HT201232 os x server 3.2.2 and yosemeti

I have a mid-2013 13" macbook air with 1.7GHZ intel 5000 gnu cpu, 8GB RAM, 128GB flash drive.
Now when I had mavericks installed in April 2014 I bought os x server 3.1.1. It worked fine then.
I upgraded to os x yosemite beta when it was offered by apple before release, thats when server
stopped working. Server 3.2.2 came out when yosemite release edition came out claiming
compatibility with os x 10.10, but server still doesn't work. I can't even reinstall it on my macbook
air because the server 3.2.2 app I bought 6 months ago says something about unable to install
because the os is to new.

thanks for the reply Mr. Kappy.
Just asking, why does os x server say it is compatible with os x yosemite?
check out the link to the mac app store for yourself at: OS X Server 3.2.2 - https://macappsto.re/us/zlYLQ.m

Similar Messages

Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding [and I'm at my wit's end!]

I originally posted this question to the community section and was advised to post it here. Please bear with me as this will be a long post. I'm including the scenarios involving this reoccurring issue, the trouble shooting steps I've already
taken and the results of several diagnostic tools and logs.
I have a Sony VAIOS VPCEBB33FM lap top since 2011. I have had this issue on an off for a long time. I'm at my wit's end. Any new insights or suggestions would be greatly appreciated.
Scenario Details
1) Some times it's on and off through out the day, sometimes it won't work all day, and once in a while it will work fine for the entire day.
2) I've had this issue across several wireless services, Clear Network accessed with WiMax, Library Wi-fi, Comcast cable internet using wireless router and Wi-fi, and Comcast Xfinity Wi-Fi, to name a few examples.
3) Other devices in the household or library will work with no problems such as my smart phone or my roommates' laptops or desktop computers.
4) Once in a while, the built-in wireless adapter is not found and I have to reinstall the driver. Also the diagnostic tool has had to reset my adapter on an increasing basis.
5) I had my hard drive replaced in December 2014 and my system restored from the System Restore disks that came with it when I bought the laptop. Even though I've been online on an infrequent basis it worked just fine for a while. Now that
I've been online a bit more I'm having the same issues again.
Below are my attempts at trouble shooting so far but I still have not been able to consistently resolve my DNS issues
1) Restarting my adapter
2) Turning off my laptop and removing the power supply for 5-10 minutes before turning it back on.
3) Using the IP Config in Command Prompt
     ipconfig /flushdns
   ipconfig /registerdns
   ipconfig /release
     ipconfig /renew
4) Using the NetSh reset in Command Prompt and restarting my laptop
     netsh int ip reset c:\resetlog.txt
     netsh winsock reset
     ipconfig /flushdns
     [restart laptop]
5) Configuring the TCP/IP in several settings
    Select Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
    I have used the following settings:
       a) Obtain an DNS server address automatically
       b) OpenDNS
           208 67 222 222
           208 67 220 220
       c) Google DNS
           8 8 8 8
           8 8 4 4
6) Updating the driver for my Intel Centrino(R) Advanced-N 6250 AGN and Intel Centrino(R) WIMAX 6250 from the Intel website previous having my laptop wiped clean in 2014. It still did not resolve the issue. My laptop
manufacturer as not come up with an driver update for my adapter since 2010. I haven't tried to update the adapter driver from Intel's website since having my laptop repaired due to the fact that Intel strongly recommending using the manufacturer's updates
instead and frankly it didn't make much of a difference when I did it the first time.
7) The last one I've tried as of today is going into Services and changing the start up type to automatic for the following:
       Computer Browser [changed from manual to automatic]
       DHCP Client [already set to automatic]
       DNS Client [already set to automatic]
       Network Connections [already set to automatic]
       Network Location Awareness [changed from manual to automatic]
       Remote Procedure Call (RPC) [already set to automatic]
       Server [already set to automatic]
       TCP/IP Netbios helper [already set to automatic]
       Workstation [already set to automatic]
...and I'm still having DNS issues.
My only guessing are that my laptop came with a lemon adapter that needs to be replaced, some advanced setting(s) that I'm not aware off, or my firewall/anti-virus is interfering. I've used Symmantic Anti-virus and Firewall in the past and currently
Avast Anti-Virus with Microsoft Network Firewall. I've had DNS issues with both anti-virus/firewall set ups.
Below are the results from the diagnostics and tests that I've ran.
Windows Network Diagnostics
Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding Detected Detected
Contact your network administrator or Internet service provider (ISP) Completed
Windows can't communicate with the device or resource (DNS server). The computer or service you are trying to reach might be...
Details about network adapter diagnosis:
Network adapter Wireless Network Connection driver information:
   Description . . . . . . . . . . : Intel(R) Centrino(R) Advanced-N 6250 AGN
   Manufacturer . . . . . . . . . : Intel Corporation
   Provider . . . . . . . . . . . : Intel
   Version   . . . . . . . . . . . : 13.2.1.5
   Inf File Name . . . . . . . . . : C:\Windows\INF\oem17.inf
   Inf File Date . . . . . . . . . : Monday, June 14, 2010 9:05:44 AM
   Section Name . . . . . . . . . : Install_MPCIEX_GEN_6250_AGN_2x2_HMC_WIN7_64_MOW
   Hardware ID . . . . . . . . . . : pci\ven_8086&dev_0087&subsys_13018086
   Instance Status Flags . . . . . : 0x180200a
   Device Manager Status Code . . : 0
   IfType . . . . . . . . . . . . : 71
   Physical Media Type . . . . . . : 9
Informational Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
Information for connection being diagnosed
Interface GUID: 70a0781d-6329-45e4-8d7c-34aeca294c39
Interface name: Intel(R) Centrino(R) Advanced-N 6250 AGN
Interface type: Native WiFi
Connection incident diagnosed
Auto Configuration ID: 1
Connection ID: 1
Connection status summary
Connection started at: 2015-03-07 19:57:14-186
Profile match: Success
Pre-Association: Success
Association: Success
Security and Authentication: Success
List of visible access point(s): 22 item(s) total, 22 item(s) displayed
        BSSID       BSS Type PHY   Signal(dB)   Chnl/freq    SSID
60-02-92-C6-D3-E8   Infra   <unknown>   -62       11   HOME-C7D4-2.4
60-02-92-A1-75-E0   Infra   <unknown>   -58       6   HOME-B917-2.4
00-1D-D5-D5-34-F0   Infra   <unknown>   -73       6   HOME-34F2
60-02-92-A1-75-E1   Infra   <unknown>   -58       6   (Unnamed Network)
06-1D-D5-D5-34-F0   Infra   <unknown>   -78       6   xfinitywifi
C4-27-95-C9-C4-2D   Infra   <unknown>   -57       1   HOME-C42D
02-1D-D5-D5-34-F0   Infra   <unknown>   -74       6   (Unnamed Network)
00-0D-97-07-E0-79   Infra   g   -75       6   (Unnamed Network)
00-1D-CF-2A-44-C0   Infra   <unknown>   -86       6   HOME-44C2
02-1D-CF-2A-44-C0   Infra   <unknown>   -86       6   (Unnamed Network)
F8-E4-FB-3C-87-A2   Infra   <unknown>   -89       6   YVNM7
06-1D-CF-2A-44-C0   Infra   <unknown>   -87       6   xfinitywifi
0C-F8-93-7A-13-50   Infra   b   -87       6   PKennedy
06-F8-93-7A-13-50   Infra   b   -89       6   xfinitywifi
02-F8-93-7A-13-50   Infra   b   -87       6   (Unnamed Network)
E0-88-5D-C8-A9-DC   Infra   <unknown>   -80       1   HOME-A9DC
E2-88-5D-C8-A9-DD   Infra   <unknown>   -79       1   (Unnamed Network)
16-CF-E2-43-0B-30   Infra   <unknown>   -88       1   xfinitywifi
60-02-92-F0-A8-C0   Infra   <unknown>   -90       11   HOME-96A6-2.4
60-02-92-C6-D3-E9   Infra   <unknown>   -63       11   (Unnamed Network)
02-1D-D4-EB-87-00   Infra   <unknown>   -88       11   (Unnamed Network)
06-1D-D4-EB-87-00   Infra   <unknown>   -88       11   xfinitywifi
Connection History
Information for Auto Configuration ID 1
List of visible networks: 13 item(s) total, 13 item(s) displayed
BSS Type PHY   Security   Signal(RSSI)   Compatible   SSID
Infra   <unknown>   Yes       63   Yes       HOME-C7D4-2.4
Infra   <unknown>   Yes       70   Yes       HOME-B917-2.4
Infra   <unknown>   Yes       43   Yes       HOME-34F2
Infra   <unknown>   Yes       70   Yes       (Unnamed Network)
Infra   <unknown>   No       40   Yes       xfinitywifi
Infra   <unknown>   Yes       71   Yes       HOME-C42D
Infra   g   No       43   Yes       (Unnamed Network)
Infra   <unknown>   Yes       28   Yes       HOME-44C2
Infra   <unknown>   Yes       20   Yes       YVNM7
Infra   b   Yes       21   Yes       PKennedy
Infra   <unknown>   Yes       33   Yes       HOME-A9DC
Infra   <unknown>   Yes       35   Yes       (Unnamed Network)
Infra   <unknown>   Yes       16   Yes       HOME-96A6-2.4
List of preferred networks: 3 item(s)
   Profile: xfinitywifi
    SSID: xfinitywifi
    SSID length: 11
    Connection mode: Infra
    Security: No
    Set by group policy: No
    Connect even if network is not broadcasting: No
    Connectable: Yes
   Profile: HTC Portable Hotspot 9F50
    SSID: HTC Portable Hotspot 9F50
    SSID length: 25
    Connection mode: Infra
    Security: Yes
    Set by group policy: No
    Connect even if network is not broadcasting: No
    Connectable: No
     Reason: 0x00028002
   Profile: belkin.332
    SSID: belkin.332
    SSID length: 10
    Connection mode: Infra
    Security: Yes
    Set by group policy: No
    Connect even if network is not broadcasting: No
    Connectable: No
