HT201250 looking for the hard disk (time capsule) and preparing the backup is taking too much time (wirelessely) !! what shall i do

when i conect it by to my laptop with the cable, it do the back up smoothly,
but wirelessly, it doesnt !!!!
whats the problem ?
how can i solve it ?
what shall i do ?

Try 10.7.5 supplemental update.
This update seems to have solved this problem for many.
Best.

Similar Messages

Sharepoint -Creating document libraries at run time and add and delete permission at runtime--taking too much time in C#(SOM)

Hi,
I am creating a batch job in C# and my requirement is as follows.
My Requirement is to create multiple document libraries and after breaking inheritance I remove all the groups which that library inherits and add some groups which are created for that library.Initially when libraries are less the creation
of library is good but once it gets increased ,system takes lot of time.I will have to create around 2000 libraries and almost 600-700 groups.
Q.1 ) What would be my approach?
Q.2) Do we have powershell command which can break inheritance and delete all the default groups in a one go (without looping) of a library?
Please suggests.

Hi,
It is recommended to create timer job for the time consuming job when in SharePoint environment.
About creating timer job:
http://www.codeproject.com/Tips/634208/Create-and-Deploy-Custom-Timer-Job-Definition-in-S
If you want to do it via PowerShell, the links below would be helpful.
About how to stop inheriting permission for SharePoint list and give custom permission using PowerShell:
http://www.sharepointlovers.com/sharepoint-powershell-command-to-stop-inheriting-permission-for-sharepoint-list-and-give-custom-permission/
About How to remove users and groups from a SharePoint list using PowerShell:
https://sharepointthinking.wordpress.com/2012/10/01/how-to-remove-users-and-groups-from-a-sharepoint-list-using-powershell/
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Trying to restore after getting a new hard drive. I can see the backup on the Time Capsule and on the correct date but it is Greyed out. That is it wont let me open it and restore the machine. Have tried also Migration Assistant, no luck.

Trying to restore after getting a new hard drive. I can see the backup on the Time Capsule and on the correct date but it is Greyed out. That is it wont let me open it and restore the machine. Have tried also Migration Assistant, no luck.

https://discussions.apple.com/thread/5210788?tstart=0
At startup hold down the Command+Option/Alt+r keys until you see a globe on the screen. Then use disk utility to partition and format the drive HSF+ and then select Reinstall Mac OS X. whatever version of OS X that originally came on your system will be installed and then you can upgrade back to Mavericks.

I have changed the name and password for my Time Capsule and now the Time Machine will not connect

Mac Book Pro
1TB Time Capsule.
Yesterday I changed the name and password on my time capsule and also the name and password of the wifi network as I was having problems with the speed of the internet when using Safari on any of my devices (1 Macbook pro, 1 macbook air, 27" iMac, iPhone and iPad) all other internet services were working fine (email etc.) This seems to have solved the problem.
However, since then, my time machine back ups will not reconnect and there is no option for me to reconnect to the existing back up for my macbook pro.
When I enter the time machine preferences it shows as below that there are no back ups.
Then, when I go to select a drive to use which should be the MacBook under the Backup disks the only option is for me to Remove Disk...
So, my question is, how do I reconnect to an existing Time Machine back up for my MacBook pro as I really do not want to erase and start all over again.
Warning - In my naiveté, I did click on the MacBook in 'Available Disks' but I got the impression that it was about to start a whole new back up and not work with the existing one.
(And does anybody have an inkling as to why there was a problem with Safari on all my devices? I downloaded Google Chrome and that worked fine).

Simply reset the Time Machine.
See A4 here http://pondini.org/TM/Troubleshooting.html
You can then mount the TC disk in finder after you reboot the computer.
You should be able to reselect the TC disk and then it will say it is going to start a new backup.
Ignore this.. when the TM actually loads the TC disk it will discover the existing backup and continue the backup.. but it will give no hint until it actually starts that it won't start a new backup. you just have to believe it won't.. and mostly it works..
Please also install the widget A1 so you have some idea what TM is doing.

Can i get the time capsule to automatically back up my file from my Mac Book Air but have certain files which are only stored on the time capsule and not the computer? Then can i access these files only on the time capsule without connecting it?

