HT201210 what do you do when the 'cord' and the 'itunes' symbol come up on your screen?
what do you do when the 'cord' and the 'itunes' symbol come up on your screen?
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Similar Messages
-
what do you do when acrobat 8 standards serial number no longer works on your computer when downloading?
Your iPad can backup to the computer or it can backup to iCloud. It cannot do both.
http://support.apple.com/kb/ht1766 -
I tried to restore my ipod touch 2nd generation and now it won't sync to itunes. On the screen is the USB end of the cord and the iTunes logo over it.
I have turned it off and on, held the off button down and the select button down but it still comes up with that picture on the screen. Have I broken it?
Please help.
MimiIt means the device is in recovery mode. You'll need to reconnect it to iTunes and restore it again.
You may need to connect it in recovery mode manually using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock -
My notebook cord recently short fused the office. I have replaced the cord and the computer seems to working fine, except the internet wont work. It states it is connected in the network preferences. can any one help?
Hi LanaJay84,
If you are having issues connecting to the Internet from your Mac, you may find the following articles helpful:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
http://support.apple.com/kb/ts1317
Regards,
- Brenden -
What can you do when Ipad upgrade said "Ipad cannot be updated at this time because the ipad software update server could not be contacted or is temporarily unavilable. Please try again later.
Where can I download the ipad software myself?What entries do you have in your HOSTS file on your PC/Mac?
If you have ever used TinyUmbrella your HOSTS file could be redirecting the request to a local server or Cydia.
Look for any entries which redirect gs.apple.com and comment out or remove. -
What do you do when a DVD is the only footage you got?
Ok so here's the story, I posted something like this about a week ago on a earlier forum discussion, but now some of the apsects have changed.
A family member took some of our 8mm reel film into a transfering place to have the footage put on DVD. Well the DVD turned out great, but I wanted to take part of that DVD and edit it so I could make a documentry tribute film about my Dad whom passed away awhile back. On that DVD there is about 8 minutes of good footage of him that I would like to use, so I used a trial DVD ripping/converting software and converted it to MPEG2 and the results were great, quality appeared just as good as the DVD and I would be fine with using that for my documentry/tribute film, when I imported it into Premiere 1.5 it plays fine on the monitor and it actually plays great on the timeline, no complaints. Now when I go to render it, it plays all jerky like the frames get all messed up or something. On that earlier discussion that I posted this information, people had responded that I need to get the original 8mm film and have it transferred to mini DV or on a hard drive so I can edit it from there. Well the problem with that is the original 8mm film got thrown out after the DVD was made, so all I have is the DVD. Is there any setting I can change in Premiere so it isn't all choppy like that when I render it or is there a way I can have the DVD transferred to mini DV tape and then edit it in Premiere as usual? I'm not sure what to do and I really need the footage off the DVD. I do realize that I'm going to lose quality, but this is all I got, so I have to make it work. Do transfer video places have the ability to put a DVD into a format which wont lose much quality, is it possible to have them transfer it to mini DV or is there a way I can? Please, please help,
Thanks,
JasonFor those following along at home, I responded to Jason via PM.
Much will be eliminated, but given the situation, my recommendation was to use either a digital video camera with passthrough capabilities (or A-D bridge) to feed from the DVD player and capture as DV-AVI Type II for editing. Yes, there will still be the first MPEG-2 compression (no way around it), and then, if DVD-Video is the intended output, another Transcoding to MPEG-2.
I had suggested going up to the max with the bit-rate, when Transcoding this section for use in a DVD-Video.
I'm hoping that someone else has an even better plan for Jason, so that the very best possible output can be obtained, regardless of what the source footage is in this case.
There is also no need to suggest going back to the original 8mm, as they no longer exist. Obviously, if possible, that would be the ideal, and just telecine to a miniDV tape. Unfortunately, that is not a possibility.
Open to other ideas,
Hunt -
plz help i am far from home and this phone is me maps and love ones and life realy so in was on the beach and fell a sleep woke up to tide phone got wet and dryed it put when i turn it on it give me the power calbe and a itunes
Expanding on what TheDave said, it's in Recovery Mode. You can try this to get it out of Recovery Mode:
Unplug the device from the USB cable if it's connected. Then hold down the sleep/wake button until it turns off. Let go of the button and then hold it down again until the Apple logo reappears. Let it go and the device may boot up.
