so I don't understand that is happening. This just stated happening about a week or two ago. There is a search bar in the center of the screen and at the bottom of the error page is the following.
    Contact us | Why did I get this page?
    © 2012 Conduit

    Make sure that you access the Yahoo mail page via the Yahoo home page and not via a bookmarked link to a specific page.<br />
    The latter may include POST or GET data that is no longer valid.
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    You can also check for issues caused by extensions.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Could not complete the export command because the file could not be found

    When I try to save for web, Photoshop pops up a dialog box that says "could not complete the export command because the file could not be found".
    What is the solution for this?

    Please provide more information (Photoshop version, OS, target volume, …).
    Does the file’s or one of the folders’ name contain problematic letters (slash etc.)?
    Boilerplate-text:
    Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

  • Could not save as (file name) because the file could not be found

    When i try saving sothing it comes up with could not save as (file name) because the file could not be found and need to save this file. i could save stuff before but not anymore if anyone could help i would be grateful
    im using photoshop cs5.1
    Thanks keiron

    We cannot know. These kinds of things are operating system errors with stuff getting blocked due to insufficient permissions, security tools interfering, network errors or whatever. Since you mentioned none of that, it's an "Ask your mom..." thing at this point, but if you provide more details, someone might be able to figure it out.
    Mylenium

Maybe you are looking for

  • MapViewer in JDeveloper10g

    Hi, I'm try to install the mapviewer bean on JDeveloper10g, so when I start the JDeveloper10g application I get this message D:\JDeveloper10g\jdev\lib\ext\mvpalette.jar!\META-INF\jdev-ext.xml Error: <Line 14, Column 21>: XML-24534: (Error) Unexpected

  • Envelope index deleted - Rebuild fails....

    Hi, I have a a complete crash, and successfully restored thanks to Time Machine. As you know, TM does not backup the envelope index file, so i have to go through the import process. However, the process constantly hangs, right from the start, without

  • Support of marketplace versus store

    My management considers submitting our products as candidate for either * "Azure marketplace" (independent application) * Or "Addon store"  (if we warp it as addon) Will we experience a different in the tooling and support Microsoft provides, for tho

  • Make file names show in full with line breaks. How?

    I use column view in Finder. When file names are long, they're truncated in the middle, with dots. If I have several, similar file names, it's a pita to find right file. Either, I have to expand the column, or click the file to see the full name, or

  • Disadvantages of excessive indexes

    Guys, I am writing a paper that outlines disadvantages excessive use of indexes or other indexes. I found these points. Do you think i've missed any ? Indexes consume disk space Excessive use of indexes can pay serious performance penalty And Queries