Can i get the time capsule to automatically back up my file from my Mac Book Air but have certain files which are only stored on the time capsule and not the computer? Then can i access these files only on the time capsule without connecting it?

igonneau wrote:
Can i get the time capsule to automatically back up my file from my Mac Book Air but have certain files which are only stored on the time capsule and not the computer?
You can, but how are you going to back up those other files? When (not if) your Time Capsule fails, you risk losing them. See #Q3 in Using Time Machine with a Time Capsule for details.
Then can i access these files only on the time capsule without connecting it?
Not sure what you mean. You have to connect a computer, either via Ethernet cable or wirelessly, to read or write to the disk.

I want to give away or sell a 6500/250 running 7.6.1. How can the hard disk be erased so that the data are gone, not recoverable? thanks, LifeisRich

I want to give away or sell a 6500/250 running 7.6.1. How can the hard disk be erased so that the data are gone, not recoverable? thanks, LifeisRich

I'd recommend that you check for Mac User Group(s) in Orange County. That's where you'd likely find a diehard Mac fanatic who might want to add your 6500 to his/her collection. Even if you got nothing for it, it would be better than e-cycling it. I upgraded my 6500/275 with what was a "large" hard drive at the time (15 GBs), maxed the memory at 128 MBs, installed the 512K L2 cache card, a better ATI Rage Pro PCI graphics card, a USB PCI card, and an internal 56K modem. With it running OS 9.1, it did all of the pre-OS X stuff I needed it to do. As I previously mentioned, it's a nice-sounding MP3 player. Internet Explorer 5.1.7 (the final release from 2001) kept it useful for surfing the web up until 2005, when it became too outdated/incompatible with many web sites. Unfortunately, the demands of the internet and the need for a modern browser, as well as faster processing to digest it all, are what retired many older Macs from active duty. So my (2) 6500s and (3) 6400s (same tower design) sit in storage. There is one concern that I'll pass along: The motherboard has a 4.5-volt alkaline battery, that's a small, black plastic cube, secured in place by velcro. If your 6500 has been disconnected from electricity for a long time, the battery will undoubtedly be dead. Unlike the many Apple computers that used a small ½AA lithium battery (that I've never seen leak when completely dead), the 6500's battery can and usually does start leaking. Because the motherboard sits vertically oriented on its side edge when installed, the leaking battery will drip alkaline solution down the board, corroding any components in it path. I've seen motherboards ruined from this. If you're going to give it away or sell it, you might want to pull the motherboard (remove the two machine screws on the rear I/O panel, next to the pull tabs). Slide out the board and unplug the battery's small connector (has red & black wires), then lift up on the battery, while holding down the "toothed" velcro mount with something non-conductive, like a popsicle stick. Once it's free, dispose of the battery. If you're interested, a replacement can be purchased for about $5-$7 from battery specialty retailers - it's a Rayovac 870 or 871. Even if you don't replace it, removing one that will eventually leak is a good idea, (hopefully) before any damage is done.

I am running iTunes on an IBM comp system Win XP with a 70gb hard disk. I have 4 kids with 4 IPOD Touches. Their apps and album art are eating up the hard disk space. I changed the Media Folder to an external hard disk. How do I get the apps to go their?

I am running iTunes on an IBM compatible system running Windows XP with a relatively small hard disk (70gb). I have 4 kids with 4 IPOD Touches, multiple IPOD Nanos, etc. Their apps and album art are eating up the hard disk space. I changed the Media Folder through Edit, Prferences, Advances, iTunes Media Folder to an external hard disk. The new music downloads and purchases go there but the apps and other items do not. How do I get the apps and other iTunes software and downloads to go to the external hard disk

There is no built in function to make this happen.
Your options are:
Upgrade the existing hard drive.
Try creating a link for the app folder on the external drive... this may or may not work.
Realistically, a larger hard drive is a better solution, then use the external drive for keeping a backup of the ENTIRE iTunes folder and any other personal data on the system.

How can I be sure that the back up to my time capsule has backed everything up as when I enter time capsule and interogate the back ups i can't identify individual music or picture files?

How can I confirm that the back up to my time capsule has backed everything up as when I enter time capsule and interrogate the backs ups I can't identify individual photo or music files?

