HT201250 How long does it take to move 700gb from time machine to a new iMac?
How long does it take to move 700gb from time machine to a new iMac?
Last time I did this it took approx 2 and a half hours for 220 GB...
That was using an External USB 2 Time Machine Hard Drive.
Similar Messages
-
How long does it take to get approval from iTunes Connect and how do I find out if they are even working on it? I'm not really sure if my application was even delivered - from the links in IBA. Any suggestions how one might push the right buttons at Apple?
Also went around in a big circle trying to get beyond the confusion of not having the right Apple ID when I've had it a long time. Confusion abounds and learning this forum also takes a new degree of patience. Humbling to say the least :-)
Anyone been there done that?[email protected]
[email protected]
…support phone number call +1 (877) 206-2092.
Global Phone Support
We have expanded English-language publisher phone support. To make contacting the iBookstore support even easier, new local phone numbers are now available for Australia, France, Germany, Italy, Netherlands, Spain, and the U.K. Support is available Monday to Friday, from 7 a.m. to 5 p.m. (PT).
Country
Phone Number
Australia
1300 307 504
Note that this is a low tariff number.
France
0805 540 117
Germany
0800 664 5307
Italy
800 915 902
Netherlands
0800 0201 578
Spain
900 812 687
U.K.
0800 975 0615
U.S.
+1 (877) 206-2092
Toll-free from U.S. and Canada. -
How long does it take to transfer data from a PC to a Mac?
Using Migration Assistant and I am transferring data from PC to IMac. Have no idea how ling this process should take. How long does it take to transfer data from a PC to a Mac?
This may not be the best forum to get an answer.
Depending on what is being/can be migrated it may be dependent on how much data is on the PC already.
AC -
How long does it take for phone to work on the day of new billing cycle
i was wondering because it just became the 12th where im at in california and i went over last month on my billing cycle how long does it take for the phone to work at the start of the new day?
You would most likely need to talk to your carrier to get the answer to that. The carriers that I have used would charge for overages rather than dropping service for the remainder of the billing period but if your plan is different than that you would either need to talk to the carrier or provide more information on the carrier an the plan so someone here who has the same plan may help.
-
How long does it take to get mail from adobe??
hi, i have lost my photoshop elements box with my serial code and i chatted with one of the adobe team members and they asked me to send them the invoice and i did and then they said they will give it to someone higher up to send me mail to give me further assistance but i am wondering how long does it take to get the mail.
thanks
Benjamin[email protected]
[email protected]
…support phone number call +1 (877) 206-2092.
Global Phone Support
We have expanded English-language publisher phone support. To make contacting the iBookstore support even easier, new local phone numbers are now available for Australia, France, Germany, Italy, Netherlands, Spain, and the U.K. Support is available Monday to Friday, from 7 a.m. to 5 p.m. (PT).
Country
Phone Number
Australia
1300 307 504
Note that this is a low tariff number.
France
0805 540 117
Germany
0800 664 5307
Italy
800 915 902
Netherlands
0800 0201 578
Spain
900 812 687
U.K.
0800 975 0615
U.S.
+1 (877) 206-2092
Toll-free from U.S. and Canada. -
How long does it take to move files to a new MacBook Air?
I am using Migration Assistant to move files from my older MacBook Air with 120 gb of data on it to my new one that has a 500 gb hard drive.
The Assistant has been working for over 4 HOURS and still just says that it is "preparing" to move files. Thus it seems that nothing has actually been transferred yet?
How long should this process take? Is something actually happening?
Any help will be appreciated.Using Setup Assistant on a clean install to an external USB 3.0 drive, it took about 20 minutes to import about 150 GB worth of apps, documents, data & users.
I've only used Migration Assistant once, about two years ago. It was messy, but still I don't recall it taking too long. It's too bad you didn't use Setup Assistant on the very first boot. It is vastly superior. I've used Setup Assistant maybe two dozen times on fresh installs for dev work, and it works quite fast and clean. -
How long does it take to transfer data from a time machine back up?
I am in the process of transferring my data from my time machine back up from my old mac to my new mac and this seems to be taking a long time. What is everyone's experience for how long this takes?
That does seem a tad excessive. What connection are you using? Ideal is firewire; Airport would be slowest (quite possibly as long as you say).
-
HT4500 How long will it take to transfer 400gb from time capsule to my iMac using mountain lion
I did a clean install on my iMac. Now I cannot access my backups. I can see the time capsule, but when I open time machine, I only have today which is the newly installed system. I am now trying to use migration assistant to grab my files. I got to where I choose my time machine and entered my password. Now I don't see any action. How long will the transfer take? My 500 gb time capsule is full. Should I be seeing something on my screen.
This depends on what the connection type is for the computer to the Time Capsule - wireless or Ethernet, how much data are involved, what generation of Time Capsule, and whether the transfers are to an HDD or SSD.
-
How long does it take to write data from network analyzer
I am using LabVIEW to control two DC power supplies through GPIB-USB and I have a DAQ-6008 generating 8-bit digital output. I am connecting two DC power supplies and the 8-bit digital signal to my circuit and want to measure s parameters (all S11, S12, S21, S22) and write their magnitude and phase to a .txt file in my laptop. It worked but took about 1.5 minutes to write data (magnitude and phase of four s parameters) for a fixed DAQ output and fixed DC voltage by only sweeping 6 points. Is it a reasonable time? Because eventually I will have more than ten thousand combinations and need to record s parameters for all these combinations and it will take too long. I would like to know which part spends more time or how I can reduce the time to write four s parameters. Thanks a lot.
