HT201250 An unexpected error occurred (error code -6584). what does this error code mean ?

mac airport time machine i tried to open up error code 6584 would not open please help !

First, I strongly suggest that you make another full backup to a locally-attached external hard drive. You should do that anyway. One backup isn't enough to be safe, and backing up over a network is less reliable than backing up locally. Then try each of the following steps that you haven't already taken.
1. Restart the backup device. You can do that by disconnecting and reconnecting the power cord.
2. Hold down the option key and select Verify Backups from the TM menu in the menu bar (not the Dock icon.) This operation may take a long time. If the menu-bar icon (a clock that runs backwards) isn't showing, check Show Time Machine in menu bar in the preferences.
3. Erase the backup device. With a Time Capsule, you do that from within the AirPort Utility application; see its built-in help for details. All backups will be lost, so don't do this until you've backed up to another device. After erasing, select the TC again as a backup destination in the TM preference pane. The first backup should be made over a wired connection, if possible.

Similar Messages

  • I have never been able to connect to the itunes store. It always says"itunes could not connect to the itunes store. An unknown error occurred.(306)  So what does this mean and how can I fix it?

    I have never been able to connect to the itunes store. It always says"itunes could not connect to the itunes store. An unknown error occurred.(306) " So what does this mean and how can I fix it?

    Hello zabetnz
    Start with the article below to get access to the iTunes Store. If it does not work, then there are some links towards the bottom of the article for additional troubleshooting.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Regards,
    -Norm G.

  • When syncing phone or ipad to mac, I keep getting "cannot sync unknown error occurred (-50) 1726 items  What does this mean?  What do I do?

    when syncing iphone or ipad to imac, I keep getting "cannot sync unknown error occurred (-50) 1726 items " What does this mean?  What do I do?

    Hello, a couple of old possible fixes...
    http://www.edtechhacks.com/2007/12/solved-itunesiphoto-sync-error-50.html
    http://reviews.cnet.com/8301-13727_7-10435935-263.html

  • On updating Creative Cloud, I get an error code 50 - what does this error code mean?

    Downloading and installing an upgrade to Creative Cloud, I keep getting an error code 50.  I have look for a list of error codes with no luck.  Can anyone tell me what this error code means and what the fix is?  Thanks in advance.

    Error 50 https://forums.adobe.com/thread/1432237 may help

  • While importing a CD into my iTunes library I kept getting the following error message- iTunes library cannot be saved- An unknown error occurred (-54).  What does this error mean and what can I do about it??

    While importing a CD into my iTunes library I kept getting the following error message- iTunes cannot be saved- An unknown error occurred (-54).  what does this error mean and what can I do about it??

    The CD I imported (in the above post) is now not in my iTunes library. Any help would be appreciated .

  • What does this error mean: Adobe Illustrator CS5 15.0.2 Update There was an error downloading this update. Please quit and try again later. Error Code: U43M1D207

    When I click on the adobe installer icon to update my products, I get this message:
    Adobe Illustrator CS5 15.0.2 Update
    There was an error downloading this update. Please quit and try again later. Error Code: U43M1D207
    What does this mean and how do I solve it?

    See if the following helps:
    Error downloading, installing, or updating Creative Cloud applications

  • I have a scanner and i get the error code:201 what does this mean?

    i have a scanner and i get the error code:201 what does this mean?

    More information needed for someone to help... please click below and provide the requested information
    -PPro Information FAQ http://forums.adobe.com/message/4200840

  • HT203426 an unknown error occurred (29)...what is this mean ?

    an unknown error occurred (29)...what is this mean ?

    I have had this problem too and what worked for me is in this video!
    https://www.youtube.com/watch?v=wzPe34zGKMQ
    Good luck!

  • Itunes could not connect to the iphone an unknown error occurred 0xE8000003 please help me with this error any one have idea ?

    itunes could not connect to the iphone an unknown error occurred 0xE8000003 please help me with this error any one have idea ?

    http://support.apple.com/kb/ts3221

  • When i try to sync my ipad it comes up with an error code 0xE800000A, what does this mean?

    when i try to sync my ipad it comes up with an error code 0xE800000A, what does this mean?