You cannot browse a Time Machine backup with the Finder. To restore individual music files or any other files normally available in the Finder, open your Music folder then "Enter Time Machine" using the Time Machine icon.
Restoring individual photographs is slightly more cumbersome. Apple recommends restoring the entire iPhoto Library, but if you want to locate an individual photograph you could use Time Machine to restore the old Libary. Restore it to an alternate location to avoid overwriting your existing one. Open iPhoto while holding an Option key, open the restored Library, find the photo you need and export it, close iPhoto, re-open it with your usual Library, and import the photo.
Time Machine depends upon a number of sound engineering principles for reliable operation, one of which is "faith"
Your files will remain intact until your Time Machine backup device becomes inoperative.

Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.

Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.

stop the download if it's stalled, and restart your download.

HT201250 my time capsule is taking too much time indexing backup and then taking longer time to back up ( 207 days ) or longer !!! what shall i do ?

my time capsule is taking too much time indexing backup and then taking longer time to back up ( 207 days ) or longer !!! what shall i do ?

Try 10.7.5 supplemental update.
This update seems to have solved this problem for many.
Best.

Hi from the last two days my iphone have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

Hi, from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

The Basic Troubleshooting Steps are:
Restart... Reset... Restore...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

Report taking too much time in the portal

Hi freiends,
we have developed a report on the ods,and we publish the same on the portal.
the problem is when the users are executing the report at the same time it is taking too much time.because of this the perfoemance is very poor.
is there any way to sort out this issue,like can we send the report to the individual user's mail id
so that they can not log in to the portal
or can we create the same report on the cube.
what could be the main difference if the report made on the cube or ods?
please help me
thanks in advance
sridath

Hi
Try this to improve performance of query
Find the query Run-time
where to find the query Run-time ?
557870 'FAQ BW Query Performance'
130696 - Performance trace in BW
This info may be helpful.
General tips
Using aggregates and compression.
Using less and complex cell definitions if possible.
1. Avoid using too many nav. attr
2. Avoid RKF and CKF
3. Many chars in row.
By using T-codes ST03 or ST03N
Go to transaction ST03 > switch to expert mode > from left side menu > and there in system load history and distribution for a particular day > check query execution time.
/people/andreas.vogel/blog/2007/04/08/statistical-records-part-4-how-to-read-st03n-datasets-from-db-in-nw2004
/people/andreas.vogel/blog/2007/03/16/how-to-read-st03n-datasets-from-db
Try table rsddstats to get the statistics
Using cache memory will decrease the loading time of the report.
Run reporting agent at night and sending results to email. This will ensure use of OLAP cache. So later report execution will retrieve the result faster from the OLAP cache.
Also try
1. Use different parameters in ST03 to see the two important parameters aggregation ratio and records transferred to F/E to DB selected.
2. Use the program SAP_INFOCUBE_DESIGNS (Performance of BW infocubes) to see the aggregation ratio for the cube. If the cube does not appear in the list of this report, try to run RSRV checks on the cube and aggregates.
Go to SE38 > Run the program SAP_INFOCUBE_DESIGNS
It will shown dimension Vs Fact tables Size in percent.If you mean speed of queries on a cube as performance metric of cube,measure query runtime.
3. To check the performance of the aggregates,see the columns valuation and usage in aggregates.
Open the Aggregates...and observe VALUATION and USAGE columns.
"---" sign is the valuation of the aggregate. You can say -3 is the valuation of the aggregate design and usage. ++ means that its compression is good and access is also more (in effect, performance is good). If you check its compression ratio, it must be good. -- means the compression ratio is not so good and access is also not so good (performance is not so good).The more is the positives...more is useful the aggregate and more it satisfies the number of queries. The greater the number of minus signs, the worse the evaluation of the aggregate. The larger the number of plus signs, the better the evaluation of the aggregate.
if "-----" then it means it just an overhead. Aggregate can potentially be deleted and "+++++" means Aggregate is potentially very useful.
In valuation column,if there are more positive sign it means that the aggregate performance is good and it is useful to have this aggregate.But if it has more negative sign it means we need not better use that aggregate.
In usage column,we will come to know how far the aggregate has been used in query.
Thus we can check the performance of the aggregate.
Refer.
http://help.sap.com/saphelp_nw70/helpdata/en/b8/23813b310c4a0ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/60/f0fb411e255f24e10000000a1550b0/frameset.htm
performance ISSUE related to AGGREGATE
Note 356732 - Performance Tuning for Queries with Aggregates
Note 166433 - Options for finding aggregates (find optimal aggregates for an InfoCube)
4. Run your query in RSRT and run the query in the debug mode. Select "Display Aggregates Found" and "Do not use cache" in the debug mode. This will tell you if it hit any aggregates while running. If it does not show any aggregates, you might want to redesign your aggregates for the query.
Also your query performance can depend upon criteria and since you have given selection only on one infoprovider...just check if you are selecting huge amount of data in the report
Check for the query read mode in RSRT.(whether its A,X or H)..advisable read mode is X.
5. In BI 7 statistics need to be activated for ST03 and BI admin cockpit to work.
By implementing BW Statistics Business Content - you need to install, feed data and through ready made reports which for analysis.
http://help.sap.com/saphelp_nw70/helpdata/en/26/4bc0417951d117e10000000a155106/frameset.htm
/people/vikash.agrawal/blog/2006/04/17/query-performance-150-is-aggregates-the-way-out-for-me
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
http://help.sap.com/saphelp_nw04/helpdata/en/c1/0dbf65e04311d286d6006008b32e84/frameset.htm
You can go to T-Code DB20 which gives you all the performance related information like
Partitions
Databases
Schemas
Buffer Pools
Tablespaces etc
use tool RSDDK_CHECK_AGGREGATE in se38 to check for the corrupt aggregates
If aggregates contain incorrect data, you must regenerate them.
202469 - Using aggregate check tool
Note 646402 - Programs for checking aggregates (as of BW 3.0B SP15)
You can find out whether an aggregate is usefull or useless you can find out through a proccess of checking the tables RSDDSTATAGGRDEF*
Run the query in RSRT with statistics execute and come back you will get STATUID... copy this and check in the table...
This gives you exactly which infoobjects it's hitting, if any one of the object is missing it's useless aggregate.
6
Check SE11 > table RSDDAGGRDIR . You can find the last callup in the table.
Generate Report in RSRT
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4c0ab590-0201-0010-bd9a-8332d8b4f09c
Business Intelligence Journal Improving Query Performance in Data Warehouses
http://www.tdwi.org/Publications/BIJournal/display.aspx?ID=7891
Achieving BI Query Performance Building Business Intelligence
http://www.dmreview.com/issues/20051001/1038109-1.html
Assign points if useful
Cheers
SM

