HT201210 why i can't syn some application after restoring

Why i can't sync some application from my mcbook back to my iphone after i upgraded to ios 5.1.1?

Have you checked that those Apps are Compatible with iOS 5.1.1

Similar Messages

HT3702 Why I can't purchase some application in App Store?

I'm want to buy a vpn in vpn express so I can use Facebook but I don't know why I can't buy vpn.

VPN Express is an in app purchase meaning the app is free but you must pay for the subscriptions which requires a credit or debit card be on file.
iTunes Store: Changing account information

Does anyone know why I can't activate my phone after restoring to factory settings?

I bought my iphone from Ebay about a year ago. I didn't realise it was jailbroken. When I updated the software before Christmas, I kept losing signal. I tried resetting it and have now restored it to factory settings but now I cannot activate it. Can anyone help me? Please?

The jailbreak made unknown changes to your iPhone and when
you restored the iPhone, it was relocked to the original carrier.
Only that carrier can unlock the iPhone, and the jailbreak may
prevent that from completing.
Google might provide some assistance, but Terms of Service
prohibit jailbroken iPhones in these fora.

Why i can't activate my iphone after restoring into version 6?

(Your iphone could not be activated because the activation server is temporarily unavailable.Try connecting your iphone to itunes to activate it, or try again in a couple of minutes).
I TRIED ALL BUT DIDN'T WORK??? ANYONE FROM TECHNICAL SUPPORT CAN SOLVED THIS PROBLEM? THANK YOU...
Message was edited by: yman81
Message was edited by: yman81

This is because your phone was previously jailbroken.
You will never get the phone to activate.

I used iphone 3gs iOS 6.1.6 why i can't open an application camera 360 ultimate

I used iphone 3gs iOS 6.1.6 why i can't open an application camera 360 in my iphone

Hello Kunmon,
The following article provides some useful troubleshooting that can help get your iPhone's camera working correctly.
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen

Why I can't open some video in my facebook?

Why I can't open some video in my facebook?

Hi Chris.
Ok every son gneeds artist and album, but why in my 20 G photo Ipod I can see the songs searching via artist without any problem. And why in the new 30G video Ipod it only happens with some artists, cause for example I have 40 u2 songs, some with album name and some not, and all of them appear searching via artist. But with another artist, for example def leppard, I have 15 songs (some with album name, and some not) and searching via artist I can see only the ones in some particular album, and others that also have album name dont appear unless I look for them via song

Why You Can't Load Some Images On Your 5th Generation ipod

Why You Can't Load some images on your 5th Gen ipod.
- OK here is the scoop: I could not load some images on my 5th gen ipod and yet other images would load no problemo. Images were JPEG, jpg, PSD (all approved image types for the 5th gen ipod)
- After doing several tests like restoring the software on the ipod, reinstalling itunes I still could not find the problem, then I noticed as soon as I would open an image in Photoshop CS2/CS3 that was otherwise loading on the ipod no problemo, when I would save that same image in Photoshop the image would not load in my ipod.
- So after playing with several settings in Photoshop I found the problem:
-In Photoshop go to File handling:
-Image Previews:
- And click on:Never Save
You do not want to save a photo with a "Image Preview" when saving any file type that you want to load on your 5th gen ipod. it would seem the ipod will not accept any images with a "Image Preview" embedded into the file, JPEG, PSD, jpg etc.
I hope this will help some of you because I just waisted a whole day to find this out the hard way.
Cheers,
Mac Fans
BTW I use a Mac Pro/Intel OSX Tiger 10.4.9

Also I just found out when you are saving an image in Photoshop uncheck the " Embed Color Profile" box.
So do not embed your images with a "Preview" and DO NOT embed a "Color Profile" when saving images in Photoshop or the images MAY not load on your ipod.
Have Fun
Message was edited by: MacPro77

I can't rate some application I have.

I can't rate some application I have. For example, pages app. It says you must own it in order to rate. I already have it installed on my ipad air.

Have you checked that those Apps are Compatible with iOS 5.1.1

Why itune can't syn my musics, videos, etc to my phone after updating both my iphone 4s to IOS 7 and itunes to 11.1.0.126??

What is wrong?
Why itune can't syn my musics, videos, etc to my phone after updating both my iphone 4s to IOS 7 and itunes to 11.1.0.126??

what doe you mean you tried "basically everthing?" Did you follow http://support.apple.com/kb/ts1538?

HT203167 Hi does anyone know why I can only see some of my films in the purchased section on iTunes ????

Hi does anyone know why I can only see some of my films in the purchased section on iTunes ????

"Do you know if its something they are in negotiation to sort out ????"
No way to knwo unless Apple or the studios announce.

Why I can not give the application? I have money in the account at the expense of Gift cards, and I am forced to fill payment information

why I can not give the application?
I have money in the account at the expense of Gift cards ($19.80), and I am forced to fill payment information

We are not Apple employees here. Everyone here is just a fellow user. You can comment to Apple via their feedback page, if you wish:
http://www.apple.com/feedback/itunesapp.html
but Apple does state in a number of places that you cannot use a gift card to buy other gifts, including the purchase page in the Apple Store.
Regards.

When I sign in my CC Photo account it says "can't download some applications now, but it says that all the time.

When I sign in my CC Photo account it says "can't download some applications now, but it says that all the time.

Nobody can tell you anything without proper system info or other technical details.
Mylenium

CAN'T open any applications after mac os update 10.4.11

CAN'T open any applications after mac os update 10.4.11 help

General advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://support.apple.com/kb/DL170
And for Intel Macs here: http://support.apple.com/kb/DL172
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.4.11 update here: http://support.apple.com/kb/TA24901?viewlocale=en_US
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was [i]not[/i] a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
[b][i]Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on.[/b][/i] Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

I can't open any application after updating to 4.3.5

i can't open any application after updating to 4.3.5???!!
can someone help..?
before this i coudn't listen to music with my intern speaker.

- Try a reset. Nothing will be lost:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Try downloading/installing a new app.
- iOS: Troubleshooting applications purchased from the App Store

How I can closed all open application after update to iOS 7.0.2.0?? Before this v iOS7 we was can closed any application's open :(

How I can closed all open application after update to iOS 7.0.2.0?? Before this v iOS7 we was can closed any application's open :(

There's no good way to do it. But you don't need to. iOS 7 automatically handles whether an application takes up memory or has files open. There's no real advantage to you ever closing an application yourself.
If you are having problems with a particular app, please describe them.

HT201210 why i can't syn some application after restoring

Similar Messages

Maybe you are looking for