     Reason: 0x00028002
Information for Connection ID 1
Connection started at: 2015-03-07 19:57:14-186
Auto Configuration ID: 1
Profile: xfinitywifi
SSID: xfinitywifi
SSID length: 11
Connection mode: Infra
Security: No
Pre-Association and Association
   Connectivity settings provided by hardware manufacturer (IHV): No
   Security settings provided by hardware manufacturer (IHV): No
   Profile matches network requirements: Success
   Pre-association status: Success
   Association status: Success
    Last AP: 06-1d-d5-d5-34-f0
Security and Authentication
   Configured security type: Open
   Configured encryption type: None
   802.1X protocol: No
   Key exchange initiated: Yes
    Unicast key received: No
    Multicast key received: No
   Number of security packets received: 0
   Number of security packets sent: 0
   Security attempt status: Success
Connectivity
   Packet statistics
    Ndis Rx: 2068
    Ndis Tx: 2543
    Unicast decrypt success: 0
    Multicast decrypt success: 0
    Unicast decrypt failure: 0
    Multicast decrypt failure: 0
    Rx success: 3954
    Rx failure: 0
    Tx success: 537
    Tx failure: 4
    Tx retry: 2
    Tx multiple retry: 2
    Tx max lifetime exceeded: 0
    Tx ACK failure: 18
   Roaming history: 0 item(s)
InformationalDiagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Auto Configuration
Initialize status: Success
Information for connection being diagnosed
Interface GUID: 70a0781d-6329-45e4-8d7c-34aeca294c39
Interface name: Intel(R) Centrino(R) Advanced-N 6250 AGN
Interface type: Native WiFi
Result of diagnosis: There may be problem
Network Connection details from Command Prompt (some info hidden for security reasons)
Connection-specific DNS Suffix:
Description: Intel(R) Centrino(R) Advanced-N 6250 AGN
Physical Address: ‎00-23-15-54-19-B8
DHCP Enabled: Yes
IPv4 Address: 192.168.X.XX
IPv4 Subnet Mask: 255.255.XX.X
Lease Obtained: Saturday, March 07, 2015 7:57:14 PM
Lease Expires: Saturday, March 07, 2015 8:24:44 PM
IPv4 Default Gateway: 192.168.X.X
IPv4 DHCP Server: 192.168.X.X
IPv4 DNS Servers: 75.75.75.75, 75.75.76.76
IPv4 WINS Server:
NetBIOS over Tcpip Enabled: Yes
Link-local IPv6 Address: fe80::b8de:3ac9:e166:XXX%XX
IPv6 Default Gateway:
IPv6 DNS Server:
Results of Ping and Trace Route in Command Prompt
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>ping 127.0.0.1
Pinging 127.0.0.1 with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Ping statistics for 127.0.0.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Windows\system32>ping www.youtube.com
Pinging youtube-ui.l.google.com [173.194.121.6] with 32 bytes of data:
Reply from 173.194.121.6: bytes=32 time=24ms TTL=55
Reply from 173.194.121.6: bytes=32 time=19ms TTL=55
Request timed out.
Request timed out.
Ping statistics for 173.194.121.6:
    Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),
Approximate round trip times in milli-seconds:
    Minimum = 19ms, Maximum = 24ms, Average = 21ms
C:\Windows\system32>ping 74.125.239.34
Pinging 74.125.239.34 with 32 bytes of data:
Request timed out.
Request timed out.
Reply from 74.125.239.34: bytes=32 time=3286ms TTL=50
Request timed out.
Ping statistics for 74.125.239.34:
    Packets: Sent = 4, Received = 1, Lost = 3 (75% loss),
Approximate round trip times in milli-seconds:
    Minimum = 3286ms, Maximum = 3286ms, Average = 3286ms
C:\Windows\system32>ping www.hotmail.com
Pinging dispatch.kahuna.glbdns2.microsoft.com [65.55.157.204] with 32 bytes of data:
Reply from 65.55.157.204: bytes=32 time=111ms TTL=237
Request timed out.
Request timed out.
Reply from 65.55.157.204: bytes=32 time=1537ms TTL=237
Ping statistics for 65.55.157.204:
    Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),
Approximate round trip times in milli-seconds:
    Minimum = 111ms, Maximum = 1537ms, Average = 824ms
C:\Windows\system32>ping 207.46.11.236
Pinging 207.46.11.236 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 207.46.11.236:
    Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
C:\Windows\system32>tracert www.youtube.com
Tracing route to youtube-ui.l.google.com [173.194.121.5]
over a maximum of 30 hops:
1    19 ms    13 ms    17 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2    13 ms    13 ms    27 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net [68.85.192.205]
3    20 ms    26 ms    21 ms he-5-10-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.94.249]
4    18 ms    34 ms    22 ms he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
5    19 ms    18 ms    18 ms 50-248-116-190-static.hfc.comcastbusiness.net [50.248.116.190]
6    35 ms    18 ms    18 ms 209.85.249.217
7    21 ms    19 ms    19 ms 72.14.233.93
8     *        *        *     Request timed out.
9     *     2509 ms   677 ms iad23s25-in-f5.1e100.net [173.194.121.5]
Trace complete.
C:\Windows\system32>tracert 74.125.239.34
Tracing route to nuq04s19-in-f2.1e100.net [74.125.239.34]
over a maximum of 30 hops:
1    54 ms    23 ms    12 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2    22 ms    19 ms    17 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
3    19 ms    19 ms    18 ms he-5-14-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.166.121]
4    18 ms    18 ms    18 ms he-0-15-0-0-cr01.350ecermak.il.ibone.comcast.net[68.86.85.74]
5    19 ms    18 ms    22 ms 50-248-116-190-static.hfc.comcastbusiness.net [50.248.116.190]
6    22 ms    36 ms    19 ms 209.85.249.217
7    26 ms    23 ms    25 ms 209.85.143.112
8     *        *        *     Request timed out.
9     *        *        *     Request timed out.
10   972 ms     *        *     216.239.51.97
11   148 ms    97 ms    95 ms 216.239.46.241
12   324 ms   130 ms   432 ms 209.85.246.252
13     *        *        *     Request timed out.
14 1403 ms   101 ms   126 ms nuq04s19-in-f2.1e100.net [74.125.239.34]
Trace complete.
C:\Windows\system32>tracert www.hotmail.com
Tracing route to dispatch.kahuna.glbdns2.microsoft.com [65.55.157.144]
over a maximum of 30 hops:
1    13 ms    13 ms    25 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2    13 ms    15 ms    13 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
3    20 ms    19 ms    17 ms he-5-13-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.95.145]
4    17 ms    20 ms    20 ms he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
5    17 ms    18 ms    38 ms as8075-2-c.ashburn.va.ibone.comcast.net [173.167.58.82]
6    18 ms    18 ms    36 ms ae4-0.ash-96cbe-1a.ntwk.msn.net [207.46.36.172]
7     *        *        *     Request timed out.
8     *     2191 ms    35 ms ae0-0.atb-96cbe-1b.ntwk.msn.net [191.234.81.167]
9     *        *        *     Request timed out.
10     *        *        *     Request timed out.
11    86 ms    84 ms    84 ms ae4-0.lax-96cbe-1a.ntwk.msn.net [191.234.83.150]
12    86 ms    86 ms    87 ms ae9-0.by2-96c-1a.ntwk.msn.net [207.46.42.176]
13     *        *        *     Request timed out.
14     *        *        *     Request timed out.
15     *        *        *     Request timed out.
16     *        *        *     Request timed out.
17    87 ms    84 ms    85 ms origin.by173w.bay173.mail.live.com [65.55.157.144]
Trace complete.
C:\Users\C.Cunningham>tracert 207.46.11.236
Tracing route to origin.by181w.bay181.mail.live.com [207.46.11.236]
over a maximum of 30 hops:
1    16 ms    16 ms    19 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2    18 ms    13 ms    13 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
3    21 ms    19 ms    21 ms he-5-12-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.95.141]
4    18 ms    21 ms    18 ms he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
5     *        *        *     Request timed out.
6     *        *        *     Request timed out.
7     *        *        *     Request timed out.
8     *        *        *     Request timed out.
9     *        *        *     Request timed out.
10     *        *        *     Request timed out.
11     *        *        *     Request timed out.
12     *        *        *     Request timed out.
13     *        *        *     Request timed out.
14     *        *        *     Request timed out.
15     *        *        *     Request timed out.
16     *        *        *     Request timed out.
17     *        *        *     Request timed out.
18     *        *        *     Request timed out.
19     *        *        *     Request timed out.
20     *        *        *     Request timed out.
21     *        *        *     Request timed out.
22     *        *        *     Request timed out.
23     *        *        *     Request timed out.
24     *        *        *     Request timed out.
25     *        *        *     Request timed out.
26     *        *        *     Request timed out.
27     *        *        *     Request timed out.
28     *        *        *     Request timed out.
29     *        *        *     Request timed out.
30     *        *        *     Request timed out.
Trace complete.
Results of Intel WiFi Manual Diagnostics
Test Name                 Test Result   Test Summary
Hardware Test           Passed        Wireless Hardware is enabled
Driver Test           Passed        Diver is loaded. NETwNs64 Version 13.3.0.24
Radio Test                  Passed       Radio is ON
Scan Test                   Passed       There are 25 Networks available to connect
Association Test        Passed       Associated
Authentication Test   Passed       Authenticated
Signal Test                Passed       Signal Quality: Poor
Ping Test                  Failed          No Reponse: default gateway, DHCP server
I hope this information is enough to get to the root of this problem once and for all. Please let me know if you any other information such as event logs or statistics.
Thanks in advance.

