HT201210 your ipad was upated successfully.There are just a few more steps to follow, and then your done?
Hi
My Ipad syas Update completed ....then belwo message
"your ipad was upated successfully.There are just a few more steps to follow, and then your done!
Continue
What happened when you followed the instructions?
Similar Messages
-
apps froze up
If it's frozen press and hold the Sleep/Wake button and the Home button at the same time until it powers off. Then power it back on and proceed.
-
Hi, My friend has just updated there 3GS to IOS6 and once it's done, 2 screens appear. first one says, Update complete, there are just a few more steps to take. Press continue and another screen comes up with the itunes symbol and the cable and says connect to itunes. Once plugged in, on itunes it reconises the phone and has the loading symbol up, but it doesn't loads anything and can't press anything. Anyone know why and how to resolve this?
The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck. -
I was having trouble purchasing candy crush updates (for no apparent reason, as it has been fine previously). I thought perhpas I needed to download some new software and promptly started the IOS 6 update. It installed and then asked me to complete the final few steps by signing in with my apple id. When I try to do that it says "it cannot connect to the server". I have tried turing it off and on and over riding it, but it won't let me do anything at all now on my ipad mini.
Can anyone help? I literally can't function!!!!You can't override it no matter what you do. The device has to connect to the server to complete the iOS update. You could try rebooting the iPad and see if that lets you connect to the server after it starts up.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that will not work, you can try connecting to iTunes on your computer and see if the activation will complete. Sometimes when thes activation issues arise, you end up having to restore the device again, but first things first. Reboot and see what happens. -
When I tried to update to OS6 on my iPad 2, it got as far as "Your iPad was updated successfully. There are just a few more steps to follow, and then you're done!" The Continue bar at the bottom turns blue momentarily, then back to white. Nothing happens. I powered off and back on, still nothing. When I use the "Home" button, it says "Setup incomplete" but won't continue. Any thoughts?
Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!
-
I was backing up my iPhone using iCloud. It stated the update was completed and to select continue. Now I have to choose a Network??? I am with Verizon, not Wi-Fi, even though we have Wi-Fi for my laptop. Selecting other asks for Network Name and Security. I am lost! I cannot get out of it!
Assuming the phone isn't jailbroken, the basic steps (as needed) are:
Restart phone (you already did this)
Reset phone
Restore phone in iTunes using a backup
Restore in iTunes as new, without using a backup
See appendix B of the User Guide for details
http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf
If your phone is jailbroken, this is the most frequent cause of the problems you described. Restoring could permanently brick the phone.
Note that your iOS is old and the current version is 4.2.8. It's odd that it wasn't updated when your activated your phone in iTunes, being that you got it last Friday. -
We are using Windows Server 2012 Standard installed in VMWare / Virtual machine and to access this we use vSphere client and Remote Desktop Connection / service was already enabled and was working fine with User PCs / laptops remote desktop into the server
2012, until it gave an error message of: Remote session was disconnected because there are no remote desktop license servers available to provide a license. Please contact the server administrator. whilst logging into the server.
We DON'T use Active Directory nor and we don't use domain and not looking to use it any-time soon.
I checked the RD Licensing Diagnoser and it says the grace period has expired and the licensing mode for the remote desktop session host server is not configured. I have checked the Remote Desktop Gateway has been stopped and I tried to start it and it
resumed to stop, here I assume its where the licensing part comes in to re-enabled this.
I have been trying to follow these articles online: http://ryanmangansitblog.com/2013/03/27/deploying-remote-desktop-gateway-rds-2012/ and http://www.concurrency.com/blog/rds8-add-a-licensing-server-2/#Install the overview part that I cannot get into,
because I think we have to be is AD DS for this which we don't. Is there a way around this for non domain / just standalone set-up? Is it a must / requirement we need to be in a domain in order for Remote Desktop Connection to work?
Also, we have a Windows Server 2012 RDS CALs - 10 (software and licence key), will the licence key work for the Windows 2012 Server Standard? We do not want to install the other Server mentioned which comes with CAL / licence key as its time consuming
to reinstall other programs. I have installed Server role service of Remote Desktop Licencing and automatically installed other associated services needed. in the RD Licencing Manager, the Server had a red cross and I "Activate Server"
where I followed: http://www.concurrency.com/blog/rds8-add-a-licensing-server-2/#Install in Install Licences section and I have used the licence key of CAL - 10 mentioned above; it stated I have successfully completed the install licences wizard and displayed:
10 Windows Server 2012 - RDS Per User CAL installed, and in the RD Licensing Manager the server turned into a green tick and added the licence.
