HT201250 old data transferred to new computer via time machine, is external hard drive still usable

I set up my new macbook from an old macbook via time machine and an external WD Harddrive.
The setup partitioned my macbook to two user id's, now I need to back up. 
The old user id is backing up everything again and the new user id wants to create a new backup to my WD Harddrive like it is not used.
I don't believe that my WD was partitioned.
Help!  How can I continue using my WD and backup both user id information without losing anything?

Welcome to the Apple Support Communities
When you turn on the new iMac for the first time, Setup Assistant will ask you to restore a backup, so connect the external disk and follow steps to restore all your files to your new iMac. Your new Mac will have the same settings and programs as your old computer.
In other cases, I would recommend to restore the whole backup without using Migration Assistant or Setup Assistant, but a Late 2012 iMac uses a special OS X build, so the OS X version that you're using on your old Mac won't work on the new one. For more information, see > http://pondini.org/OSX/Home.html

Similar Messages

  • I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase and start over?

    I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase that mess and start over?

    Hello there, LynnS.
    The following Knowledge Base article and it's referenced link should get you started with the Erase and Install of Mavericks:
    OS X Mavericks: Erase and reinstall OS X
    http://support.apple.com/kb/PH14243
    Once you've gone through those 2 articles, this article should help you with restoring from your Time Machine Backup:
    OS X Mavericks: Recover your entire system
    http://support.apple.com/kb/PH14185
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My time machine backup external hard drive has failed.  I have a newer external drive already connected to my MAC but can't figure out how to get Time Machine to set up on it?

    My time machine backup external hard drive has failed.  I have a newer external drive already connected to my MAC but can't figure out how to get Time Machine to set up on it

    http://pondini.org/TM/21.html

  • Why does my iMac (with Mountain Lion) no longer recognize my external hard drive I have used as a back up via Time Machine after the hard drive was accidentally unplugged?

    Why does my iMac (with Mountain Lion) no longer recognize my external hard drive I have used as a back up via Time Machine after the hard drive was accidentally unplugged?

    Do you mean the external hard drive is not mounted on the iMac desktop?
    Check if Disk Utility sees the drive. Applications / Utilities / Disk Utility. If the external shows up in the left column, select it and click on Mount.
    If it does show up this way, I recommend using DU to Repair Disk.

  • Opening Lightroom for first time from new computer where library is on external hard drive

    There has to be an easy way to open my lightroom library from my new computer where the library is already on an external hard drive because that's where I was told to put it to make this whole process easy. Well, I can't find any information on how to do this and I'd rather not mess up my photos!

    Could you be specific about the problem you are having? What happens when you try?
    Also please be sure to state your operating system and what version of Lightroom.

  • Can I use old time machine as external hard drive

    I just bought the new 2 TB time machine, and I have an old 2 TB time machine.  Can I use the old TM as an external hard drive?  If so,  do I just use a usb cable to connect it to my computer?  Thanks for help. 

    You cannot use it by USB.. 
    You can use it via the network.. bridge the old TC and plug it by ethernet into the new one.
    You can then access it and use it via network the same as the new TC.

  • HT201250 Mac's Time Machine and external hard drive usage.

    If you back up your Mac to an external hard drive with Time Machine, can all those files on the external drive be transferred to a new Mac later?

    Yes.

  • After backing up through time machine on external hard drive, how do you access that data?

    I backed up my MacBook to an external hard drive through Time Machine. After it was all done and I reconnected the external hard drive to make sure that I could access everything that was backed up, I couldn't get into the data on the external hard drive because it said that it was backed up through Time Machine.
    What does this mean? How to I access the data that is on my external hard drive?

    There are 2 options.
    1) (The Suggested way) With the TM external drive connected Open The Time Machine App in Applications and you can browse what has been backed up.
    2) Open Finder and select the drive name on the left then the Backups.backupsdb folder and in there is all your files from the backups you have made listed under your Machine Name and in that folder under the dates/times they were created

  • Transferring to new iMac via time machine - how to use Ethernet?