Results of Intel WiFi Event View Log (I deleted some lines since there were basically repeats of the same messages)
#Event Source Time
Error Severity    Domain
User      Description
45           EvtEngine
3/8/2015 20:40 Success
Connection         SYSTEM
iAMT - Failed to read Windows Events Log
46           S24EvMon
3/8/2015 20:41 Information
AppDriver
SYSTEM
Getting List of adapters.
47           S24EvMon
3/8/2015 20:41 Information
AppDriver
SYSTEM
Intel adapter(s) found.
156         S24EvMon
3/8/2015 20:47 Information
Driver    SYSTEM
AddToExclude 06:1d:d5:d5:34:f0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_AUTH_FAILURE
157         S24EvMon
3/8/2015 20:47 Information
Driver    SYSTEM
ATC 06:1d:cf:2a:44:c0 xfinitywifi 6 RSSI=-88
158         S24EvMon
3/8/2015 20:47 Error
Driver    SYSTEM
AssociationFailure 06:1d:cf:2a:44:c0 xfinitywifi 6 CNCT_GENERAL_FAILURE
159         S24EvMon
3/8/2015 20:47 Information
Driver    SYSTEM
AddToExclude 06:1d:cf:2a:44:c0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
160         S24EvMon
3/8/2015 20:47 Information
Driver    SYSTEM
ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-79
161         S24EvMon
3/8/2015 20:47 Success
Driver    SYSTEM
RxAuthSuccess 06:1d:d5:d5:34:f0 6
162         S24EvMon
3/8/2015 20:47 Success
Driver    SYSTEM
RxAssocResp 06:1d:d5:d5:34:f0 6 -77
163         S24EvMon
3/8/2015 20:49 Information
TCP/IP SYSTEM
VoIP: Got link down - deleting flows .
164         S24EvMon
3/8/2015 20:49 Information
Driver    SYSTEM
ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-88
165         S24EvMon
3/8/2015 20:49 Error
Driver    SYSTEM
AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
166         S24EvMon
3/8/2015 20:49 Information
Driver    SYSTEM
AddToExclude 06:1d:d4:eb:87:00 xfinitywifi 11 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
167         S24EvMon
3/8/2015 20:49 Information
Driver    SYSTEM
ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-89
168         S24EvMon
3/8/2015 20:49 Error
Driver    SYSTEM
AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
169         S24EvMon
3/8/2015 20:49 Information
Driver    SYSTEM
AddToExclude 06:1d:d4:eb:87:00 xfinitywifi 11 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
170         S24EvMon
3/8/2015 20:49 Information
Driver    SYSTEM
ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-90
171         S24EvMon
3/8/2015 20:49 Error
Driver    SYSTEM
AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
172         S24EvMon
3/8/2015 20:49 Information
Driver    SYSTEM
ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-82
173         S24EvMon
3/8/2015 20:49 Success
Driver    SYSTEM
RxAuthSuccess 06:1d:d5:d5:34:f0 6
174         S24EvMon
3/8/2015 20:49 Success
Driver    SYSTEM
RxAssocResp 06:1d:d5:d5:34:f0 6 -81
175         S24EvMon
3/8/2015 20:50 Information
Driver    SYSTEM
AddToExclude 06:1d:d5:d5:34:f0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_AUTH_FAILURE
176         S24EvMon
3/8/2015 20:50 Information
Driver    SYSTEM
ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-79
177         S24EvMon
3/8/2015 20:50 Success
Driver    SYSTEM
RxAuthSuccess 06:1d:d5:d5:34:f0 6
178         S24EvMon
3/8/2015 20:50 Success
Driver    SYSTEM
RxAssocResp 06:1d:d5:d5:34:f0 6 -80
179         S24EvMon
3/8/2015 21:03 Information
Driver    SYSTEM
RoamTrigger 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-81 MisBcn=8 RSSITh=-85 Roam Other Reason
186         S24EvMon
3/8/2015 21:21 Information
General
SYSTEM
DeviceIoCtrlS24NDIS: (2) Failed to send OID 0xff100055 to driver. Error - 31
187
S24EvMon
3/8/2015 21:21 Information
General
SYSTEM
DeviceIoCtrlS24NDIS - Dot11ExtNicSpecificExtension failed (31)

