HT201210 when i try to restore my ipod it says there is an error,is there any way i can fully restore it wothout a problem
everytime i try to restore my ipod the first step is fine but then it just stops and says error. Is there any way i can stop this?
Hello,
Try completely reseting the device back to the factory defult, then try to restore it again.
I hope that works.
~Lt. Leviathan
Similar Messages
-
I changed my ipod password and now when i try to unlock my ipod it says wrong password. Is there anyway i can get into my ipod without restoring it?!?!?!?!?!?!
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
A Complete Guide to Recover Your iDevice if You Forget Your Passcode
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake
and Home buttons at the same time. When the device turns off, release the Sleep/Wake
and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device.
The device should turn on. Note: If you see the screen pictured below, let the device
charge for at least ten minutes to ensure that the battery has some charge, and then
start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button.
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
When I try to sync my ipod it says it cannot be synced because "a duplicate file name was specified". What does that mean and how can I fix it??
I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
I keep getting an error message when I try to sync my iPod that says "the required disk is missing". I don't have a clue what they are asking for..
Try deleting the iPod Photo Cache folder. If location can be found here:
iTunes: Understanding the iPod Photo Cache folder -
I have an IPod 4 and when I try to update my IPod it says make sure your network settings are correct and your network connection is active. How do I make it update?
Are yo getting a network timeout error?
Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error. -
Is there any way to create a time machine backup to an external hard drive with content already on it? I have a hard drive that i have used for pictures but when i try to run a backup it says i need to start from a blank drive. Can i get around it?
It would be much better if you had separate drives for the pictures and Time Machine backups.....but, if you want to use the same drive for both purposes, temporarily move the folder with the pictures to another location for safe storage.
Run the Time Machine backup on the hard drive and verify that everything is working correctly. Time Machine will format the disk for you in Mac OS Extended (Journaled) as part of the backup process.
Then move the folder with the pictures back to the hard drive with the Time Machine backups.
When you have tested to make sure that everything is working again, then and only then should you delete the folder with pictures from the temporary storage area.
Again....it would be much better to keep Time Machine backups on a drive just for that purpose, and other data on another drive for that purpose. This is clearly one of those times when the fact that you can do something does not mean to imply that you should do it. -
When i try to open docs in mail box i get an error msg : there is a problem with adobe acrobat/read
when i try to open docs in mail box i get an error msg : "there is a problem with adobe acrobat/reader. If it is running please exit and try again (1014:1014)"
I have the same problem also but solved with the solution from http://www.brain-cluster.com/blog/orange/2011/03/06/there-problem-adobe-acrobatreader-if-it-running-please-exit-and-try-again
-
I downloaded news Keynote version but when I try to open it the compute says I need to update it. Any ideas what could be going on?
Delete Keynote then download.
-
I am the administrator of my MacBook Pro, which I share with my kids. One of them forgot his password, so as the admin I changed it for his account, but when I try to see his account, it says I need to provide the keychain password. How can i get it? I have no idea how to sort this out...
First, make sure caps lock is not on.
You must back up all data before continuing, unless you've already done so. If you need to back up but can't log in, ask for instructions.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, boot into Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead the instructions on this page:
If you forget the password and FileVault is on -
how do I open and use this app after I have paid for my subscription? I previously downloaded Primeir Pro CC for the trial and when I try to open the app it says my trial has ended and there is no other option to sign in and use the app?
Remove all current Adobe software. Download Adobe Cleaner Follow instructions.
-
We have created account, and password, but when we try to rent a movie is says password is invalid. It is not, because we can access the websute using it. Anyone help me. We have checked over and over. What are we missing?
On your mac/Win PC can you log into the iTunes Store with your Apple ID and password??
Can you download one of the free songs/books/ videos (look under Free on iTunes)? -
I have a new PC w/ Win7 and Ipod is not recognized. I think I need to restore the Ipod but am unable to do so. thanks to any /all who can assist.
Hello kevin
Check out the article below to guide you to the proper article to get your iPod shuffle to show up. You will need to see if it shows up on your computer as a device in My Computer section in Windows Explorer. Then it will help you pick the right one.
iPod not appearing in iTunes
http://support.apple.com/kb/ts3716
Regards,
-Norm G. -
When i try to sync my ipod it says i don't have enough access privileges to sync
When I try to sync my Ipod 5 it says that I do not have enough access privileges to sync my ipod
iPhone - not enough access privileges: Apple Support Communities
ITunes Access Privileges Error?!?!: Apple Support Communities
access privileges for Itunes: Apple Support Communities
Access Privileges: Apple Support Communities -
like on graiglist when I look for job and press the reply button to send my resume info to the employer, I get this error message all the time.
The add-in “C:\PROGRAM 1\AVG\AVG8\avgxch32.dll” could not be installed or loaded
This problem may be resolved by using Detect and Repair on the Help enu. Unable to load.
You may be out of memory out of a system resources, or missing a .dll file.
and the error message i get when i try to run or download an application
is is not a valid Win32 application[[Firefox is already running but is not responding]] has steps that you can try. It sounds like you may have something that is hanging your browser on exit (probably an extension or a locked profile) and the steps on that page should help clear it up.
-
i need help asap because i keep getting kicked off of facebook and twitter because of the update in the software.
On the computer go to iTunes>Preferences>Devices and select the backup and click on delete.
For more information see:
iOS: Troubleshooting backup issues in iTunes
Maybe you are looking for
-
JMX, Firewall and javaagent option
Hey all, I'm working on setting up JMX monitoring on the JVMs running in our environment. Most of those JVMs are running third party applications supplied by our customers and are heavily protected by firewalls. So i needed to use the JavaAgent strat
-
I've had my MacBook for about 5 months. Recently (the past month or so) I've noticed the cooling fan running a a lot. Even if it's in a cool environment, sitting on a desktop, it will sometimes run constantly. There are only a couple of applications
-
i am able to run my applet via appletviewer but IE6 responds class not found. IE version (6.0.2600.0000) i have compiled my code using jsdk1.4 Beta version is this a version problem?
-
How do I take a recorded disc and burn that to a blank disc
Hi I need to take a recorded disc and burn it to a blank disc
-
Hello. I asked this question in the FCP forum, and was directed here. Hopefully I can get some help. Hello. Is there a way in FCP (or, rather, Motion here) to have a certain point in your video be "anchored" and "followed" by another "point", so to s