HT201210 tried updating my iphone 4 to ios6, stopped and completely shut my phone down tells me that i have to plug into itunes and restore to factory settings but will not let me do this????

tried updating to ios 6 on iphone 4 has completely shut my phone off tells me i have to plug into itunes and restore to factory settings but will not let me do this?? need help???

Interceptor94 wrote:
  What should I do short of restoring my phone to factory settings?
Nothing.  The message means you MUST restore your phone to factory settings.  There's no way around this .  Your phone is in recovery mode.  That's the only way to get it out.

Similar Messages

  • Had an iPhone 4 updating the OS when it was interrupted by the computer going to sleep and now is frozen on "plug into iTunes" screen.  Home/Power button combo will not reset, iTunes does not acknowledge the phone is plugged in.

    I recently upgraded to the 5s, so I delegated my old iPhone 4 to a music player/daughter checking instagram and email.  Three days ago I plugged the iPhone 4 into iTunes to update it, the OS began updating.  During the update my computer went into sleep mode, interrupting the OS update.  Now the phone will not do anything but show the screen with the graphic indicating to plug the phone into iTunes.  I've tried a hard reset (holding down power button/home button), plugging the phone into iTunes before/during holding down the home button, holding down the buttons for various lengths of time in various permutations according to info I've found online, etc, and nothing happens beyond a brief showing of the Apple logo and then back to the same screen.  iTunes will make a connection noise when the phone is plugged in but otherwise makes no indication that a device is plugged in (no iPhone button in the tool bar, etc.).  Any ideas or do I need to take it to an actual Apple store and hope they don't tell me it is completely bricked?

    Yep, done all that.  Repeatly.  Don't get any sort of recovery mode message or the phone showing up on iTunes at all.  iTunes is most current version, all diagnostics show everything fine, and it works fine with my current phone.  Just....nothing.

  • BF tried to update to ios6 on iphone 4 but crashed half way through saying it needed to plugged into iTunes and then restored so after it was 'restoring' he had an error message come up say to couldn't be restored....what should be do next?

    BF tried to update to ios6 on iphone 4 but crashed half way through saying it needed to plugged into iTunes and then restored so after it was 'restoring' he had an error message come up say to couldn't be restored....what should be do next as the phone is in a complete non working condition

    Spent hours trying everything suggested and finally this morning hit on a solution. iTunes must be run as an administrator. Even though you are logged into your PC as an administrator, using the iTunes shortcut does not make you an administrator in iTunes. I found this out by using the diagnostics in iTunes and reading through the results report.
    I am using Windows 7, so I clicked the start button and right clicked on iTunes and selected "Run as an adimistrator". The first restore attempt got the 4013 error. I then did the DFU thing, hold power and home buttons for 10 seconds, release power and continue holding home for 10 more seconds.
    iTunes gave me the restore message and I clicked it. I clicked the restore iPhone button and it started. The drivers loaded a couple of times. I got the apple logo with the progress bar and this time instead of disappearing, it started to fill in.
    End result, a successful restore to factory settings and a happy 14 year old.
    Hope this helps others.

  • I have songs on my iPhone 6 that I can't remove and when I plug into iTunes and go to "Summary" and "On This Device" the songs don't show up but they are on my phone. How do I remove them? Not even sure how they got on actually.

    I have songs on my iPhone 6 that I can't remove and when I plug into iTunes and go to "Summary" and "On This Device" the songs don't show up but they are on my phone. How do I remove them? Not even sure how they got on actually since I have a iTouch and keep all my music there. HELP!!

    Have you tried deleting the songs from Settings?
    Settings -> General -> Usage -> Manage Storage (not the iCloud link!) -> Music and then click Edit to enable you to be able to delete.

  • HT4528 hi, my iPhone is already completely updated and I want my iMessages to go to my phone number, however my phone number shows up on the settings screen for that, but will not let me select it to be used. How do I fix that?

    hi, my iPhone is already completely updated and I want my iMessages to go to my phone number, however my phone number shows up on the settings screen for that, but will not let me select it to be used. How do I fix that?

