HT201210 why every time i try to restore my ipod it pop out an errow
like 4real why cant i just restore my ugly ipod.............dang
Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors.
http://support.apple.com/kb/TS3694#error28
Similar Messages
-
I found my brother's old 1st generation iPod. An unknown error 1442 keeps appearing every time I try to restore the iPod.
Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors.
http://support.apple.com/kb/TS3694#error28 -
HT4859 every time I try to restore my ipod it does not work...how come?
every time I try to restore my ipod it does not work...how come?
The only way to clear off the passcode is to restore the device. You could always try the restore process on another computer that has iTunes just to get the iPod working again, then you could plug it back into your comptuer to sync all of his content back on the iPod.
-
Im getting error 14 every time i try to restore my ipod touch,any fixs?
im getting error 14 every time i try to restore my ipod touch? anyone know how to fix this?
i have itunes 9 and this problem started when i bought the new itouch software. i have alreay tried deleting itunes then re-installing it.Well, the problem isn't the back up because I already have a backup saved that I can restore from, I honestly don't know how, but I do, and it has all my apps. The problem is restoring it. I keep getting the "There was a problem downloading the software for the iPod "King". A duplicate file name was specified. With my 3G iPod touch, I did not have it named as "King". I had it as another name. I don't know if that helps, but as I said before, Backup-wise I'm okay for now. Restore-wise I'm not.
NOTE: Reinstalling iTunes doesn't help. -
TS3694 every time i try to restore my ipod it says "error"
Every time I try to restore my Ipod it says "error"! heeeeelp!!
What error are you getting? Check the codes out here.
http://support.apple.com/kb/TS3694
http://theiphonewiki.com/wiki/index.php?title=ITunes_Errors
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
Im getting error 14 every time i try to restore my ipod touch?
im getting error 14 every time i try to restore my ipod touch? anyone know how to fix this?
i have itunes 9 and this problem started when i bought the new itouch software. i have alreay tried deleting itunes then re-installing it.Well, the problem isn't the back up because I already have a backup saved that I can restore from, I honestly don't know how, but I do, and it has all my apps. The problem is restoring it. I keep getting the "There was a problem downloading the software for the iPod "King". A duplicate file name was specified. With my 3G iPod touch, I did not have it named as "King". I had it as another name. I don't know if that helps, but as I said before, Backup-wise I'm okay for now. Restore-wise I'm not.
NOTE: Reinstalling iTunes doesn't help. -
My son can't remember his passcode for his iPod touch and for some reason every time I try to restore it, the software gets updated and it starts processing it then it says there was an error and to try again later. Later, it still does and says the same thing. Is there any other way to unlock it without the passcode?
The only way to clear off the passcode is to restore the device. You could always try the restore process on another computer that has iTunes just to get the iPod working again, then you could plug it back into your comptuer to sync all of his content back on the iPod.
-
Every time I try to restore my iPod touch 4G, I get an error message.
I plug my iPod touch into my computer, open iTunes, go to Devices, go to my iPod touch "King" and click on Restore. It asks if I want to Back Up the iPod, I choose Don't Back Up because I already have a Back Up I want to restore it to. Then the usual, "Are you sure you want to restore the iPod "King" back to its factory settings? All of your media and other data will be erased." I click restore and it gives me a warning about how I haven't transferred my purchases, and they'll be lost. I wasn't worried about that so I skipped that. Then it gave me the iOS 6 Software update description, clicked Next. Then the License Agreement, wont through that. After I pressed agree, I got an error message saying: There was a problem downloading the software for the iPod "King". A duplicate file name was specified. I did have another iPod touch used with this iTunes (3G), same music, plus more on my 4G. I'm using iTunes 10.7, the latest one, and Windows 7. The restore works on my laptop, but it doesn't have the Back Up I want.
What do you think the problem is?
And how can I fix it?Well, the problem isn't the back up because I already have a backup saved that I can restore from, I honestly don't know how, but I do, and it has all my apps. The problem is restoring it. I keep getting the "There was a problem downloading the software for the iPod "King". A duplicate file name was specified. With my 3G iPod touch, I did not have it named as "King". I had it as another name. I don't know if that helps, but as I said before, Backup-wise I'm okay for now. Restore-wise I'm not.
NOTE: Reinstalling iTunes doesn't help. -
I Put my iPod in my locker before lucnh and it was off, i went to go and turn it back on for math class and it wouldn't...... i plugged it into my computer and it says iPod is in recovery mode...... and it sujested that i update, and restore so i though okay.... it did the update but everything the restored comes it starts and stops and says "The iPod could not be restored. an unknown error occured (28). why does this keep happening?? please tell me i don't know what to do.......
Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors.
http://support.apple.com/kb/TS3694#error28 -
ive tried re
A Complete Guide to Restore or Recover Your iDevice (or if you forgot your passcode)
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
If you need to restore your device or if you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to
update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake
and Home buttons at the same time. When the device turns off, release the Sleep/Wake
and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device.