[Microsoft][SQL Server Native Client 11.0][SQL Server]The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator. 'Items' (OITM) (OITM)

Dear Experts,
i am getting the below error when i was giving * (Star) to view all the items in DB
[Microsoft][SQL Server Native Client 11.0][SQL Server]The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator. 'Items' (OITM) (OITM)
As i was searching individually it is working fine
can any one help me how to find this..
Regards,
Meghanath.S

Dear Nithi Anandham,
i am not having any query while finding all the items in item master data i am giving find mode and in item code i was trying to type *(Star) and enter while typing enter the above issue i was facing..
Regards,
Meghanath

I have partitioned my time capsule, but I can't get it to work as a Time Machine back up and permanent media server for both mac and PC. What format do I need to partition the drive to so that it works for both mac and windows and so that it will be visab

I have partitioned my time capsule, as I want part of it to act as a media server for both mac and windows. However I don't know what format that I need to partition it to. I also can't make it a permanently accesible drive. I want to restore the drive to the original format (which I don't know) and start again and re-partition the drive in a format that can be used for media by both mac and PC and for time machine back-ups and make the media part of it permanetly accesible so I can add and acccess my files.
Thanks

You are mixing up a couple of things here.
The TC drive cannot be partitioned without removing it.. did you do that?
If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC.

