HT201210 Unknown error occurred (1015)
Dear sir/madam,
I don't know how to appear this message when I step by step when I update my IPhone from 3.1 to 4. OS.
Please help me about this error.
Thanks for your help.
Tim
That error message suggests that your Device could have been Jailbroken...
The discussion of Jailbroken Devices is against the Terms of Use of this forum.
http://support.apple.com/kb/HT3743
Similar Messages
-
HT201210 the iphone could not be restored. an unknown error occurred (1015).
the iphone could not be restored. an unknown error occurred (1015).
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
http://support.apple.com/kb/TS3694#error1015. -
I have updated my iphone 3 version 4.1.but in the middle of the updating time one message is coming.that is,(the iphone``iphone ``coundnot be restore and unknown error occured( 1015 )
Your phone is jailbroken. You can not get help here.
-
the iphone iphone could not be restored. an unknown error occurred (1015).
1015 error: There are 4 possible causes of this error:
The activation server truly is unavailable. Rare, usually fixed within minutes.
Your antivirus or firewall or router's firewall is blocking access to
gs.apple.com on ports 80 and 443.
Your iPhone is jailbroken or otherwise hacked.
The computer you connected to during the restore/update was
used to hack/jailbreak some other iOS device, and its
network database was corrupted during the process.
(Thanks to Lawrence Finch for the wording in
https://discussions,apple.com/thread/4793244?start=90 ) -
While upgrading my iPhone 3GS to iOS 4.2 something went wrong and came up with the message "The iPhone could not be restored. An unknown error occurred [1015]." Now it will not start at all. It just stays on screen with USB and the iTune picture. What can I do to get it going again. I only tried to upgrade because I was prompted to up-grade and now I am helpless. I did a backup before starting the upgrade. The error message did not tell what to do next. Any help is very much appreciated.
Usually that means the iPhone was hacked to unlock it from the original
carrier .
Updating the operating system locks it back to that original carrier
You could try this
http://support.apple.com/kb/TS3281
However if the iPhone was hacked it is probably a paper weight now
and as this is an Apple hosted forum you can get no further help here -
hi every body
trying to restore iPhone 3G 4.2.1 in the same virgin but in the last i get iPhone could not restored .an unknown error occurred (1015)
any body can help me
thanksI would like to know if there is a better to fix this since this iphone has been jailbroken. Google search only shows stuff that talks about installing software that has to do with jailbreaking. I just need to restore back to normal. Thank you!
deggie wrote:
Google "Error 1015 iPhone" and you will find a remedy. -
TS3694 the iphone could not be restored. an unknown error occurred (1015)
the iphone could not be restored. an unknown error occurred (1015)
That error is from jailbreaking your phone. It's now unfixable.
-
hello good samaritan out there ! am trying to restore my ios for for i phone 3G, but toward the end of the process, i am receiving an error message like "the iphone could not be restored, an unknown error occured(1015). Kindly help me resolve this problem, my iphone has been down for a we
mazunzo tembo wrote:
"the iphone could not be restored, an unknown error occured(1015).
Unauthorized modification of iOS > http://support.apple.com/kb/HT3743
ERROR 1015...
This Error Code is indicative of the Device being jailbroken / Hacked...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere. -
The iphone could not be restored. an unknown error occurred 1015
Hello everyone,
After upgrading to ios 4, my iPhone 3GS is stuck recovery and I am asked to restore it. However the operation cannot complete since at the end I get an error message that " the iphone could not be restored. an unknown error occurred 1015". What should I do? I am not close to any apple store and I cannot go there? Also, does the warranty allows me to get this fixed?
Thanks in advanceSo that means that there is no way this thing can get fixed? How about degrading the ios 4.3 to 4.2? Is there any legal way to do that? Any comment/help is appreciated
P.S: I was thinking about jail breaking it since it is the only way that Google is suggesting. Would that be a better approach since I am tired of living with out a phone? -
TS3694 the iphone"iphone" could not be restored. An unknown error occurred (1015)
I tried updating my iPhone 3 to the latest operating system via iTunes and once connected it would not work...
