HT201210 this was not helpful, my iphone will not update or restore and my itunes will no longer reconize it, what should I do?
this was not helpful, my iphone will not update or restore and my itunes will no longer reconize it, what should I do?
iOS device not recognized in Windows
Similar Messages
-
when i plug in my iphone to the system, itunes does not recognize my iphone. i have tried all the troubleshooting part n there are no results yet. what should i do?
I have reset my iphone and made sure all updates have been done on my macbook pro and iphone. It was after updating my macpro that I plugged in my phone and went to itunes to backup phone and can't see the device anywhere! I have also done all the troubleshooting that apple.com recommended too...all except re-installing itunes!
-
my computer keeps saying that itunes is not working so i updated my windows and reinstalled itunes but it still doesnt work what do i do?
This link will give service options for your Country ,select from drop down menu
http://support.apple.com/kb/index?page=servicefaq&geo=United_Kingdom&product=iph one
To troubleshhoot restore see document below
http://support.apple.com/kb/HT1808 -
I updated my iPhone5 to iOS7 and now iTunes will not open. What do I need to do?
https://discussions.apple.com/message/23167278#23167278
-
my iphone 4 was working fine yesterday and last night it just started cutting off and on by its self and now it doesnt want to come on at all. what should i do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem. Take it apart and verify that you reassembled it correctly. Next take it to someone with more experience. -
MMy iphone 5 switch off and on,an apple logo appears and although it is not on last stage of battery..I have replaced my iPhone 4 times but I am getting some issues again and again..now I have few days left in my warranty..AppStorecrashes sometime and safari mostly going to be hang...ttell me the proper solution what should I do...??
also call drop issue..Is your battery dead or alive?
If the battery is dead, we must find out if it is:
1. Charger problem
2. Cable problem
3. Docking port problem
4. Wall socket problem -
What should I do? Will I lose all my music?
Once you are in Recovery Mode, it's too late to do any backup. I am afraid you are going to lose your data.
-
My iPhone has been acting up ever since I upgraded to the new software. Normally it will take a bit longer to charge, but I got used to it and was sort of glad that I was not being so dependent on my phone, but 17 hours is just ridiculous. Funny enough, I heard it go off continuously over night (I want to say aronud 4 am) and then when I woke up to check it, it said the battery was dead again! It was never unplugged, never touched, unless I have a ghost in my house or something. A hard reset is not working, is my iPhone 4 just completely dead?
I think if it were me, I'd be sure to go through all of the stuff in this article
http://support.apple.com/kb/TS2802
and if that didn't work, set up a Genius Bar appointment. Battery replacement for a nominal cost is also a possibility
http://www.apple.com/batteries/replacements.html
though I think I'd try the Genius Bar first. -
when i turned on my i pod a white apple logo was shown which then turned to rainbow colours and the i pod started buffering, this is all it does, i cannot get it to stop and my computer will not talk to the i pod, help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I updated my IOS on my iPhone 4S and it locked up. I had to restore my phone and now iTunes will not go past the setup your phone screen even though the phone as been restored. How do I get iTunes to go past this screen so I can sync my phone again?
Depending on what iPhone you have when you get to the connect to wifi you should be able to activate your device over cellular data. Try doing a hard reset by holding the home circle button an power button until an apple pops up and the go through the setup again and when you get to the wifi part a option should be setup with cellular data iPhone 4 and above should give this option sometimes doesn't like showing up that's why u have to do a hard reset first
-
I thought I was installing an update and now iTunes will not open on my computer... HELP!!!!
Others are more likely to help if you stop needlessly repeating yourself and provide some details.
What operating system? Windows (XP, Vista, 7) Mac
Any errors?
Also, try doing a search either here or via Google, you are more likely to get a faster resolution as there is no need to wait on others to respond. -
Suddenly my LR 5 will not recognize my iPhone, which I updated to OS 8. I need my pictures NOW - help!
I just drove 4 hours to the nearest Apple store, the same on that replaced the battery 3 months ago. They tried to fix it, but could not and then admitted they probably did something when they replaced the battery. So with the manger's approval they replaced my phone at no charge to me, even thought I bought the phone back in 2012.
-
I didn't have a signal so I restored my iphone 4s but this always comes up "Your iPhone could not be activated because the activation server is temporarily unavailable" HELP PLS!
Try this link for activation problems ...
http://support.apple.com/kb/ts3424
If you had iOS 7 BETA installed, just go to developer.apple.com and log in using your developer account. There are discussions about this issue. Otherwise... for non-developers, I'm afraid you're on your on. Use Google. -
I have an old i phone 3G and do not know the password for it. trying to restore it from itunes so my daughter can use it as an ipod but keep getting error code 1015, any help on how to get passed this please?
Hi ratcat14!
I have an article that can help you troubleshoot this issue:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden -
I just switched iphones but my app store and my itunes will not work but i can make calls and texts
i just switched iphones but my app store and my itunes will not work but i can make calls and texts
Hi there. How were you able to solve it? I have a one year subscription to EW and I was able to receive a couple of issues. But now, I cannot download the new issue anymore. Please help.
Thanks.
Maybe you are looking for
-
Need some assistance with multiple problems (8330 Curve)
Hello all, I am recent buyer of an 8330 (Verizon). I like it a lot and find it a very useful tool. Being new to the BB world, I do have some questions, that I cannot find answered on any of the BB forums. So here they are: 1. I have two e-mail accoun
-
Hi, Iam trying to build a scenario like this. WMQSeries->XI 3.0->SAP R/3--->WMQSeries. Can someone please tell me whether my approach is right or wrong.And the steps iam missing.WMQ>XIBPM>R/3>XIBPM>WMQ. Totally created 5 interfaces. MQ Request -->Ref
-
Airport Extreme and Printing : is there a solution
HI all, I have gone through many topics on printing with airport extreme and I have seen a lot of people like me having the same problem : the printer plugged to the usb port of the Airport Extreme is visible but can not print. People tried to change
-
How to create a rhel 4 user to compile forms and reports from windows pc?
Friends, We have Oracle Application Server 10gR2 on RHEL 4.8 Developer's PC - Windows XP SP2 Now my requirement is.... i have to create a user so that they can able to login thru putty from their windows xp pc. they can able to copy/delete the file t
-
How can I compare strings with JSTL? One string is a stored date and the other is a generated date. My goal is to set the correct date in a dropdown menu with date values (yyyy-MM-dd) by comparing the current date with the stored. Code <% Calendar ca