Current server is the coordinator and transaction is not found

Hi,
We're using Weblogic 8.1 SP3. We have a single weblogic domain and 2 clusters in it. EAR1 is deployed in cluster 1 and EAR2 is deployed in cluster 2. EAR2 is compiled and created using j2ee.jar and not weblogic.jar.
We have a MessageDrivenBean which is CMT / Required in EAR1 calls a BMT Stateless Session Bean in EAR2.
A new transaction is begun in the BMT SB method and commit or rollback is called based on exception. A RuntimeException is thrown back to the MDB in case the transaction is rolled back in Bean Managed SB.
Sometimes from the Bean Managed SB the following exception is thrown:
javax.transaction.TransactionRolledbackException: Current server is the coordinator and transaction is not found. It was probably rolled back and forgotten already.
     at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
     at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:284)
     at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:244)
     at com.oakgrovesystems.reactor.frontDesk.EJBFrontDeskBean_1gq9kv_EOImpl_813_WLStub.handleRequest(Unknown Source)
     at com.oakgrovesystems.reactor.requests.ReactorRequest.send(ReactorRequest.java:212)
     at com.oakgrovesystems.reactor.client.EJBReactorProxy.sendRequest(EJBReactorProxy.java:44)
     at com.oakgrovesystems.reactor.client.AbstractReactorProxy.handleRequest(AbstractReactorProxy.java:52)
     at sun.reflect.GeneratedMethodAccessor153.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at tavant.bpm.client.proxy.DynamicFailoverReactorProxy.invoke(DynamicFailoverReactorProxy.java:84)
     at $Proxy11.handleRequest(Unknown Source)
     at tavant.bpm.client.ProcessHome.handleRequest(ProcessHome.java:298)
     at tavant.bpm.client.ProcessHome.startProcess(ProcessHome.java:87)
     at tavant.bpm.client.processor.CreateWorkflowInstance.startProcess(CreateWorkflowInstance.java:70)
     at tavant.bpm.client.processor.CreateWorkflowInstance.invoke(CreateWorkflowInstance.java:51)
     at tavant.bpm.ejb.AsynchronousProcessorMessageBean.onMessage(AsynchronousProcessorMessageBean.java:58)
     at weblogic.ejb20.internal.MDListener.execute(MDListener.java:370)
     at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:262)
     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2678)
     at weblogic.jms.client.JMSSession.execute(JMSSession.java:2598)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
This is not consistently reproducible though it happens when server is heavily loaded. When this exception occurs, the transaction in the BMT Session Bean is actually getting committed! The message gets redelivered from the MDB.
What could be the problem?
Regards
Sandhya

I'm seeing a similiar problem on our servers recently and thought I would add my problem as well. We are using Weblogic 8.1; don't know which SP is in production. We have an EAR file with an SB EJB that puts messages in a queue. The EAR is deployed in a cluster along with the queues. The errors below occurred in 3 of the 4 WLS instances in our cluster. This happened during a peak period and lasted for several seconds in Production.
###<Jul 1, 2005 11:18:12 AM EDT> <Warning> <RMI> <exsdxtxeax1x.prod.xxxx.xxx> <ems-04> <ExecuteThread: '12' for queue: 'web
logic.kernel.Default'> <<WLS Kernel>> <> <BEA-080006> <Failed to associate the transaction context with the response while marshall
ing an exception to the client:
javax.transaction.TransactionRolledbackException: Current server is the coordinator and transaction is not found. It was probably
rolled back and forgotten already..
javax.transaction.TransactionRolledbackException: Current server is the coordinator and transaction is not found. It was probably
rolled back and forgotten already.
at weblogic.transaction.internal.TransactionManagerImpl.sendResponse(Ljava.lang.Object;)Ljava.lang.Object;(TransactionManag
erImpl.java:1438)
at weblogic.rmi.internal.BasicServerRef.associateTxContext(Lweblogic.rmi.spi.InboundRequest;Lweblogic.rmi.spi.OutboundRespo
nse;)V(BasicServerRef.java:490)
at weblogic.rmi.internal.BasicServerRef.postInvoke(Lweblogic.rmi.extensions.server.RuntimeMethodDescriptor;Lweblogic.rmi.sp
i.InboundRequest;Lweblogic.rmi.spi.OutboundResponse;Ljava.lang.Throwable;)V(Optimized Method)
at weblogic.rmi.internal.BasicServerRef.handleRequest(Lweblogic.rmi.spi.InboundRequest;)V(Optimized Method)
at weblogic.rmi.internal.BasicExecuteRequest.execute(Lweblogic.kernel.ExecuteThread;)V(Optimized Method)
at weblogic.kernel.ExecuteThread.execute(Lweblogic.kernel.ExecuteRequest;)V(Optimized Method)
at weblogic.kernel.ExecuteThread.run()V(ExecuteThread.java:178)
at java.lang.Thread.startThreadFromVM(Ljava.lang.Thread;)V(Unknown Source)
>

Server 2012 R2 Essentials and Server 2012 Standard

This is for a small business with all of 2 employees. I setup up the domain on the Server 2012 R2 Essentials. We have since found out that one of the applications was over loading the server so he went and bought a different server. Well that server has 2012 Server Standard. I added it to the domain but when I tried to make it a domain controller, I was getting a conflict error with the domain levels. So the question is, what is the best solution to resolve this? My first thought it to just create the domain on the Server 2012 and just blow the old domain. But maybe there is a better way to do it? any ideas?
This topic first appeared in the Spiceworks Community

This is for a small business with all of 2 employees. I setup up the domain on the Server 2012 R2 Essentials. We have since found out that one of the applications was over loading the server so he went and bought a different server. Well that server has 2012 Server Standard. I added it to the domain but when I tried to make it a domain controller, I was getting a conflict error with the domain levels. So the question is, what is the best solution to resolve this? My first thought it to just create the domain on the Server 2012 and just blow the old domain. But maybe there is a better way to do it? any ideas?
This topic first appeared in the Spiceworks Community

How to get rid of automatically created server accounts in iCal and Mail?