    Hi, I am setting up a new iMac and transferring my files from my MacBook (2007) using time machine. I started the transfer wirelessly (foolishly) but it predicted it would take 36 hours. With the transfer still happening I have now attached an Ethernet cable but the countdown is the same, presumably because the wireless transfer is still taking priority.
    Is it risky to abandon the transfer midway through? If not, once I have stopped it, how do I ensure the ethernet takes priority, considering that I am still at the very early stages of iMac setup (so have not gone through to the normal home screen etc)?
    Another issue is that the screen seems to sleep every 30 mins, so I am not sure the wireless transfer will keep progressing overnight...?
    Many thanks in advance for any pointers.

    Receiving Code 150:30 lead me to the following Adobe link...
    http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
    This Adobe page provides an app (LicenseRecovery 11.6.1), supposedly designed to reinstate a licensing issue. When I opened the file, and tried to open the app that's suggested on this page, the program hung. I assumed the app hadn't been updated for Mountain Lion.
    Wouldthis app address the issue if it had worked?

  • Using Time Machine from external hard drive to start using a new MacBook

    I recently totalled my MacBook (white) and am now looking to replace it with a second hand MacBook. I have an (un-totalled) external harddrive and have been using Time Machine to keep everything backed up. I found a second hand MacBook at a reasonable price but it runs OSX Tiger, whereas my old one ran Leopard. So my question is, will it be possible to plug in my external harddrive and restore everything, including the operating system, on this new (used) MacBook, or should I be looking for one that runs Leopard?
    Many thanks for reading!

    You can restore from Time Machine using Leopard or Snow Leopard only. What I would do if I were you is buy either of the MacBooks, but make sure you get a Snow Leopard install disc--either a retail one if you buy the Tiger MacBook, or the install disc for the pre-loaded software on the SL MacBook.
    Use the SL install disc to completely erase and (re)install Snow Leopard on the MacBook. Since your Mac will be second-hand, you should fully erase it and start fresh, just in case there are some nasty little malwares left behind or other problems the original owner didn't want to deal with.
    After the install, use Migration Assistant to get your data off the TM drive.

  • Imported old computer via time machine into new 2012 macbook pro, but its still running ilife 09 instead of 11?

    imported old computer via time machine into new 2012 macbook pro, but its still running ilife 09 instead of 11?

    I am assuming you had iLife 09 on the old computer - when you moved everything over, that came along with it.
    I also have older versions of iLife (on install disks) and just recently got a new 2012 Macbook Pro. I noticed that iMovie 11, iPhoto and Garageband (I think) are listed in my Mac App Store Purchases with a notation to "accept". So you might want to check MAS to see if the apps are sitting there.
    Now, I have chosen not to accept them for now for two reasons: I have iLife 11 on a disk and prefer that rather than having it tied to MAS/Apple ID and as long as I have my disk version installed, I also still have iDVD which I use a lot. I'm not sure if "accepting" those three from MAS would wipe out my iLife 11 installs including iDVD (which would be unacceptable for me). So, since I already have the latest version, I've opted to ignore the "accept" and, in fact, will leave it like that - if I ever sell this machine, the buyer can then accept them if they want with their own Apple ID. So before accepting the apps (if they are listed in MAS), you might want to check to make sure that your iLife install isn't wiped out - that is, if you have iDVD and want to keep it.

  • Whats the best way to transfer everything from my old macbook pro to a new mac mini, i have a external hard drive which i backup to regularly via time capsule

    whats the best way to transfer everything from my old macbook pro to a new mac mini, i have a external hard drive which i backup to regularly via time capsule

    Check out > OS X Lion: How to use Migration Assistant to transfer files from another Mac

  • My PC computer was wiped (virus) including itunes. How do I transfer the many playlists and music to the new re-installed itunes?? Ipod is synced to old itunes. I have all original music files on external hard drive. Please help?

    My PC computer was wiped (virus) including itunes. How do I transfer the many playlists and music on my ipod to the new re-installed itunes?? Ipod is synced to old itunes. I have all original music files on external hard drive. Please help?
    New itunes is trying to wipe the ipod. But have many many playlists (many hours making) which I want to save. Any help would be appreciated.

    If you want to just extract the playlists from your iPod, plug it in iTunes.  When it appears under devices, right->click on it and choose Export Playlists.  Save them to a location such as your desktop and them import them into your library once you have copied and imported all of your music back into it.
    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • Can a computer crash disable (break) an external hard drive?