I then tested the Remote desktop connection from my PC and the same error message was there and checked the RD Licensing Diagnoser and the same error messages was there. I haven't restart the services of Remote Gateway / the server itself; do I really
need to reboot server?
Any advice / guidance would be very much appreciated and this is a urgent matter.
Thank you for your time.Hotfix Released here:
http://support.microsoft.com/kb/2916846 -
I am the Server Administrator and have server 2012 Standard running on a single computer for our small (50 employee) company. It's primary role is to house one software application that manages our data. Our employees need to remotely access this
server to use this software program. For the last 4 months we have successfully done that using Remote Desktop.
Unfortunately our RDS trial period ran out on our Server, and so I have recently installed 21 RDS User CALs on to the server to still be able to access this server remotely. When I installed them, using the Install Wizard, I selected 'User CALs' as that
is what they are. However, when I try to use remote desktop and access the server remotely, I get the message: "remote session was disconnected because there are no remote desktop license servers available to provide a license"
Do I have to install the RDS User CALs as Device CALs instead even though they are USER CALs?? Did I forget to check a box or something? Please help! We are a Non-Profit and really can't afford Microsoft's $260 support fee when I have a feeling
this has got to be an easy solution.Hi,
1. Did you create an RDS deployment or just install the RD Session Host and RD Licensing Role Services on your server?
2. If yes to #1, have you set the licensing mode and licensing server name in Server Manager -- RDS -- Overview -- Tasks -- Edit Deployment Properties -- RD Licensing tab? Did you make your RDSH server part of a collection? The RDSH server must
be part of a collection in order for the deployment settings to apply.
3. If no to #1, then please set the licensing mode/specify the licensing server name via group policy setting. For example, you could use gpedit.msc and configure the following settings:
Computer Configuration\ Administrative Templates\ Windows Components\ Remote Desktop Services\ Remote Desktop Session Host\ Licensing
Use the specified Remote Desktop licensing servers
Set the Remote Desktop licensing mode
Thanks.
-TP -
Dears,
I have two windows server 2012 Data Center and I configured (Virtual Desktop Interface)VDI on it's.
All my clients connected on both of servers by used Remote Desktop sessions ,5 months since.
Currently,when the clients is connected on the both of servers they received the following error:
"The remote session was disconnected because there are no remote desktop license servers available to provide license"
Kindly note, I installed windows Licenses Server Data Center on the both of servers.
Regards.Hi,
Please let us know if you have purchased RDS CALs and install it in your RD licensing server.
Also, on RD Session host servers, please make sure that you have specified the license mode and point them to the RD licensing server.
Remote Desktop Services Client Access Licenses (RDS CALs)
http://technet.microsoft.com/en-us/library/cc753650.aspx
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
Hope this helps.
Jeremy Wu
TechNet Community Support -
I need to recover deleted data from my iPhone 4S but don't have a recent backup. I thought by pressing sync on my macbook this would back up…but I was wrong. There are no backups on my macbook and the latest backup on iCloud was Jan 2012. My mum died in May and I had lots of text messages that I wanted to keep. I really want to get them back. Is there any way at all I can get that deleted data from the phone?
Since it has always been very basic to backup your computer and all it's data, Apple provides no way for you to transfer music from your iPhone back to your computer. As you know, you can re-download all iTunes purchases, but music that you ripped yourself you'll have to just re-rip again.
You can try and find 3rd party applications that might help you. I'm sure you'll pay, however.
Let this be a very important lesson learned.
Best. -
Hello. When I connect my iPad, to my PC, there are 3gb taken up by "other". How can I free this up? Thanks.
Hi Westindiandiva,
Depending on your current configuration, a certain amount of storage marked as Other on your iPad may be normal. For more information about managing storage on your iOS device, you may find the following article helpful:
See how much storage you've used on your iPhone, iPad, and iPod touch - Apple Support
Regards,
- Brenden -
Every time I synch my iPad I am told there are purchases to transfer. These are the same books that are transferred every time.
"Motion 5" is your friend.
Michael Wohl has a nice 15 video series (free) about Motion 5 at http://www.macprovideo.com/tutorial/motion5101-overview-and-workflow-guide (right side)
This is a "teaser" series to sell his tutorials but it is really good. Just saw it yesterday for the first time.