This only works, of course, if your device was working properly previously. Otherwise, or if that doesn't get it back to normal operation, you'll need to to try to restore it:
http://support.apple.com/kb/HT1808
If it won't restore, or if after the restore the iPhone misbehaves, then as Dave indicated it's suffered hardware damage and will need to be taken or sent to Apple. Even if it works now, it's very likely that it will fail in the future as the salt corrodes the device, so getting it replaced now is probably a wise idea since as it is you can't trust it.
Regards. -
I attached Ipad to my computer to sync. I received a message indicating there was a new version of the software. During the update, the Ipad crashed. The screen on the ipad is showing the iTunes icon and the USB cord. The ipad no longer shows up in my devices. I have followed all instructions online to reset the ipad,and I uninstalled iTunes and reinstalled it. No change. The same screen appears on the ipad within seconds of turning it on.
Same here. And iTunes doesnt recognize the ipad anymore, even though it works fine with my iphone. Plugged the ipad into my other laptop, i get the recovery mode message, but nothing works.
Tried calling apple support, but since my 90 days of free phone service is past, those morons want me to buy applecare. Yea, ill pass. -
I'm trying to sync my iPhone 4s to my Mac iTunes. My whole libary: music, movies, etc is only 26 gb but when I press the sync button I am prompted that I do not have enough space I need an extre 22 gb. So I thought if I were to restore it, it would help, but yet I am prompted with this message. I am just running into one wall after another and I need some help.
iOS: Resolving update and restore alert messages
For error -50: See error 13 and 14:
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network. -
What do you do when you can't read the code on a iTunes gift card?
What do you do when you can't read the code on a iTunes gift card? I tried taking it back to the store with my reciept, but they said I would have to contact Apple support. Am I out just out $25 dollars?
See this support article:
http://support.apple.com/kb/TS1292
Instructions are at the bottom of that article.
BTW, this forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. Normally you want to ask your questions in the general iTunes forums.
Regards. -
what do you do when your phone numbers no longer have the contact persons name just a number. Also names are missing from the address book where contacts are.
I, too, love everything about my phone. The other day I tried to crash my Z10 by running multiple apps and having videos running in the background. Do you think my Z10 showed any signs of slowing down? Nothing doing! It ran as smooth as silk. I'm very impressed.
Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated. -
What do you do when you turn ipod touch on and the apple apears and stays on wont turn off
what do you do when you turn your ipod touch on and just the apple appears wont shut off
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
what do you do when you download a show and it has no sound? ( the volume is up on itunes and my computer)
That's what iTunes -> Preferences -> Playback -> Sound Check does - equalizes the volume across tracks to provide a more-even playback.
-
What do you do when it says the required disk cannot be found?
What do you do when iTunes says the required disk cannot be found?
Quit iTunes, restart your iPad, restart your computer and then try again.
If you have another USB to dock connector cable - use that one when you try again. Use another USB port on the computer as well. -
What do you do when your contacts with IPHONES or IPADS are not showing up in blue in IMESSAGE on my IPAD. The are showing up in RED and not allowing me to IMESSAGE them at all.
It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!
Maybe you are looking for
-
My iPod Touch battery is not working. I requested a repair through the Apple Support. On the final page, when I clicked the button that puts the info through with your credit card number, the resulting page gave an error (I wish I'd have saved it!).
-
How do I play a video in full-screen mode on one screen of a dual-screen Windows 7 system without blanking out the other screen? Not losing the other screen would be useful as I would like to, for example, monitor my emails whilst watching a video o
-
After calling XDO data engine, error is coming but report is completing.
There is a strange situation i am facing with one XML report.XML data definition of this report has two trigger. One before report trigger and other after report trigger. While running(using concurrent program) the report is completed with following
-
G5 will not boot from system disk or from Tech Tool Pro 5
Hi everyone - Having a bit of trouble and hoped I might find some answers here. I suspect my system drive was having some issues as it sounded like it was being taxed and strained as I would open up applications from it. Upon verifying the disk using
-
Inserting a Line in front(top ) of a imageview Problems. (x,y) issues
Hi Guys, so, im making a concept of a Round-robin , i think. Its called Fila Circular in Portuguese. Anyway, the thing is, every time the user press Push, a ball(aka circle) must enter the [index] of the hexagon. But, im having issues making the path