    Thanks to all who responded. You are all absolutely correct. However, this Ipad was a gift to my wife who was dying of cancer in the hospital and wanted some entertainment. So I started it out with her Apple ID. After she passed away I moved from Sacramento to Austin and eventually proceeded to get the Apple ID changed from my wife's to mine. Meanwhile when she was in the hospital I opened an Itunes account in my name to buy movies for her. That was the first mistake.
    Then during the move to Austin I lost track of the IPAD and later found it and tried to use support but could not remember the proper ID. Later the folks at the Apple store helped me create a new and novel Apple ID that was unfortunately unlike any other.
    The botom line is that I am stuck with three Apple IDs and three passwords. I am told by Apple there is nothing they can do about this as IDs cannot be changed or destroyed. I can quit using them or start a new account but when I try to do that the system keeps remembering too many things from the past and resists.
    Even if I sold this Ipad and bought a new one, the system memory is still there.
    I think the real problem is that destop and laptop computers are totally owned by an individual and that individual can control logins and passwords to his liking. IPADs and similar Apple products are different in that the corporation has built in their own intrusion detection schemes because of the relation to Itunes.
    One thing I thought about is to open a new Itunes account pretendding to be a new customer with my regular Apple ID. Perhaps I could do the same with Apple Support.
    Thanks for your comments.
    RAZ

  • Hello im trying to unlock my ipod and its not letting me do this its saying that i have to connect to itunes and i did that so is there anyway you could help me please?

    hello im trying to unlock my ipod and its not letting me do this its saying that i have to connect to itunes and i did that so is there anyway you could help me please?

    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    Please Get the iPod Touch User Manual for iOS 5

  • Iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?

    iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?

    Apple, as I said, does not repair your iPhone. All hardware service issues are handled by replacing the unit. So they can't handle the home-button issue without also addressing the issue of the cracked screen, for which they'll almost certainly charge you. But you can make an appointment at an Apple Store or call Apple tech support and plead your case.
    Regards.

  • My iPhone4 is showing no service so i power down but when i power back up it says to plug into itunes and restore, i had this same issue with another iPhone and apple replaced it but its doing the same thing on this phone any help would be apprecaited

    my iPhone4 is showing no service so i power down but when i power back up it says to plug into itunes and restore, i had this same issue with another iPhone and apple replaced it but its doing the same thing on this phone any help would be apprecaited

    AAAAAANNNNNNDDDDDDD go figure no one can help!!!!! i just dont know what to do, i guess no-one else does either lol!!!! thanks anyway!!!!!

  • I tried to update my ipod4 but now all it shows is that i need to plug into itunes on a computer

    I tried to update my ipod4 but now all it shows is that i need to plug into itunes on a computer

    Connect the iPod to your computer and restore via iTunes
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.

  • I have a restriction passcode that I have no idea what the passcode could be. I know that I need to reset the phone to factory settings but how do go about doing this without losing all of my contacts and other info, etc? (mainly contacts)

         At some point, I don't even remember doing this it must have been so long ago, I set a restrictions passcode on my phone. This has become a problem now because I have so many apps that I do not ever use that take up so much space I can no longer take pictures or put more music on the device. I have read that I need to restore to factory settings but that once I do that I cannot restore to a backup because restrictions passcodes are saved in backups. Is there any way for me to restore my phone to factory settings and then get all of my contacts and perhaps as much other data back as I can? I have tried every passcode I can think of for the restrictions passcode (24 times! to the point that ever time I try and fail I cannot try again for an hour. To say the least, this is quite frustrating as is limits what i can do with my phone on a daily basis, whether it be music or taking pictures and videos etc. Can someone please help me solve this problem without losing minimal data? I have already backed the phone up to my computer as well as iCloud. Even the woman at the apple store told me I had to restore it to factory but was too busy to get further into it and I didn't have a genius bar appointment. If all else fails I can make an appointment and go in there. I just thought I may as well ask on here first to see if there was a way I could do it myself. Thanks for reading and hope you can help me!
    -Mike

    You can't. Restoring new means everything is erased. If you have a backup made before creating a restriction code, then you can restore that backup, but none later.
    Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • So my daughter set a password to lock her ipod and now she can't remember it.  I tried to restore to factory settings but it still wants a password.  I tried 0000 and that doesn't work.  Any ideas what to do to?