    ERRORS WIN: iPhone iPad Ipod Touch Connection Error
    OxE   =   http://support.apple.com/kb/TS3221

  • What does this error means "Could not create Entity EJB"

    This error occurs when i tried to run my entitybean example, so may i know what does this error means? How can i resolve it?
    I am connecting to an Oracle8 DB, but it seems tat i have problem connecting to it and retrieving record from the database. Can anyone help me how to establish a connection to my Oracle DB??
    Need help urgently. thanx.!

    have you tried simple jdbc connection?
    Driver drv = Class.forName("oracle.jdbc.driver.OracleDriver");
    Connection conn = DriverManager.getConnection(oracle:jdbc:thin:@myhost:1521:instance, "usrname", "password");
    If this works you're able to connect! so check that your oracel datasource is well specified in your deploiement descriptor and that your bean references this datasource.
    hope it helps

  • What does this error message mean: "Filename: Mips32.ari TFTP Error: 'File not found' in AP-105"?

    Question: What does this error message mean: "Filename: Mips32.ari TFTP Error: ‘File not found’ in AP-105"?
    Product and Software: This article applies to AP-105.
    The root cause of this error is that the AP cannot perform a code upgrade.
    Scenario 1
    Check the ArubaOS code.
    The minimum requirement to bring up an AP-105 is ArubaOS 3.3.3+ or ArubaOS 3.4.1+.
    If the controller is running pre 3.3.3 code, upgrade the code to fix the issue.
    Scenario 2
    If the AP is not connected to the controller directly, bring up the AP in the controller and then connect it to the desired location. This process loads mips32.ari to the AP so that the AP can upgrade the code.
    Scenario 3
    The AP has no power adapter and you want to use the PoE feature. A few controller series like the 200 and 3000 Series do not support PoE. In this case, the AP cannot be terminated physically in the controller. Instead, connect the AP to the PoE switch, which is connected to the controller. Then assign a static IP configuration for the AP using the following commands:
    apboot> setenv ipaddr <ip address>
    apboot> setenv netmask <netmask>
    apboot> setenv gatewayip <ip address of the gateway>
    apboot> setenv master <ip address of the master>
    apboot> setenv serverip <ip address of the TFTP server>
    apboot> setenv bootcmd tftp
    apboot> save
    apboot> boot
    Locally configure the TFTP server for the AP and load the mips32.ari file from the controller with the help of the TFTP application.

    I want to download this file Mips32.ari for AP-105 device. Please give me this file download link. APBoot 1.2.4.4 (build 26618)
    Built: 2011-01-07 at 13:42:04Model: AP-10x
    CPU: AR7161 revision: A2
    Clock: 680 MHz, DDR clock: 340 MHz, Bus clock: 170 MHz
    DRAM: 128 MB
    POST1: passed
    Copy: done
    Flash: 16 MB
    PCI: scanning bus 0 ...
    dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
    00 00 168c 0029 00002 01 10000000 00000000 00000000 00000000
    01 00 168c 0029 00002 01 10010000 00000000 00000000 00000000
    Net: eth0
    Radio: ar922x#0, ar922x#1Hit <Enter> to stop autoboot: 0
    Checking image @ 0xbf100000
    Invalid image format version: 0xffffffff
    Checking image @ 0xbf800000
    Invalid image format version: 0xffffffff
    eth0 up: 1 Gb/s full duplex
    DHCP broadcast 1
    DHCP IP address: 192.168.x.xx
    DHCP subnet mask: 255.255.255.0
    DHCP def gateway: 192.168.x.xx
    DHCP DNS server: 192.168.x.xx
    DHCP DNS domain: xx
    ADP multicast 1
    ADP broadcast 1
    ADP multicast 2
    checksum bad
    ADP broadcast 2
    checksum bad
    ADP multicast 3
    checksum bad
    checksum bad
    checksum badRetry count exceeded
    DNS request 1 for aruba-master to 192.168.x.xx
    checksum bad
    checksum bad
    checksum bad
    T Using eth0 device
    TFTP from server 192.168.x.xx; our IP address is 192.168.x.xx
    Filename 'mips32.ari'.
    Load address: 0x2000000
    Loading: checksum bad
    T T checksum bad
    T checksum bad
    checksum bad
    checksum bad
    T checksum bad
    checksum bad
    T T checksum bad
    T checksum bad
    checksum bad
    T T T
    Retry count exceeded; starting again
    eth0 up: 1 Gb/s full duplex
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum badARP Retry count exceeded; starting again
    eth0 up: 1 Gb/s full duplexchecksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad  ThanKs :)
     

