HT201210 TRIED UPGRADING OLD IPHONE FROM SOFTWARE 3.0 BUT NOW ONLY SHOWING SLIDE FOR EMERGENCY.HELP

tried upgrading iphone 16gb from software 3.0 but now only showing slide for emergency.help

Connect in recovery mode, explained in this article: iPhone and iPod touch: Unable to restore , then choose "restore" when you right click on your device in the device list and set it up "as new device" How to set up your iPhone or iPod touch as a new device

Similar Messages

How do i get backed up purchases from an old iphone to a new one, but the only problem is an ipod is backed up into the new phone and i cant get my iphone data on to the new phone because its under i pod

how do i get backed up purchases from an old iphone to a new one, but the only problem is an ipod is backed up into the new phone and i cant get my iphone data on to the new phone because its under i pod?

Thanks very much!
Although I had to add everything again to the playlist, at least I can just copy it over in future!

I just upgraded my iPhone 4s to iOS 6 but now it isn't compatible with my itunes 10.6 please help?

I just upgraded my iPhone 4s to iOS 6 but now it isn't compatible with my itunes 10.6. I have tried to download itunes 10.7 however my macbook is only 10.5.8 so I can't. So now I can't connect my iPhone to my itunes, what should I do?

Hi guyz just fixed mine just now, I used an app named iREB please refer to the below link. Make sure youre iphone is plugged in to your USB then launch the app as admin. As soon as the app is running go to the "Recovery Mode Loop Fixer" tab & hit the "Set Auto-Boot True (Fixes 1015 errors / Recovery Loops). It will restart your iPhone in just a moment & get you back to your homescreen.
I hope this will help those whos undergoing this horrifying iPhone problem.
Just additional info.
Issue: Stucked with USB & Itunes Logo during upgrade attempt to iOS 6.0
Iphone 4S (iOS 5.1.1.(9B206)
32 GB
Official Factory Unlock
PC-Win 7 Home Premium 64bit
iREB Download Link:
http://www.yourtechinfo.com/2012/05/how-to-fix-recovery-mode-loop-or-itunes.html #Downloads:

Brand new iPhone 3GS 32GB, put sim card in, turned on, Slide for Emergency.

I just bought an iPhone 3GS with 32GB black, I used the pin to eject the sim card socket, and put the sim card in.then i pressed the silver power button at the top right corner for 3 seconds, it turned on with the gray apple. Then it comes to "Slide for emergency" with this itunes icon.
Now what do I do?

Ok seems to work. Thanks very much. Connecting to iTunes solved the problem. I presume I was one of the few cases where the iPhone didn't work without being hooked up to a computer first.
(I had read reports about this happening to people after they had upgraded, or 'jailbroke' their phone, but since I had done neither of these things, I was worried)
All iPhones have to be activated through iTunes. Usually it is done at the store when you buy it.

HT4059 I used to be able to transfer PDFs from Dropbox to iBooks but now the file appears for about 1 second and then disappears - any ideas?

Can anyone help? I want to transfer PDF files from Dropbox to iBooks but when I do, the file appears for about 1 second then disappears. I used to Beatle to do this with no problems, but now it doesn't work. Help!

I had the same problem. After numerous attemps to Restore from Itunes, I decided to use the "Setup as New Ipad" option. It went through a few question on new setups. Afterwards all my apps, data, photo's were still intact. Which shows that the Restore from Itunes worked. There must be a small bug that prevents the Ipad to open after "Restore from Itunes" . Hope it will help you.

I upgraded my iPhone 4, have AT &T but now can't make or receive calls.Please help.

I upgraded my iphone 4 but now cannot make or receive calls. I have AT&T. Please help!

What did AT&T say when you contacted them?

Setting up 5c 16gb by restoring from 4s 4gb, and 5c now only shows 4gb of storage. How do I get 5c back to 16gb?

i bought my wife a new IPhone 5c 16gb. On setup, I chose to restore from backup that was made from IPhone 4s, and now her 5c only shows 4gb.
how do I get back to 16gb?