Taking too much time for saving PO with line item more than 600

HI
We are trying to save PO with line items more than 600, but it is taking too much time to save. It is taking more than 1 hour to save the PO.
Kindly let me know is there any restriction for no. of line items in the PO. Pls guide
regards
Sanjay

Hi,
I suggest you to do a trace (tcode ST05) to identify the bottleneck.
You can know some reasons in Note 205005 - Performance composite note: Purchase order.
I hope this helps you
Regards
Eduardo

Why it is taking too much time to kill the process?

Hi All,
Today,one of my user ran the calc script and the process is taking too much time, then i kill the process. I am wondering about one thing here even it is taking too long to kill the process, generally it will not take more than 2 sec. I did this through EAS.
After that I ran Maxl statement
alter system kill request 552599515;
there is no use at all.
Please reply if you have any solutions to kill this process.
Thanks in advance.
Ram.

Hi Ram,
1. Firstly, How much time does your calculation scripts normally run.
2. While it was running, you can go to the logs and monitor where exactly the script is taking time .
3. Sometimes, it does take time to cancel a transaction ( as it might be in between).
4. Maxl is always good to kill ,as you did . It should be succesful . Check the logs what it says ,and also the "sessions" which might say "terminating" and finish it off.
5. If nothing works ,and in the worst case scenarion , if its taking time without doing anything. Then log off all the users and stop the databas and start it .
6. Do log off all the users, so that you dont corrupt any filter related sec file.
Be very careful , if its production ( and I assume you have latest backups)
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

Still the report is taking too much time

Hi All,
When i refresh a webi report the report is taken too much time to refresh(open).
In back end i have checked all the connections, contexts, cardinalities, joins, conditions...etc, in webi i have enabled the the check box 'query stripping'.
but still the report is taking too much time, i didn't identified the problem?
Please help me on this.
Thanks in advance..

Hi Mark,
How many queries are there--2
How many rows are returned--- 2000+
Are all measures defined with aggregates-- Yes
What is the array fetch size? (I1000 if it isn't already)

HT201250 looking for the hard disk (time capsule) and preparing the backup is taking too much time (wirelessely) !! what shall i do

Similar Messages

Maybe you are looking for