HT201210 WHAT AM I GOING TO DO IF STILL THE ERROR OCCURS 1602..IVE DONE ALL THE RESOLUTION BUT IT ALWAYS HAVE AN ERROR?

..ERROR 1602 OCCURS... WHAT AM I GOING TO DO? IS THERE ANOTHER OPTION OR SOLUTION ASIDE FROM APPLE SUPPORT PROCEDURES...

Has you iPad been jailbroken?
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
~~~~~~~~~~~~~~~
Also do a Google search using iPad error 1602 & you'll get many other suggestions.
 Cheers, Tom

Similar Messages

I cannot export projects from GB in my MacBook into GB on my iPad3; nor can I export from IPad to my MacBook. I have tried going onto Apps update on the MacBook, but there were none available. I have read that this omission is to be corrected - can you co

I cannot export projects from GB in my MacBook into GB on my iPad3; nor can I export from IPad to my MacBook. I have tried going onto Apps update on the MacBook, but there were none available. I have read that this omission is to be corrected - can you confirm this is intended to happen, or is it already in process. While awaiting for this essential development, can you please suggest any way of transferring information either way?

spicer_the_coalman wrote:
I cannot export projects from GB in my MacBook into GB on my iPad3
http://www.bulletsandbones.com/GB/GBFAQ.html#exportgbxtogbi
(Let the page FULLY load. The link to your answer is at the top of your screen)
spicer_the_coalman wrote:
nor can I export from IPad to my MacBook.
http://www.bulletsandbones.com/GB/GBFAQ.html#exportgbitogbx
(Let the page FULLY load. The link to your answer is at the top of your screen)

Unable to receive internet connection over wifi connection. Shows that I am connected to the network, but do not have internet access. Checked my firewall and turned it off. What else am I missing or should be doing differently?

Unable to receive internet connection over wifi connection. Shows that I am connected to the network, but do not have internet access. Checked my firewall and turned it off. What else am I missing or should be doing differently?

You might want to try resetting your router and your modem - just unplug the cords, leave them unplugged for about 3-5 minutes and then replug the modem and then the router in that order.
This may or may not correct your problem - call back if it doesn't.
Clinton

I cant connect to wifi but my laptop can and my other phones can.ived done all the recommendations in ipad support but still cant connect..what else shall i do?

i cant connect to wifi but my laptop can and my other phones can.ived done all the recommendations in ipad support but still cant connect..what else shall i do?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HT2534 i have an ipod touch but where it says phone number what do i put in because i thought the ipod touch doesn't have a number?

i have an ipod touch but where it says add your phone number what do i put in because i thought the ipod touch doesn't have a number???? help please

You dont put anything it doesnt have a number

I am trying to download mountain lion but the pc goes to sleep and stops the download even though I have set my power defaults to 3 hours

I am trying to download mountain lion but the pc goes to sleep and stops the download even though I have set my power defaults to 3 hours

aldofromwilts wrote:
I am trying to download mountain lion but the pc goes to sleep and stops the download even though I have set my power defaults to 3 hours
Try setting the Energy Saver to "never" and uncheck "put hard disks to sleep when possible". You can allow the screen to sleep after any suitable time.
Hope that helps. Regards.

HT201210 what should i do if a statement like "the iphone software update server could not be contacted" appear?

my iphone 3GS in recovery mode! what should i do if a statement like "the iphone software update server could not be contacted" appear?

Let's try the following document with that one.
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
(If the "Automatically detect settings" checkbox is already checked, try unchecking and rechecking it and clicking OK.)

My iPhone 3G will not turn on, but iTunes recognizes it to sync. Does anyone have any idea what might be going on? This was a sudden occurance-phone worked without issue before.

This afternoon I was used my iPhone 3G. I then put it aside (it was left on) for about an hour. When I went to use it again, nothing happens. The home button will not call up the lock screen. The lock button will not turn the phone on, off, or lock it. When I plug it into iTunes, it recognizes it to sync. Also if someone tries to call me it will ring on their end, but nothing on my end.
The iPhone is over two years old (purchased in April 2009), so it is out of warranty. Also, everything is up to date on the iPhone.
Does anyone have any idea what the issue might be?
Thank you in advance.
Shannon

What iPhone do you have? You can check in settings>>general>> about.
If you have a 3G you cannot update beyond iOS 4.2.1. The 3G is over 4 years old an was discontinued over 2 1/2 years ago. You need the latest ios to run the latest versions of some apps. If you have a 3GS you can update.
If your phone is not responding, reset it by pressing and holding down both the home button ad lock/ sleep button simultaneously until the Apple logo appears.

HT201210 what if it says itunes could not contact the iphone software update server , what to do ?

what if it says itunes could not contact the iphone software update server , what to do ?

99.9% of the time, the cause of this issue is the fact the phone was jailbroken/hacked to unlock it for use on networks other than the network the phone was originally locked to. Apple maintains a database of officially unlocked iPhones, and when Apple's servers detect phones such as yours, activation stops & you get the message you got.
So, either get a sim card from the carrier your phone was originally locked to, or get it officially unlocked, because it appears that it was not officially unlocked.

When ever i go to watch videos on youtube or any other apps, the screen goes black. you can hear the video but you cant see anything. how do i fix this?

