HT201237 Final Cut Pro X 10.0.8 not working under Yosemite

I have Final Cut Pro X 10.0.8 and it stopped working under Yosemite. Are there any fixes or work arounds? Oddly enough, my copy of Final Cut Express 4.01 still works!
MacBook Pro 13" (Late 2011)
12 GB RAM
180 GB Intel 530 SSD

I'm not seeing Final Cut in my purchases on this device ...
However ...
I did change my Apple ID a few times since 2012 (I kept forgetting it and also wanted to consolidate with my other Apple devices ... )
I actually have Final Cut 10.0.8 installed on two computers. I updated Final Cut on the laptop last year to 10.1 .... but KEPT the old FCP version on the desktop because I liked it.
However, since I updated to Yosemite on the desktop last week, Final Cut 10.8 will not open --- and I don't have an "update option" in the App store.
Will this happen on my laptop if I update to Yosemite? That device is running Mountain Lion, I think.  But I would hate to also lose Final Cut 10.1 ... it's all I seem to have left.
Do I have to purchase Final Cut again for both computers? Thanks very much for your help, it is very appreciated!

Similar Messages

  • My Final Cut Pro X Trial Version is not working. Please Help!

    I downloaded the trial version of Final Cut Pro X yesterday (which is a .dmg file) and when i tried to open it, am message pops up saying it's not recognized. I tried duplication the file then repairing it using Utilities.. But it didn't work. Someone please help me.

    i tried that....

  • Final Cut Pro X 10.0.07 not working with Mountain Lion?

    I have just installed Mountain Lion on my computer two weeks ago, and just now I needed to use Final Cut Pro X 10.0.7 to edit a video for a client.
    Every time I open FCPX it doesn't open normally.  It doesn't bring up it's normal purple background, just the wording.  And when it opens and I scroll over a video, it won't bring it up in the viewer.
    When I go to import footage, it opens the import window but it's just a grey screen.
    What can I do?  I need to have FCPX working by tonight!

    Use FCS Remover to trash the app and try reinstalling it.

  • Final Cut Pro X 10.0.9 not working after installing Yosemite

    Final Cut Pro X 10.0.9 is not working with Yosemite I installed today, what do I do?

    UUpdate your software. Only 10.1.3 or 10.1.4 work with Yosemite. Significant changes since your version.

  • Final Cut Pro 7 Serial Number does not work

    After the latest Apple Update my FCP program puts up a requestor box wanting the serial number. When I put the number in the box says Incorrect. I've tried everything like changing 0 to O to copy and pasting and keying in. Nothing works. What did Apple do in the last update to screw up FCP?

    MJBTV wrote:
    After the latest Apple Update my FCP program puts up a requestor box wanting the serial number. When I put the number in the box says Incorrect. I've tried everything like changing 0 to O to copy and pasting and keying in. Nothing works. What did Apple do in the last update to screw up FCP?
    We have see a few related posts, try searching for serial number.
    I assue you, nothing was perpetrated by Apple during the recent ProApp updates. You can usually download them as a stand alone installer instead of getting them as an automatic script.
    This one was issued on September 15, 2010:
    http://support.apple.com/kb/dl949
    other fun stuff:
    http://www.apple.com/downloads/macosx/finalcutstudio/
    bogiesan

  • Final Cut Pro HD 4.5  Will not work with the new dual core dual processors

    Does anyone know of any solutions that will avoice having to purchase the FCP 5.

    Yes...
    #29: Need AGP Graphics card
    Shane's Stock Answer #29
    You either need to either:
    1) use the following hack -
    http://www.xlr8yourmac.com/feedback/finalcut_pro_on_oldmacs.html
    or
    2) Upgrade to FCP 5
    http://docs.info.apple.com/article.html?artnum=302667
    Shane
    "There's no need to fear, UNDERDOG is here!"

  • HT201237 Final Cut Pro 10.2 quitting unexpectedly while using the motionVFXmFlare plug-in.

    Hi guys
    Recently updated to FCPX 10.2 and now it keeps crashing with the error: Final Cut Pro quit unexpectedly while using the motionVFXmFlare plug-in.
    I have contacted motionvfx about this, and I'm awaiting a response, but I thought I'd ask you guys if there's any way to revert to the previous version of the app for now since I can't use it at all right now and it's kind of important.
    Any help would be greatly appreciated.
    Thanks!
    Steve Leach

    hi
    they updated their plugins for use in FCPX 10.2 and Motion 5.2. Boot up the mFlare software and it will prompt you to date.
    adam

  • Preview out in Final Cut Pro 6, doesnt seem to be working

    I have a cilent coming over in a few hours and im having some issues getting the preview out from my computer to my TV to work. I refreshed everything, and its set to "All Frames" but all i seem to be getting is a black screen.

    its DV format, We are running it though a JVC Deck VIA Firewire. It has worked with Final Cut Pro 5 and up but 6 seems to be an issue, Nothing has changed but the software

  • Final Cut Pro 7.03 crashes, impossible to work with the system

    Hi,
    I have a mac pro with the following configuration:
    *2,4 Ghz westmere octa (mac pro 5,1)
    *24Gb Ram in 6x4gb FCM 1066MHz modules
    *DeckLink HD Extreme 3D video card
    *ATI Radeo HD 5770
    *NVIDEO Quattro 4000
    *Tempo Sata e2p esata controller
    I work a lot in final cut pro, but it crashes like every 5 minutes or even faster, sometimes i runs for 10 minutes without a crash. That is terrible and that 10k workstation is not usable...
    I already formatted the harddisk, re set up osx and fcs, installed every update for every part of my workstation but cannot fix it.
    Especially viewing clips as thumbnail galleries (video previews) and working with timelines where you have those little video thumbnails on every cut in the beginning of the clip and scrubbing around there leads to crashes.
    I mostly work on xdcam422 material at 220mbit and 280mbit recorded with the nanoflash, but also in prores422hq.
    Anyone an idea on how to fix this?
    Thanks a lot!