If it is a 16GB it will remain that way, the only thing that changes is how much storage is being used or is available. Where are you exactly seeing this?

I am trying to send data from textfield to database but it is showing error "ORA-12899: value too large for column "HR"."DOCTORS"."NAME" (actual: 658, maximum: 20)"

Although i am entering only one character into the textfield then too it is reflecting the same error.
private void initEvents()
okButton.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
Connection conn = null;
    Statement stmt = null;
    try{
       //STEP 2: Register JDBC driver
       Class.forName("oracle.jdbc.driver.OracleDriver");
       //STEP 3: Open a connection
       System.out.println("Connecting to database...");
       conn = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:xe","hr","hr");
       //STEP 4: Execute a query
       System.out.println("Creating statement...");
       stmt = conn.createStatement();
       System.out.println(txtField);
       String sql = "INSERT INTO DOCTORS VALUES ('"+txtField+"','"+textField_1+"','"+textField_1+"','"+textField_2+"','"+textField_3+"')";
       JOptionPane.showMessageDialog(null,"Inserted Successfully!");
       ResultSet rs = stmt.executeQuery(sql);
       rs.close();
       stmt.close();
       conn.close();
    }catch(SQLException se){
       //Handle errors for JDBC
       se.printStackTrace();
    }catch(Exception e1){
       //Handle errors for Class.forName
       e1.printStackTrace();
    }finally{
       //finally block used to close resources
       try{
          if(stmt!=null)
             stmt.close();
       }catch(SQLException se2){
       }// nothing we can do
       try{
          if(conn!=null)
             conn.close();
       }catch(SQLException se){
          se.printStackTrace();
       }//end finally try
    }//end try

What is a the size of the text you are trying to insert?
Have you tried the increasing the size of 'Name' column to 658?
Most likely the size of Name column is 20. This isn't enough to fit in the value you are trying to insert.
You can increase the size of the Name column with alter table Hr.doctors modify ( Name column_type (658));
Let me know if this helps.
Regards,
Suntrupth

I just tried to buy Flowpaper from the app store but now my screen seems fr

I confirmed my credit card and billing details now I have a black shadow over the centre of the screen where the billing info panel was. and nothing seems to be happening.
I have only bought this iPad last week it is an original one refurbished
16 gb with wifi, not 3g.
Also Although I had set up a new password yesterday and KNOW I was using the correct one for my apple ID I had to set up another one.
Why did it not recognise my password in iTunes. surely it is the same password for my apple .com support login as for iTunes.
Can anyone help please
I need my iPad as it is my voice( I write on it as it is easier to read my typed messages than my scribble if I am writing quickly.
Thanks

Well I dont how but it seemed to have cleared and I then had to go back tohet app and 'buy' it again and it downloaded.
I love it too. worth the .59p
Thank you for taking the time to reply

HT201210 I updated my iPhone 4 to IOS 6, but now phone is in "recovery mode" and won't start?

I plugged into iTunes but it wants me to restore my phone. I didn't back up the phone (duh, I know) and I don't want to lose my info. Is there anything I can do?

i am having the same issue. after spending 40 mins on the phone with apple support yesterday (she was very nice and one of the best tech calls i have made over the years) it could come down to the fact i was using a third party cable,will go and buy an apple one and see if that helps. if it does ill let you know.

Tried to upgrade my iPhone 4 to 5.1 and now it is stuck in "plug into itunes mode" after trying to update to iOs 5.1 and receiving error (1).

Tried to upgrade my iPhone 4 to 5.1 and now it is stuck in "plug into itunes mode" but will not recover when I plug it in. It is coming up as "unkown error (1)". Is there anything I can do?
Also, is there any way to recover pictures I have not yet backed up? They should be on iTunes, but do not show up when I plug the phone in or otherwise.
Is there any hope in saving this phone or is my best bet contacting Verizon or Apple to overnight me a new one?