While all you want is just to place pins, realize that Motion has so much more. All kinds of effects and they can be really customized. Maybe put their street address, contact name, and phone number by the pin?
Motion 5: cheap at $49.99 (just got my download two days ago)
Motion 5: Support Community athttps://discussions.apple.com/community/professional_applications/motion_5
If you're using the map for, say, deliveries, and use an iPad, what you could do is have a general map of the area imported into Motion, create the pins and whatever, then save (share?) it to the iPad.
Disclaimer: I have virtually no relationship with anything connected with this tutorial product, developer, or anything. -
My iphone and ipad share "notes," but there are many duplicates of several notes which makes it hard to use. Is there a solution to these duplicates?? I am backing both up to the icloud. Help!
MarkHello Karen
Check out the quoted section below to see if you any subject line is causing the issue of them not syncing.
iOS: Syncing Notes
http://support.apple.com/kb/HT4191
Unable to sync notes with Outlook
If notes are not syncing from Outlook, verify that you don't have any notes with no content or subject in Outlook. These notes can prevent Outlook from syncing as expected; removing them or adding a subject should allow syncing to resume
Regards,
-Norm G. -
i installed LR 4 on apple lap top os x 10.7. since i was afraid to lose pics i first loaded into i-photo an then exported into LR on a previously opened catalog. for each new export procedure was repeated. now there are plenty of catalogs and LR cannot find some in LR. what now? answer in german or english. hobbymaler
i installed LR 4 on apple lap top os x 10.7. since i was afraid to lose pics i first loaded into i-photo an then exported into LR on a previously opened catalog. for each new export procedure was repeated. now there are plenty of catalogs and LR cannot find some in LR. what now? answer in german or english. hobbymaler
-
Is the iPad ever going to allow Flash to be installed?
Kilby,
Operating iPads in elementary schools, we've discovered a few ways around the 'no Flash' issue, and they're primarily cloud-based solutions:
Rover (a free app, on iTunes). Discovery Learning provides this app as a way for their client schools to access Discovery's libraries of flash-based interactive content. Works on other sites containing Flash as well.
Remote desktop apps: control to your Mac/PC from your iPad and view desired Flash content that way. I like 'SplashTop' (http://www.splashtop.com/remote) for its relatively easy configuration and good on-screen controls from the iPad.
More 'enterprise' solutions: Windows Remote Desktop -- try 'iTap Mobile RDP' app (iTunes) on your iPad to log into your Windows account at work. You get your full PC and all your files at your finger tips on your iPad.
Look for online subscriptions that offer HTML5 support (plays in Safari).
Then there's "OnLive Desktop", a cloud-based computing service (free or 'Plus') you can access via iPad. @Pogue recently wrote about it (NYTImes Feb 22, 2012: 'Windows on the iPad, and Speedy').
Stepping back a little, I think some of the iPad's popularity is due to how effective it is at slacking off. It's energy efficient, connected, and fun to use--while enjoying the computations of other 'real' computers. Still, it can be a pain in the @ when there's 'heavy lifting' to do.
Maybe you are looking for
-
I often download tv shows on apple tv. All of a sudden, my screen does not display download options for tv shows. I can download movies no problem and the Internet connection is good. It just no longer shows options for tv shows except for my tv shoe
-
Will iTunes 10.4 upgrade (Lion 64 bit ver) Not Work With External Drives Any More?
Since i upgraded my MacBook Pro to Lion today, itunes just cannot play anything without going in to to meltdown. Even short tracks stop and stutter, and movies and TV programs are a no go. All I get is the dreaded spinning beach ball. My library is
-
Looking for a reference manual that actually describes in detail all attributes for a command
I am using CS5. I am teaching myself Photoshop using their book, "Classroom in a book". Thought the lessons, they will suggest specific setting for command attributes without describing exacting what these values mean.. For example, on page 88 they g
-
How to cut/split MPEG4 video in my program?
Hi, I am finding for a Java API function, I need this function can cut a segment of MPEG4 Video from a big whole MPEG4 video, and I can set the start time and the end time of cutting video,such as : "cutVideo(startTime,endtime)", for example,the valu
-
Release tab at release PO indicator
Hi Guys, I'm wondering what is the purpose of release tab (tick / untick) at release PO indicator? Thx in advance