I have recently setup an OS X 10.6.2 Server for our small office. I got the domain name wrong in the initial install and fixed this by doing a complete clean reinstall of OS X 10.6 server (then upgrade to 10.6.2).
The problem is that one of the OS X 10.6.2 clients had been setup to talk to the server prior to the rebuild. Now on this client, I cannot work out how to get rid of or change the automatically created server accounts in iCal and Mail - everytime you login, these are recreated using the old domain name (and of course don't work).
In Mail if you remove the server account (from Accounts in Preferences), it just pops back again. I even removed every trace of the old domain name from the apple.com.mail.plist file but when I re-open Mail that darned server account (with the old domain name) just pops up again.
In iCal its slightly different in that you can remove the account and it stays away while you have iCal open. But as soon as you close and re-open it, that server account just pops up again!
I thought it might be something to do with Kerberos and found a Kerberos file on the client which had the old domain name throughout it - I changed all these references to the new domain name, but still the same behaviour in Mail and iCal.
This is doing my head in. Any ideas?
Message was edited by: davidav

I suggest you ask in the snow leopard server forum
http://discussions.apple.com/category.jspa?categoryID=264

Unable to retrieve clouds on VMM server. Please make sure the server name is correct and try connecting again

I getting this annoying error "Unable to retrieve clouds on VMM server. Please make sure the server name is correct and try connecting again." I've followed the recommended documentation for setting up SPF and Azure using the following:
http://www.hyper-v.nu/archives/mvaneijk/2013/01/installing-and-configuring-system-center-service-provider-foundation/
I've gone thru the troubleshoot steps from the following:
http://blogs.technet.com/b/scvmm/archive/2014/03/04/kb-the-windows-azure-pack-service-management-portal-does-not-retrieve-cloud-settings.aspx
http://social.technet.microsoft.com/forums/windowsazure/en-US/363e7dae-7370-4605-bc8d-b98fa6dc9d8e/unable-to-register-vmm-server
So you don't need to send me those links.
I found a few others which pointed me to the event logs WindowsAzurePack\MGmtSVC-AdminAPi and AdminSite. In these event logs, I see a lot of event ID 12 and 1046. The contents of event id 12 is the following:
Log Name: Microsoft-WindowsAzurePack-MgmtSvc-AdminSite/Operational
Source: Microsoft-WindowsAzurePack-MgmtSvc-AdminSite
Date: 6/19/2014 3:27:55 PM
Event ID: 12
Task Category: (65522)
Level: Error
Keywords: None
User: IIS APPPOOL\MgmtSvc-AdminSite
Computer: usw-azure-01.uswired.com
Description:
Error:ManagementClientException: Resource not found.
<Exception>
<Type>ManagementClientException</Type>
<Message>Resource not found.</Message>
<StackTrace><![CDATA[
at Microsoft.WindowsAzure.Server.Management.ManagementClientBase.<ThrowIfResponseNotSuccessful>d__2b.MoveNext()
at Microsoft.WindowsAzure.Management.TaskSequencer.<>c__DisplayClass1e`1.<RunSequenceAsync>b__1d(Task previousTask)
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.WindowsAzure.Server.SystemCenter.AdminExtension.Controllers.SystemCenterAdminController.<GetResourceProviderAsync>d__2e7.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.WindowsAzure.Server.SystemCenter.AdminExtension.Controllers.SystemCenterAdminController.<GetAutomationResourceProvider>d__2b6.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at lambda_method(Closure , Task )
at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass3f.<BeginInvokeAsynchronousActionMethod>b__3e(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<>c__DisplayClass2a.<BeginInvokeAction>b__20()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult)]]></StackTrace>
<HttpContext>
<User IsAuthenticated="true" Name="USWIRED\Administrator" />
<Request>
<RawUrl>/SystemCenterAdmin/GetAutomationResourceProvider</RawUrl>
<UserHostAddress>fe80::c179:19c8:c5f2:7309%12</UserHostAddress>
<Headers>
<Header Key="Cache-Control" Value="no-cache" />
<Header Key="Connection" Value="Keep-Alive" />
<Header Key="Content-Length" Value="2" />
<Header Key="Content-Type" Value="application/json" />
<Header Key="Accept" Value="application/json, text/javascript, */*; q=0.01" />
<Header Key="Accept-Encoding" Value="gzip, deflate" />
<Header Key="Accept-Language" Value="en-US" />
<Header Key="Host" Value="usw-azure-01.uswired.com:30091" />
<Header Key="Referer" Value="https://usw-azure-01.uswired.com:30091/" />
<Header Key="User-Agent" Value="Mozilla/5.0 (Windows NT 6.3; WOW64; Trident/7.0; rv:11.0) like Gecko" />
<Header Key="x-ms-client-session-id" Value="c343c29d-20b1-412b-be94-879409205700" />
<Header Key="x-ms-client-antiforgery-id" Value="0crwi2qNk20bMr6C04/vKd4L28WG1nd8JKBdOlCCp+xlph40YeL2oTdmeiTkPmE272S2dqmGQMNo+FElKkG2MdR0Xhq41RU/t8PrFjcG0Vgx4a8dgZLbfKVURo9n84F1XWtJOkTTUK/OeNVWBrK1+w=="
/>
<Header Key="x-ms-client-request-id" Value="dcc427c7-40fc-4fdd-9a70-7622969ff40d-2014-06-19 22:27:55Z" />
<Header Key="X-Requested-With" Value="XMLHttpRequest" />
<Header Key="DNT" Value="1" />
<Cookies>
<Cookie Name="AdminSiteFedAuth" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (2000 characters)" />
<Cookie Name="AdminSiteFedAuth1" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (424 characters)" />
<Cookie Name="__RequestVerificationToken_Admin" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (128 characters)" />
</Cookies>
</Headers>
</Request>
</HttpContext>
</Exception>, operationName:SystemCenterAdmin.GetAutomationResourceProvider, version:, accept language:en-US, subscription Id:, client request Id:dcc427c7-40fc-4fdd-9a70-7622969ff40d-2014-06-19 22:27:55Z, principal Id:USWIRED\Administrator, page request
Id:c343c29d-20b1-412b-be94-879409205700, server request id:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-WindowsAzurePack-MgmtSvc-AdminSite" Guid="{5E78D550-1384-5A96-C12A-CB6DA7BC6365}" />
<EventID>12</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>65522</Task>
<Opcode>0</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2014-06-19T22:27:55.971935000Z" />
<EventRecordID>399</EventRecordID>
<Correlation ActivityID="{FAA512AF-E0A9-4F2A-80EF-09F72D2F7918}" />
<Execution ProcessID="3424" ThreadID="2308" />
<Channel>Microsoft-WindowsAzurePack-MgmtSvc-AdminSite/Operational</Channel>
<Computer>usw-azure-01.uswired.com</Computer>
<Security UserID="S-1-5-82-4118156790-2181488624-806685255-2797011695-3958995103" />
</System>
<EventData>
<Data Name="message">ManagementClientException: Resource not found.
<Exception>
<Type>ManagementClientException</Type>
<Message>Resource not found.</Message>
<StackTrace><![CDATA[
at Microsoft.WindowsAzure.Server.Management.ManagementClientBase.<ThrowIfResponseNotSuccessful>d__2b.MoveNext()
at Microsoft.WindowsAzure.Management.TaskSequencer.<>c__DisplayClass1e`1.<RunSequenceAsync>b__1d(Task previousTask)
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.WindowsAzure.Server.SystemCenter.AdminExtension.Controllers.SystemCenterAdminController.<GetResourceProviderAsync>d__2e7.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.WindowsAzure.Server.SystemCenter.AdminExtension.Controllers.SystemCenterAdminController.<GetAutomationResourceProvider>d__2b6.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at lambda_method(Closure , Task )
at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass3f.<BeginInvokeAsynchronousActionMethod>b__3e(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<>c__DisplayClass2a.<BeginInvokeAction>b__20()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult)]]></StackTrace>
<HttpContext>
<User IsAuthenticated="true" Name="USWIRED\Administrator" />
<Request>
<RawUrl>/SystemCenterAdmin/GetAutomationResourceProvider</RawUrl>
<UserHostAddress>fe80::c179:19c8:c5f2:7309%12</UserHostAddress>
<Headers>
<Header Key="Cache-Control" Value="no-cache" />
<Header Key="Connection" Value="Keep-Alive" />
<Header Key="Content-Length" Value="2" />
<Header Key="Content-Type" Value="application/json" />
<Header Key="Accept" Value="application/json, text/javascript, */*; q=0.01" />
<Header Key="Accept-Encoding" Value="gzip, deflate" />
<Header Key="Accept-Language" Value="en-US" />
<Header Key="Host" Value="usw-azure-01.uswired.com:30091" />
<Header Key="Referer" Value="https://usw-azure-01.uswired.com:30091/" />
<Header Key="User-Agent" Value="Mozilla/5.0 (Windows NT 6.3; WOW64; Trident/7.0; rv:11.0) like Gecko" />
<Header Key="x-ms-client-session-id" Value="c343c29d-20b1-412b-be94-879409205700" />
<Header Key="x-ms-client-antiforgery-id" Value="0crwi2qNk20bMr6C04/vKd4L28WG1nd8JKBdOlCCp+xlph40YeL2oTdmeiTkPmE272S2dqmGQMNo+FElKkG2MdR0Xhq41RU/t8PrFjcG0Vgx4a8dgZLbfKVURo9n84F1XWtJOkTTUK/OeNVWBrK1+w=="
/>
<Header Key="x-ms-client-request-id" Value="dcc427c7-40fc-4fdd-9a70-7622969ff40d-2014-06-19 22:27:55Z" />
<Header Key="X-Requested-With" Value="XMLHttpRequest" />
<Header Key="DNT" Value="1" />
<Cookies>
<Cookie Name="AdminSiteFedAuth" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (2000 characters)" />
<Cookie Name="AdminSiteFedAuth1" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (424 characters)" />
<Cookie Name="__RequestVerificationToken_Admin" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (128 characters)" />
</Cookies>
</Headers>
</Request>
</HttpContext>
</Exception></Data>
<Data Name="requestId">
</Data>
<Data Name="subscriptionId">
</Data>
<Data Name="clientRequestId">dcc427c7-40fc-4fdd-9a70-7622969ff40d-2014-06-19 22:27:55Z</Data>
<Data Name="principalId">USWIRED\Administrator</Data>
<Data Name="version">
</Data>
<Data Name="pageRequestId">c343c29d-20b1-412b-be94-879409205700</Data>
<Data Name="acceptLanguage">en-US</Data>
<Data Name="operationName">SystemCenterAdmin.GetAutomationResourceProvider</Data>
</EventData>
</Event>
Event ID 1046 is
Log Name: Microsoft-WindowsAzurePack-MgmtSvc-AdminSite/Operational
Source: Microsoft-WindowsAzurePack-MgmtSvc-AdminSite
Date: 6/19/2014 3:32:56 PM
Event ID: 1046
Task Category: (116)
Level: Error
Keywords: None
User: IIS APPPOOL\MgmtSvc-AdminSite
Computer: usw-azure-01.uswired.com
Description:
Could not connect to Resource Provider. Error: Resource not found.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-WindowsAzurePack-MgmtSvc-AdminSite" Guid="{5E78D550-1384-5A96-C12A-CB6DA7BC6365}" />
<EventID>1046</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>116</Task>
<Opcode>0</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2014-06-19T22:32:56.854137500Z" />
<EventRecordID>413</EventRecordID>
<Correlation ActivityID="{C20DBEAD-388F-4CF4-80FD-21C6419CC2F1}" />
<Execution ProcessID="3424" ThreadID="2768" />
<Channel>Microsoft-WindowsAzurePack-MgmtSvc-AdminSite/Operational</Channel>
<Computer>usw-azure-01.uswired.com</Computer>
<Security UserID="S-1-5-82-4118156790-2181488624-806685255-2797011695-3958995103" />
</System>
<EventData>
<Data Name="errorMessage">Resource not found.</Data>
</EventData>
</Event>
The other thing I notice is that when trying to connect to the VMM. It's trying to use domain\username, yet when I try logging in with domain\username via the SCVMM Console. I get the You cannot access VMM management server (Error ID: 1604).
I'm not sure if this is why I can not add the VMM to WAP. Any help would be appreciated. Thanks
Nick