The device should turn on. Note: If you see the screen pictured below, let the device
charge for at least ten minutes to ensure that the battery has some charge, and then
start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button.
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
(The iPhone "Named" cannot be restored at this time because the iPhone software update server could not be contacted or is temporarily unavailable.)
can anyone help me with this issue, every time i try to restore it will come up like this error message.Restore the iPhone when connected to iTunes by cable.
Still the same TS1275?
Is your iPhone jailbroken?
Or
Has your computer ever been used to jailbrake or downgrade (Tinyumbrella) any iPhone? -
i upgraded my iphone4 to ios 6.0.1 but my phone reset it self and its in recovery mode & every time i try to restore my phone its saying error 2001 or 2006 & my lock button is broken so i cant put my phone in dfu mode what im i suppose to do help me pleas
Hi, to get your iPhone 4 back to normal, here're two ways for you.
1. Use Dr.Fone for iOS. The free trial version can fix iPhone screen of death. The free trial version can do that, you don't have to pay.
Just download and install this software on your computer and connect your iPhone 4 to computer with a USB cable. When it detects your iPhone 4 is abnormal, click Restart the device to get your iPhone 4 to be normal.
2. Use iTunes to fix it.
Step 1. Make sure that the latest iTunes is installed on your computer.
Step 2. Plug into a USB cable to connect your iPhone4 to computer.
Step 3. Press and hold the Home button and the Sleep/Wake button at the same time for about 10s.
Step 4. 10 seconds later, release the sleep/wake button. But continue to hold the home button until a message comes out, saying "iTunes has discovered an iPhone 4 in recovery mode, you must restore this iPhone before it can be used with iTunes".
Step 5. Click your iPhone 4 in the left sidebar to show the device control panel on the right. Then, click Summary.
Step 6. Go to Backups section and click Restore Backup.... In the drop-down list, choose a backup file and restore to your iPhone 4 -
Why every time I try to open InDesign CC on Mac OS Maverick I get a "heap corruption detected free list canary is damaged" message and the application crashes?
PLI am on Windows, but have a few saved Mac discussions that may help (or, may not... but free to read)
Mac and Root User http://forums.adobe.com/thread/879931
-and http://forums.adobe.com/thread/940869?tstart=0
Troubleshooting guide for Mac freeze
http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html -
Ipod classic unregisters from mac every time i try to restore with itunes
i have a 7th generations 120 g ipod. every time i try to restore it, you hear an audible click as it unregisters itself from my computer. And it will keep appearing and disappearing in that manner until i physically remove it from my computer. even when i hit eject, it just re registers itself then a few seconds later it un registers itself again. i have tried everything i have read from this forum. i have erased it's contents, i have put in in disk mode, I have put it in recovery mood holding buttons for 12 seconds. nothing works. as soon as its almost done restoring it un registers itself and i am unable to restore it. and the computer keeps telling me its corrupt after i've erased it with disk utility. please help. i have also gone into the configuration and looked at the stats. i don't see anything thats says there is anything wrong with the hard drive.
Hopefully this article will assist you:
≈≈≈≈≈≈
http://support.apple.com/kb/TS3694
≈≈≈≈≈≈
Please do reply with results/questions. -
i have a iphone 4s and its stuck at the apple logo to comes up then fades away and every time i try to restoring with iTunes it gives me a 4013 error i changed the charging port/dock and the battery ive also used a different computer and cable
See: http://support.apple.com/kb/TS3694#USB
However, the most likely reason is your self-repair of a device that is only factory repairable broke something. Note that Apple does not sell replacement parts, so whatever parts you used were not made by Apple's supplier and are of questionable quality.
Maybe you are looking for
-
How long will it take to download and install this OS?
I want to update my Mac OS to the Lion OS; I just paid for it. how long would it take to download and start the istallation process through a wifi connection? I see the lion and the downloading bar however, it does not seen to be advancing. thanks,
-
New iMac brightness level keeps changing (auto adjust NOT checked)
Just got a new 27 inch iMac and keep on having to change the brightness level back to the brightness I prefer. I do not have auto adjust checked, I put the brightness slider up to the level I like and after a while the brightness dims to what seems l
-
By default, RID master allocates 500 RIDs to each DC. When a DC runs out of RID and requests extra RID, how the allocation is done? e.g if DC1 request additional RID pool, will RID master allocated extra pool only to requested DC or for all? If it al
-
Sequences in order - 10g r2 RAC
Hello, we have a j2ee application against Oracle 10g r.2, which uses sequences (over ten approximately). These sequences are used to assign automatically value to the primary key of registers of several tables. In production environment, we have RAC
-
Spamtrainer and future dated spam
I'm running: Mac OS X Server 10.4.11 Updated the components from osx.topicdesk.com Cron job for spamtrainer I noticed that spam with a date in the future does not get processed and erased when spamtrainer is run by the cron job. Is this normal? Shoul