    Hi,
    Here the Maintainance Pack Log:
    This crash log suggests that Final Cut Pro was overloaded at the time of the crash. This can occur if your project is overly complex, has multiple Motion project layers or is using MPEG-based media (HDV, H.264, MPEG-2, XDCAM, AVCHD), particularly if you are using filters with such media. Note that overloading is more likely to be the cause of the crash than the reason below.
    Corrupt / Unsupported Media
    This crash was caused by corrupt media or media that is unsupported by Final Cut Pro. A common cause of this crash is using media on your timeline that is unsuitable for editing such as AVI, WMV or MPEG-derived codecs (XDCAM, HDV, MPEG-2, H.264).
    Suggested Actions
    Use Corrupt Clip Finder to locate the problematic clip and then recapture or attempt to repair it.
    If your sequence codec is set to an MPEG-based codec such as MPEG-2, HDV, XDCAM or H.264, change it to ProRes.
    Alternatively, and for best results, convert any MPEG-based media to ProRes.
    If the issue is related to a codec, upgrade the codec if an upgrade is available or consider transcoding your footage to an editing-friendly codec such as ProRes.
    If you are using CMYK images, convert them to RGB.
    More Information
    To improve the stability of your system, create a less complex "lite" version of your project, export embedded Motion projects as QuickTime movies and if you are using MPEG-based media such as H.264, HDV and XDCAM, set your sequence codec to ProRes or convert the media to the ProRes codec.
    Relevant Line
    0 ...ickTimeComponents.component 0x97395a1c FindAligningPiece + 274

  • Final cut pro x - Title changes are not saved!

    Dear Sirs,
    I have a big project I am working on in Final cut pro x that contains about 300 subtitles (created with the basic title tool), and now when I make text changes to these titles, quit the program and open the project again those changes are gone....!!! This is a serious problem for me, any help concerning this would be greatly appriciated.
    Thank you,
    Oded

    You might not have a compatible video card. It needs to be "OpenCL" compatible. What mac are you using, and what video card? This info is available using the "About this Mac" menu item; click "More Info" to get to the video info.

  • Final Cut Pro 7 crashed and will not open (only gives unusual error)

    Final Cut Pro 7 (from Final Cut Studio 2 installation) crashed sometime yesterday at 8 and any time it was opened it oulde give an error saying that this version of Final Cut wasn't supported by G4 and needed to be upgraded to G5. This is far from true though since it's been working properly and without trouble for about 2 months.
    Also, and I'm not sure if it's related or not, but installer.app stopped working after this happened. Of course, I want to know what could have caused this to happen. Could it have been from switching any settings or working with certain HD footage?
    It's a MacBook with Snow Leapord if that helps.

    yeah, you have to be careful with your terminology, otherwise you start a firestorm.
    Given the ONLY information we get in solving issues is what people write, accurate terminology is critical to solving the problem. If people need someone to read their mind, then they should to take their problem into a repair facility where the tech people can directly deal with the machine.
    Have fun.
    x

  • Final cut pro hd 4.5 doesn't work on my intel duo machine

    My final cut pro hd is about three years old. When I got a new mac pro, I ported everything including applications over.
    Not having used fcprohd for the last year, now, when I open the app in the intel machine, I get an error message asking for a later operating system, and an error message related to the video card. It works on my old power pc g4. Can I open and use final cut pro hd 4.5 on my intel duo processor machine, or do I need an upgrade? Is there an upgrade path to the newest version of fcpro which takes advantage of the duo intels?

    hey there bradsea,
    your version of FCP is not a Universal Binary. you'll need to upgrade to FCS2. there is an upgrade available if your version is not Academic. see this link:
    http://store.apple.com/AppleStore/WebObjects/BizCustom?qprm=78313&productLearnMo re=MA886Z/A
    good luck.

  • Final cut pro x 10.1 doesn't work

    Hello,
    from yesterday i can't open final cut pro x 10.1,
    When i launch the software by clicking on final cut studio pro x, it stop when appears "Restoring the window layout" 
    Please can you help me?
    Thank you
    Marco Lunetti

    Close it and re-open holding down the Option key.
    Choose another Library and open it.
    The current Library or something in there may be corrupted in some manner.
    Al

  • Final cut pro HD 4.5 is not running on my imac

    hi,
    i tried to install final cut pro HD 4.5 in my new imac g5 isight and the following message appeared: "Configuration Error This software requires certain hardware or software wich is missing *AGP graphics card"
    This means that my mac can't run final cut application ????? is that true???
    please help me
    thanks

    Hi, ragnar.
    See: http://discussions.apple.com/thread.jspa?messageID=1379896

  • I just clicked update in Final Cut Pro X and am now not seeing projects I had worked on.  Any chance I still have them?

    While importing new media, I clicked on "update" library - and now can't see projects I had worked on previously.  Anyone tell me if they are still there and where to find them?
    Thanks.
    Eric

    You will have to navigate your way to them.
    Select File>Open Library and you will probably see them listed.
    If not, click on "Other" and navigate to them.

Maybe you are looking for