Hello,
I am not sure about the answer but I guess these steps will solve your problem:
1) Log in to the SPF server by using an account that is a member of the SPF_Admin local group.
2) Open an elevated Windows PowerShell window.
3) Type the following commands, and press Enter after you type each command:
Import-module spfadmin
New-SCSPFTenant -Name Administrator -SubscriptionId 00000000-0000-0000-0000-000000000000
4) Close the WAP Server Management Portal, and then reconnect to it to update all items.

SQL Server Express 2008 R2 and Windows 8.1 (Standard)

I recently re-engineered the backend of a legacy Access 2003 application because we knew that going forward we were going to loose the replication capability in Access. This is a small, departmental app, so the new SQL Server Express 2008 R2 backend is
hosted on a robust Windows 7 system. I tested the implementation with both Windows XP and Windows 7 clients running the updated Access 2003 frontend and everything worked great.
We are now in the midst of a company-wide upgrade to Windows 8.1 and I'm having issues. The legacy frontend works fine with Access 2013 (full version) when run locally on the Win7 machine, but I can't get any of the new Win 8.1 clients to connect to the
SQL database using the Access 2013 Runtime module. I CAN create ODBC connections to SQL Server from the clients and they test successfully, so I think I have a valid SQL connection to the Win 7 box.
To recap: old clients were WinXP Pro with Office 2003 Pro, new clients are Win 8.1 (non-Pro) with Access 2013 Runtime module.
Any ideas?