    So my daughter set a password to lock her ipod touch and now she can't remember it.  I tried to restore to factory settings but it is still asking for a password.  I tried 0000 and that didn't work  Any ideas what to do?

    From this Apple support document: iTunes: Specific update-and-restore error messages and advanced troubleshooting
    This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
    Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect.  For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the headingBlocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
    Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
    B-rock

  • Please help block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Please help!

    please helpme i block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this  should unlock with key and I should do for Please help!. thanks

    Place the iPOd in recovery mode and then restore. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • Hi. I just got the iPhone 6, plugged into itunes and made the mistake of putting an OLD back up on my new phone resulting in losing all contacts after 2013. They are not saved on the cloud. Is there any way to go back to before I screwed up?

    Hi. I just got the iPhone 6, plugged into itunes and made the mistake of putting an OLD back up on my new phone resulting in losing all contacts after 2013. They are not saved on the cloud. Is there any way to go back to before I screwed up?

    If you have performed a sync with the device since you restored this old backup, then don't bother looking for another backup. iTunes writes over the last backup each time you sync. If you were handling contacts in iCloud, you would find them by logging into iCloud. Or you can check settings and iCloud and see if the button it on for Contacts. Otherwise it might have been on the computer, if you had a program that syncs with iTunes and handles contacts, depending on the computer system you use. If Windows, it would be Windows Contacts or Outlook. If a Mac, there is a Mac Address book as well.

  • Easiest way to transfer contacts/data from old phone (5) to new (6 and 6 ). I did "back up to this computer" for both phones. After activation (verizon) do I just plug into iTunes? One phone is still using iOS7 (is that a problem?, other is iOS 8.1.

    What is the best/safest way to transfer contacts/data from old phones (5) to new (6 and 6 ). I did "back up to this computer" for both phones. After activation (verizon) do I just plug into iTunes? One of the old phones is still using iOS 7, will that be a problem?  (the other has iOS 8.1).

    The following has instructions on how to transfer to a new iPhone using either iCloud or iTunes: Transfer content from an iPhone, iPad, or iPod touch to a new device - Apple Support

  • My Iphone 4 3g will play songs through itunes but will not let me drag my itunes content to it what should I do

    My Iphone 4 3g will play my songs through itunes from my phnone but will not let me drag my itunes content to my phone. what do I have to do

    iPhone was hacked/jailbroken and through updating iPhone, it is locked back to the original carrier. Give your iPhone back, it is useless for you.

Maybe you are looking for

  • SPACES: Can I have same program, different docs in different Spaces?

    I'd like to have one OmniOutliner document open in Space #1, and a different OmniOutliner document open in Space #2. But I haven't yet figured out how to do this. Is there a way for me to have two different documents from the same program open in two

  • [Error running JSP portlet in JDeveloper

    I'm writing a JSP portlet with JDeveloper 9.0.3. The "index.jsp" works OK, and I can see the registration URL for my new provider. I deploy the application to Oracle9iAS 9.0.2.0.1 Application Server succesfully throught DCM servlet, register the new

  • Unable to Create PLSQL Webservice in JDeveloper 11g

    Hi, i have created webservice for PL/SQL for functions with out TYPE data types as parameter.. but i am unable to create a webservice for procedure having Freight_Pkg.PROCEDURE get_freight( p_sbl_source_line_tab IN OUT SYK_SBL_SOURCE_LINE_TAB_TYPE ,l

  • Connecting via ethernet?

    I am in a hurry to connect my IBook G4 to my wife's G3 desktop in order to allow her to take my IBook to the States from the UK for a prolonged stay. What's the best way to transfer all my data including in Applications ( incl Word)

  • How to refer rectangle box in my program?

    I have to do some code migration from 16 bit Apps (Forms on Win3.1) to 32 bit apps(Forms on WinNT).For this migration i made a form for generation all the form in one shot . it's working fine. but it's giving me scroll bar in each form. we used recta