From iPhoneWiki:
Try changing the USB port (the back one of chassis is better) and restart computer.
The installed version of iTunes may also be too old. Update iTunes.
Also put your iPhone in DFU mode when doing the above and restore. It's a software error.

After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working!

After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working? Can it be recovered or a Hardware has to be replaced. I tried restoring my phone, but it did not work. Any solutions?

alisportshots wrote:
I have a similar problem, but after following your suggestion of deleting my iphone backup and then turning backup back on again, I needed to plug my phone into my computer to sync the backup. I re-tried to do an icloud backup and it again told me that "the last backup could not be completed"... since I had deleted the backup, it says the "Last backup: never". Ugh. I reconnected my iPhone 4S to my computer and iTunes so I could sync my phone and do a backup... it's still "waiting for sync to start"...
For your iCloud backup, you may have an app that is preventing the backup from succeeding. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.
If you turned iCloud backup off and try to sync to create a backup on your computer and got a "waiting for sync to start" error, it may be caused by a corrupt backup on your computer. You could try deleting your last backup by opeing iTunes and going to Preferences>Devices, clicking on your last backup and clicking Delete Backup. Then try again.

I'm trying to import photos from my iphoto library, but keep getting a message saying I cant import from 7.1.5, that I need to upgrade to 7.1.5 or later. But I have version 8.1.2. I don't know what to do. I've been able to import in the past.

I'm trying to import photos from my iphoto library, but keep getting a message saying I cant import from 7.1.5, that I need to upgrade to 7.1.5 or later. But I have version 8.1.2. I don't know what to do. I've been able to import in the past.

Sounds like an issue with the iPhoto Library
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

TS3899 I upgraded my iphone 4 to ios 6 and now I can't get my work e-mail anymore. I've tried deleting the account and re-adding, per other forum suggestions, and still no luck. Also, there is no longer an "Advanced" section to enter information.

Help! I upgraded my iphone 4 to ios 6 and now one of my two emai accounts - my work account - no longer receives/sends emails. I checked my e-mail settings and they were correct. I then deleted the account and tried to re-add it, per discussions in other forums, and it won't verify the account. In addi tion, there was previously an Advanced section in the e-mail account setting, and now there isn't - don't know if that is part of the probem and the phone needs additional information that it's not asking for anymore . . . I'm beyond frustated. Many hours of lost productivity. Any suggestions? Can I got back to the previous version? I was thinking of buying new phone in next few months, but if this is resolved I'm leaving Apple.

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

How do I remove my old iPhone from "Find My iPhone"?

How do I remove my old iPhone from the device list?

From the Help files in the app . . .
Remove Device
If you’re no longer using an iPhone, iPad, or iPod touch that was set up to use Find My iPhone, you can remove it from Find My iPhone when the device is offline (turned off or not connected to a data network, such as EDGE, 3G, or Wi-Fi). To remove the device, you need to sign in to me.com on a computer.
To remove your device from Find My iPhone:
On a computer, sign in to MobileMe Find My iPhone at me.com/find using your Apple ID email address and password.
If you’re a paid subscriber, your Apple ID is your MobileMe email address (@me.com or @mac.com) and password.
If you set up Find My iPhone on more than one device, click the device you want to remove in the Devices list on the left.
Click the blue arrow to the right of your device’s name (or, if the device hasn’t been located recently, the red clock ).
In the device window, click Remove (to the right of the device name).
The Remove link appears after Find My iPhone has tried and failed to connect to your device. This may take a few minutes.
When asked to confirm if you want to remove the device, click Remove.
If your device goes online again later and is still set up with your MobileMe account information, the device automatically reappears in Find My iPhone. If you still have access to the device, you can prevent it from reappearing in Find My iPhone by removing your MobileMe account information from the device. Tap Settings > Mail, Contacts, Calendars > [YourMobileMeAccount], and then tap Delete Account.

HT201210 TRIED UPGRADING OLD IPHONE FROM SOFTWARE 3.0 BUT NOW ONLY SHOWING SLIDE FOR EMERGENCY.HELP

Similar Messages

Maybe you are looking for