  • What does this error mean? There was an error in the App Store. Please try again later. (100)

    what does this error mean? There was an error in the App Store. Please try again later. (100)

    I have the same problem and thought it might be related to moving to Denmark. My app store account was set up for USA and then the error number in parentasis was (13). After changing the profile to Denmark the number changed to (100), like yours

  • -10810 error everyday at 4pm. What's this error?

    My iMac equiped with Snow Leopard get a -10810 error everyday at 4pm. What's this error?
    I repaired the permissions, re-indexed spotlight, trashed my prefs, no font conflicts. What else can I do?
    My Mac:
    3.06 Intel Core Duo
    12gb DDR3
    Thanks.

    See
    Error -10810 Openng Applictions or Relaunching Finder - The X Lab
    http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&ved=0CCsQ FjAA&url=http%3A%2F%2Fwww.thexlab.com%2Ffaqs%2Ferror-10810.html&ei=GlxYUvG1Bofs9 ATO1YC4Bg&usg=AFQjCNHtwbg3hhHsdAdRLC7x9-x-P7hyyw&bvm=bv.53899372,d.eWUerror -10810 when launching apps - The macosxhints Forums
    Fix the Finder Error-10810
    These are just three helpful links I found searching Google.

  • What does this error message mean and how do I solve it? "Sorry, one or more of the following command-line tools was not found:  /usr/bin/lsbom, /bin/pax, /bin/mkdir, /bin/chmod, or /usr/bin/update_prebinding."

    When I try to open up this program, Pacifist, I receive this error message. Here's a screenshot. http://i.imgur.com/v717w.jpg What does this error message mean and how do I solve it?

    It sounds like some of the Unix Executable commands were removed (or the permissions to those were modified) out of the /usr/bin/ folder.  You can try opening disk utility and repairing permissions on Macintosh HD or you can reboot your computer and holding down option-r when it comes back up to reinstall Lion again.  This will not delete your personal information or applications you have installed but it would be best to back it up to Time Machine before you do.  The article on how to do this is here. (http://www.apple.com/macosx/recovery/)  I have had to do this before and it works like a charm.  It should fix your issue but grab a cup of coffee because its going to take about 35 - 40 minutes depending on how fast your computer is.

Maybe you are looking for

  • Application Design Issue

    Hi, we are starting a project in Oracle ADF 11g, this is our first project in 11g, till now we were working in 10g deployment on OAS. When we were developing applications in 10g we created separate applications deployed on separated OC4J instances in

  • ThinkPad x240 missing drivers

    Hello! I've recently installed Windows 8.1 on my new ThinkPad x240 and I've been looking for certain missing drivers ... Those devices are marked as "Unknown" by the device manager and the drivers are most probably not downloadable from the lenovo dr

  • Error 1312 quick launch folder

    im having a problem with my itunes i just got a new video and sold my old nano i uninstaled my itunes and tried installing the new version but wen i download it from the apple website theres an error message that occurs saying error 1312 and it says

  • Where did my notes on Apple installed go to? They disappeared!

    Where did my notes on Apple installed Notes go to?  They disappeared!

  • Coursebuilder and LMS communication

    A few postings appeared over the past year regarding running web pages with Coursebuilder interactions and Knowledge Tracking on, but encountering the dialog, "Tracking System Not Found". I get the same dialog, too. I see no replies yet about this tr