i have an ipod tough 3g and its like about 4 to 5 years old it works perfectly fine except the home button is abit messed up and the ipod sometimes crashes. but other than that everything is fine. so i was watching something on an app and then al of a sudden i dont see the video i can just hear it. i then think its just the app but when i go on youtube the same exact thing happens. you click to watch a video and you can hear it perfectly but you cant see anything. the screen is just black when u ONLY watch a video. this happened last night so yea.i really hope somebody can help me figure out how to fix this and whats wrongwith it:)
thanks for your time and help!
Noor .T.

When it goes black do a very short press of the button on the right upper side of the phone and the screen will reappear. Make it a very short quick press.
OTOH, if you are using the speaker so you can watch the screen as you are talking when it goes dim touch the screen anywhere that it is blank and it will again go bright. On long calls you have to repeat this.
Many folks have had the same problem you described and what I have told you is the best and ONLY way around the screen going blank during a call.
JerryF

How to find out what computers user logged on? (not at the moment but history)

Domain Controller: Windows 2012 R2 - Unfortunately, I don't manage DC but my own OU (computers and users)
I have a user working mid-night shift reporting that he received error message "The group policy client service fail the logon, access denied". He is using multiple PC and he did not remember which PC gave him the error message. How do I find out
which computers he logged on? I have access to my domain OU. I can manage my own Computers and Users objects in my domain (no domain controller in my department)
I searched internet but most of them are finding out which computer user is currently logging on - not the history, thanks.
Thang Mo

To fix this error, please follow the steps given below and check if it helps you to resolve the issue :
1. Logon to the machine with a machine administrator account (assuming this issue is with a domain account, if not logon to the machine using another account with administrative privilege).
2. Move the machine to a work-group from domain. (If it was part of one work-group then change it to another one or join a domain.) You could do this through Control Panel\System and Security\System and then Change Settings.
3. Restart the machine and logon with a machine administrator account.
4. Delete your user profile data (or move it a different location) completely from c:\users. "C" in my case is system directory but if you have a different one then use that one.
5. Join the machine back to domain account (or to work-group that the machine was originally joined to), and restart the machine.
6. Logon with your domain account that you were having trouble with. Keep fingers crossed.
If all goes well, you should be logged on.
Coming to the second query, if the user are in DC, you can try our free tool
Lepide last logon reporter that will help you to get the logon details by specifying Domain Name/IP of the Domain Controller, User Name, Common Name and Last Logon Time.
Lepide - Simplifying IT Management

What happened to panoramic wallpapers? There is still the category but they work as a normal image, What happened to panoramic wallpapers? There is still the category but they work as a normal image

What happened to panoramic wallpapers? The cathegory still exists in the settings but they work as a normal image

Pls

Hi I have used my macbook pro with miniport to HDM, and it was working fine. Hadnt used it for a month and now when I connect the TV, the screen on the mac goes blue then back to the page but nothing comes up on the TV. Any ideas?

Hi I have a year old Macbook pro. I was using a miniport to connect it to the TV via HDM cable. It was working fine but I have used it for a couple of months kept it in a drawer and now it doesnt work. When connected to the TV the screen on the mac goes blue as though there is some signal then back to original screen but the TV doesnt show what's on the laptop. Please any suggestions, thanks??

Hello nothingissecret
Check out the article below for troubleshooting steps to resolve the issue. One would be to try a different cable or adapter to test with the television.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Thanks for using Apple Support Communities.
Regards,
-Norm G.

TS4009 My iCloud storage is full and I need to delete some stuff. Can anyone tell me what is important to keep and what not? I have done all I can but it still says I need to delete before I can back up on iCloud.

My iCloud storage is full and I need to delete some stuff. Can anyone tell me what is important to keep and what not? I'm just not sure what I really should back up each night and what doesn't really matter. I know my photo's should back up, but other than that, I'm not really sure.
I have taken some pics off and videos and appt, but it still says I need to delete before I can back up on iCloud. I'm starting to wonder if its a glitch with my personal phone. Can anyone help me?
Thanks!

Only you can decide what's critical to back up. One option is to import your photos and videos to your computer (see http://support.apple.com/kb/HT4083), then either delete them from your phone or exclude the camera roll from your backup in settings.
You might try going to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll), then look at the size of your next backup. If it doesn't go down significantly, something else is wrong.

What is wrong with my computer I replaced the fan but it's not running

Thank you Allan Eckert that would of helped but right now I figuired out what exactly was wrong. My mac seems that it's fan doesn't run after the replacement. Litterly what I did to test this is test another mac with smc control and that one ran at 2000rpm for fan speed. My mac fan does not run at all its at 000rpm. How can I fix this problem myself besides apple if I can? Any suggestions? Yes It's a 13 inch mac book pro we have 3 but one for each of us. I would like to know why isn't it running thank you for the help if you can give any answers.

It should always be running a little bit whenever the Mac is on.
The part could be defective, or the wires on backward.

HT201210 WHAT AM I GOING TO DO IF STILL THE ERROR OCCURS 1602..IVE DONE ALL THE RESOLUTION BUT IT ALWAYS HAVE AN ERROR?

Similar Messages

Maybe you are looking for