Hi ,
Glad to hear that you have found the solution. Thank you for coming back and let us know the result:)
Best Regards,
Tracy
Tracy Cai
TechNet Community Support

Linked Server error: Login Failed for user 'NT AUTHORITY\ANONYMOUS LOGON' between sql server 2005 32 bit and sql server 2012 64 bit

Hi All,
Here the linked server is created between sql server 2012 64 bit and sql server 2005 32 bit. I am getting the below error when i try to access linked server from third server. I have created linked from Instance 1 to Instance 2. When i access it from
instance 3 i am getting the below error. SPN setting has been done between these 2 servers. Also the option 'Trust the delegate' is enabled for the both the service account.
'Login Failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
Appreciate your quick response.
Vikas.M.S

Hello,
Please read the following resources:
http://www.databasejournal.com/features/mssql/article.php/3696506/Setting-Up-Delegation-for-Linked-Servers.htm
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ea26de43-4c6b-4991-86d7-e1578f107c92/linked-server-login-failed-for-user-nt-authorityanonymous-logon?forum=sqldataaccess
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Problems with Boot Camp, OSX Lion Server 10.7.3, and Windows 7

My new Mac Mini Server is running OSX Lion Server 10.7.3. I want to install Windows 7 as a dual boot. I start up Boot Camp and use an ISO image to create a USB boot disk. I don't seem to be able to use the DVD to install, so I use an ISO image on disk. I continue with the Boot Camp installation, with all three options on the main screen checked. When I get to the part where I have to pick a partition on which to install, the only one I can select, and must format, is the partition labeled BOOTCAMP. But the Boot Camp support software Windows is installed there. I can continue with the Windows installation, and boot into Windows 7 with no problem. But since the Boot Camp drivers were wiped out, I cannot connect to the network, etc. I don't have a Boot Camp control panel either.I did this once before on my other Mac Mini Server I have, running the same OSX Lion Server 10.7.3, and it worked without a problem. I'm writing this message on that copy of Windows. But this new install just will not work, after two days of trying. I *must* get this working. I'm stumped.
CAN ANYONE HELP ??? TIA !!!!

First, this is re-post of your other thread.
Your driverrs were not and will not be "wiped out."
Run Boot Camp Assistant. Download the drivers
Your profile says Lion so that will let you store drivers on flash memory card.
They are never placed where Boot Camp created a partition.

Is Distributed Transaction Coordinator services of the application role are required by SQL Server 2012 for clustering and support of SharePoint 2013.

All I want to know is if Distributed Transaction Coordinator services of the application role are required by SQL Server 2012 for clustering and support of SharePoint 2013.
I have been planning and deploying my companies first Windows Server 2012/SQL Server 2012 Always On cluster and Always On Availability Groups Multi-Subnet cluster and instances for SharePoint 2013, and I will be brutally honest, the documentation on either
the MSDN and TechNet leave alot to be desired. Continually finding links in the documentation will take me from a Windows 2012 reference to a page talking about Windows Server 2008 or R2, The differences of which there are so many when it comes to configurations,
settings, roles, services when working with SQL Server 2012. I have been confused, frustrated, screaming mad, with all the misdirection in this documentation. The documentation takes me windows 2008 R2 which is different than 2012!
Tired and trying to pick myself up off the floor!
Greg
Gman

In general, DTC is not required for SQL 2012. But, since you are asking specifically about SharePoint, it would be better to ask in a SharePoint forum. They would be more likely to know those situations where FTC might be needed by SharePoint.
.:|:.:|:. tim

Not able to download Weblogic Server 10.3.5 and ATG 10.3.2 for 64 bit window

Hi
For past two days I am trying to download Weblogic Server 10.3.5 and ATG 10.3.2 for 64 bit window but the download stops after downloading 30 or 40 MB and once I got network error. I dont know whats the issue. I even disabled my antivirus and firewall, still no luck. Any help is appreciated.
Thanks.

I hope you are using following link to download the Oracle WebLogic Server 10.3.5
http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html
Oracle recommends to use Download manager. Download Managers can help if you are having trouble connecting, completing a download, or wish to queue up several files for unattended downloading. While Oracle does not provide or certify the use of any Download Managers, we recommend choosing one that is rated for the file size you are downloading and ensuring that it allows cookies to be passed to the download server.
Or you can also request Oracle to ship DVDs, please use following MOS notes to follow the process.
My Oracle Support Doc ID 1071023.1 ‘Requesting Physical Shipment or Download URL for Software Media'.

Hi I have two macbook pro, i connected one from another via lan cable , now when i removed it, its showing me some pop up again and again saying server may not exists and there was a problem connecting to ishan's macbook pro

Hi I have two macbook pro, i connected one from another via lan cable , now when i removed it, its showing me some pop up again and again saying server may not exists and there was a problem connecting to ishan's macbook pro

If you just reboot it, does the problem go away?

Yosemite 10.10.2 server app. FTP help. I have a program running in my local server enviroment that wants to FTP to my mac folder. It asks for the server , name, password, port and path. what are they?

So I have set up a localhost area in my Mac. I have the new server.app and I am running yosemite 10.10.2 .
I have a program running in my local server enviroment that wants to FTP to my mac .
It asks for the server , name, password, port and path. what are they?
I am pretty certain that the Serveris "localhost",
Name is my macs name (like my-mac-min)
password is "my login password"
and they suggest port 21.
But what is the file path, lets just say my site is set up http://localhost/siteftp and is actually at my Users/Sites/siteftp folder.
Why cant this program connect to the mac.
Is it because they are both operating in the same localhost enviroment,
could it be my folder permissions are not correct on siteftp folder?
Help please !

I tried turning the computer off and then back on. The alerts don't show the notice to update as resolved. Hopefully this is not a problem or an indicator or another problem. Should I ignore or reload 10.10.1 from the app store to trigger a resolved check in a green circle?
Interesting that I had to buy server software after my free Yosemite download. I would have hoped that the two pieces of software would have gone together without any complication. It is not positive to end up buying a problem. Ah well, time to move on.

HT201232 os x server 3.2.2 and yosemeti

Similar Messages

Maybe you are looking for