Attachments:
Agilent E3631 Output 2 DC Volts_for loop.vi 22 KB
Agilent PNA Series Config And Read Data_test(4).vi 32 KB
Main(2).vi 30 KBHello yll,
-So you mean I should delete some of the controls
in the front panel and make them a fixed value or default in the block
diagram to reduce the front panel controls
What Dennis is saying is that your front panel controls are only read once by your program. The are read at the beginning and the value is passed into the while loop. This is the value that will be used, even if you change the front panel. You can verify this by using highlight execution.
-What does it mean that I am
resetting the instrument each time?
Everytime you call the initialize VI, you send a command for the instrument to reset. This is not necessary, since you want your settings to remain for the entire program. You can reset it when you "first" start using it, but as your program keeps going, you do not need to reset it.
-Do I need the initialize VI and
close VI in every iteration or I should have them out of the loops so
all the instrument are initialized and closed only once throughout the
entire process?
That is exactly what you should do.
-For the network analyzer, when you said I only need the
VIs from initialize.vi to read data.vi (the second one from the end),
do you mean that I can delete the close.vi? and why does it make the
program faster?
You should probably add the close outside the loop, as good practise. I would still put the initialize outside the loop.
I hope this helps.
O. Proulx
National Instruments
www.ni.com/support -
How long does it take to transfer files from Windows to Macbook Pro
Hi guys
I just got a macbook pro (not the one with retina display)
I have all of my files on my windows and just started to set up my mac using the windows transfer program, but it is taking a really long time. The estimate time remaining jumps between 30-35 hours. This is over Wi-Fi. I have read that it is faster using an Ethernet cable, I think I have one that is pluged into connecting both computers, but it isn't speeding anything up.
What should I do? I don't want to leave either computer on for such a long time. (is there anything I should put my Mac on so it doesn't overheat, its currently on a wood table).
Should I stop it? I dont want to ruin anything on the computer so soon. If so, how do I do it. I had already started to transfer files earlier today but accidently closed the Mac, which stopped the process and couldn't restart it again, so I turned it off since I couldn't find anything on the screen to stop it.
I have an external harddrive that was connected to my windows, would it be faster to hold the mac's power button, start the startup again and just connect the external harddrive?
Please help. Thanks in advance.Wi-Fi is slowest. Wi-fi must fight interference and other environmental challenges that cables don't have to worry about at all.
Cabled Ethernet would be much faster. If your Windows computer has Gigabit Ethernet, it could actually be faster than FireWire.
msoho wrote:
I have an external harddrive that was connected to my windows, would it be faster to hold the mac's power button, start the startup again and just connect the external harddrive?
I would only abort if there is a safe way to (like a visible Cancel button), otherwise you may lose data.
Connecting the external hard drive to the Mac could work, but if the hard drive is formatted with the NTFS disk format, you must have extra software on your MacBook Pro that can read that. If the drive is formatted as FAT32, it should work since Macs can read (but not write to) that Windows disk format. -
I have 1500 pictures on my I phone and I started importing them to I photo, but it takes a lot of time and not completed yet?
Is that normal? I am not plugging the phone all the time, so does it resume automatically when I connect it or should I do something?
Appreciate your help,
ThanksYou need to retore the iPad via iTunes
Connect the iPad to your computer and restore via iTunes
iTunes: Restoring iOS software -
How Long does it take for newly released movies to be available on iTunes
How long does it take for newly released movies to be available on itunes
When they're released as DVDs.
-
How long does it take to typically down load a movie on Apple TV
How long does it take to typically down load a movie on Apple TV
That depends on the length of the movie, the resolution, and the speed of the Internet connection.
-
HT5731 how long does it take to download a movie from itunes
how long does it take to download a movie from itunes
Hi jtkirkuk,
Welcome to the Support Communities!
The article below may be able to help you with this.
iTunes Store: Movie rental frequently asked questions (FAQ)
http://support.apple.com/kb/ht1657
Cheers,
- Judy -
If I wanna rent a movie from iTunes to my iPad how long does it take to download?
If I wanna rent a movie from iTunes to my iPad how long does it take to download?
Yes.
Wirelessly with Airplay and with an Apple TV 2 connected to your HDTV with the Apple TV connected to the same wireless network as your iPad.
http://support.apple.com/kb/HT4437
Maybe you are looking for
-
Design flaw in Microsoft Office 2004 - Anyone can get it for free!
Hello all. This is going to sound a bit strange, but I've been in the pub today giving my new MacBook owning friend a lesson in the joys of Mac goodness. One of the best things was discovering that I could use Bluetooth to beam across some of my favo
-
Instalè Itunes 10.4 de 64 bits en mi ordenador, pero cuando quiero abrirlo me sale un mensaje en inglès que dice: Apple application Support was not found. is required to run Itunes. Please unistall Itunes, then install iTunes again. Error1(windows
-
HT5012 How can I switch over to uk store
I want to use the U.K Store apps to install some programs but can't because all the apps ore for the US Market. Can someone help please.
-
X-Fi support digital OPTICAL SPDIF outp
From what I've been able to tell so far is that the only way to get the optical output is to spend a lot of money on the platinum version of the X-Fi. Am I wrong or is Creative being creative in manipulating their sales and their bottom line? Thank y
-
Camera light wont turn off on macbook
I turned my laptop on this morning and the glowing green light next to the built in camera was on. There are no applications or websites that use a camera open. I restarted it but the light is still on. How do I turn it off and why might it be on?