I then tried to do a system restore on the iPhone via iTunes and I was given the following error message: iphone "iphone" could not be restored. An unknown error occurred (1015)
The iPhone is now completely blank and just comes up with the Usb symbol to connect to iTunes on the screen, it won't do anything else and the same error message appears when I connect to iTunes....
Help....??
Thanks in anticipation....This error normally appears if you attempted to downgrade or modify your iOS. See here http://support.apple.com/kb/TS3694#error1015
-
The iPhone "iPhone" could not be restored. An unknown error occurred (1015)......How do I resolve this issue to be able to use my phone? Rather its restored back to 4.3.3 froom 4.3.5...I just want to be able to use my phone!
mazunzo tembo wrote:
"the iphone could not be restored, an unknown error occured(1015).
Unauthorized modification of iOS > http://support.apple.com/kb/HT3743
ERROR 1015...
This Error Code is indicative of the Device being jailbroken / Hacked...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere. -
i cant restore my iphone and it kept on giving me this infor 'the iPhone 'iPhone' could not be restored. An unknown error occurred[1015]
It's 99% sure theat the iPhone was hacked/jailbroken to use another carrier or downgrading IOS. There's no help with this.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
Message was edited by: ckuan -
The iPhone "iPhone" could not be restored. An unknown error occurred (1015)
I have had a huge problem since yesterday evening.
I can't get my iPhone to work.
First I tried to install firmware "iPhone11_2.0_5A240dRestore.ipsw".
That worked until I started the phone, I got a purple screen and couldn't get in to my iPhone.
So, I thought, "fine lets get the old firmware in place instead by restoring with: "iPhone1,11.1.4_4A102Restore.ipsw". I get the same message everytime after the restore is supposed to be done:
"The iPhone "iPhone" could not be restored. An unknown error occurred (1015).
I have been searching for a solution on internet and tried about anything. I still got the same message.
Please, if anyone has anything to contribute with, let me know.
/JohnModifying the baseband is is not something the iPhone software supports.
This is the warning when you update the iPhone:
"Apple has discovered that some of the unauthorized unlocking programs available on the Internet may cause irreparable damage to the iPhone's software. IF YOU HAVE MODIFIED YOUR iPHONE'S SOFTWARE, APPLYING A SOFTWARE UPDATE MAY RESULT IN YOUR iPHONE BECOMING PERMANENTLY INOPERABLE. Making unauthorized modifications to the software on your iPhone violates the iPhone software license agreement, and the inability to use your iPhone due to unauthorized software modifications is not covered under your iPhone's warranty."
Jason -
i forgot the password of my iphone 3g and when i try to restore it it shows the message"my iphone 3g could not be restored an unknown error occurred(1015)" can any body help please..
This error normally appears if you attempted to downgrade or modify your iOS. See here http://support.apple.com/kb/TS3694#error1015
-
i am know using iphone 3g ios 4.1. i want to update version 4.2. i tried 2 or 3 times but update is not completing. its showing ''an unknown error occured(1015). Now what can i do?
That error is usually indicative that the phone was hacked/jailbroken. Was it?
Maybe you are looking for
-
Text options in the new Preview (Yosemite)
Dear list members, in the old version of Preview (Mavericks), there were several options in the text box tool, such as outlined text. Now in the new Preview (Yosemite), those options are gone. Is there a way to reactivate them? Thanks!
-
I'm trying to install iCloud on my PC running Windows Vista with Service Pack 2 and I get a message that the set up program is not a valid win32 file. Can anyone help me with this?
-
How to create condition in OBIEE Answer 10g
Hi, I have two columns in one of my subject area table: Get_Comm_Period and Get_Period. Now I want to add a condition in one of the Answer request like below Get_Comm_Period <= Get_Period Can anyone please tell me how to do that because whenever I tr
-
Can't Connect ASDM and Console Forces User Name: & Password: Prompts
After pulling a brand new ASA 5515 out of the box this morning, I spent countless hours scratching my head wondering why: 1. I cannot establish an HTTPS connection to the Management port - https://192.168.1.1/admin 2. When connecting via the console
-
Displaying component in ADF conditionally
Hi, I need to hide/display some fields in an ADF application based on some conditions. Please let me know how to achieve this. Is it possible to get the value from a java code or DB to take the decision. Please help.