    Can a computer crash disable (break) an external hard drive (FW800)?
    My mac pro started to see programs crash. First one, that wouldn't 'force quit', then a minute later a second. This had happened before last year, so i started quitting apps to restart. At the end, half of them i succeeded to quit and about 4 wouldn't quit. The finder was frozen/crashed, no dock or apple menu or any menu for that matter. The mouse moved. i could shortcut 'force quit' and 'return' on default OKs.
    So i powerbuttoned down. On rebooting, the volumes on the Mercury Elite* unit in question didn't mount. I looked for them with disk utility but nothing. So i then examined the unit. A soft clicking noise was emanating and the power adapter was HOT!
    The two drives are now in the mac pro internally and are working fine. But before i took them out, i tested the pins on the power adapter with a voltmeter, according to the schematic on the adapter itself and i got 5,5v on the one side and 13 odd v on the other. Apparently what's supposed to be coming out. (5v and 12v)
    Can a powerbutton shutdown shoot electricity through the FireWIre bus? Any ideas?
    http://eshop.macsales.com/item/Other%20World%20Computing/MEFW924AL2K/

    Can a computer crash disable (break) an external hard drive (FW800)?
    No, but it could damage files or the directory structure, so the drive wouldn't mount. Disk Utility should be able to fix it by erasing or partitioning, but you would lose the data on the drive.
    My mac pro started to see programs crash. First one, that wouldn't 'force quit', then a minute later a second. This had happened before last year, so i started quitting apps to restart. At the end, half of them i succeeded to quit and about 4 wouldn't quit. The finder was frozen/crashed, no dock or apple menu or any menu for that matter. The mouse moved. i could shortcut 'force quit' and 'return' on default OKs.
    You may have bad RAM, or other hardware problems. Have you run the extended Apple Hardware Tests. Boot from the install DVD while pressing "D". Try removing any non-Apple RAM modules.
    I tested the pins on the power adapter with a voltmeter, according to the schematic on the adapter itself and i got 5.5 V on the one side and 13 odd V on the other. Apparently what's supposed to be coming out. (5 V and 12 V)
    Some power supplies will put out more than the rated voltage if there is nothing attached, but 5.5 V and 13 V are not high enough to cause damage, anyway.
    Can a powerbutton shutdown shoot electricity through the FireWIre bus?
    No.

  • I recently updated the software on my MacBook Pro. Now, my computer no longer recognizes my external hard drive. Could this be related to the software update and, if so, how do I correct the problem?

    I Recently updated the software on my MacBook Pro. Now, my computer no longer recognizes my external hard drive. Could this be related to the software update and, if so, how do I correct the problem?

    Ari343 wrote:
    No, the external hard drive does not show up on Disk Utility. I don't have another computer to try it on.
    Perform a PRAM reset:
    http://support.apple.com/kb/ht1379
    Have you tried all the ports?
    Have you tried with a different cable?
    Have you tested all the ports with other devices to see that they are functioning?
    Ciao.

Maybe you are looking for

  • Execute Stored Procedure SQL Statement with Parameter from Cell

    I would like to know if there is a way to pass the parameters to SQL Statement of Power Query. For example, I have a SQL Statement as follows: EXEC [dbo].[spReportBuilder] @Report = N'Revenue Summary', @Year = N'2014', @Period = N'11' I would like to

  • Need help on Reading BFILE, CLOB

    Hi all i am using Linux fedora 4 i have created a directory create directory clob_dir as '/db10g/my_dir'; and created a table from examples of a book i have CREATE TABLE BFILE_DOC (     ID INTEGER,      BFILE_CLMN BFILE And a procedure to read a text

  • Best way to send files back and forth between PC and Mini

    I know something similar like this has been asked a million times, but I couldn't quite find the answer I need. Basically I work on the PC and my new Mac Mini, and I want to be able to quickly share files between both of them. I know I could use a US

  • Dashboards - Alert View Widget Column Width

    Hello, I am trying to create some Dashboards using the Alert Widgets. I am having problems with the column width. The default widths are not useful and take up to much screen space for a dashboard (example" Maintenance mode is really wide just for a

  • Installing Developer Suite

    I am new to Oracle Developer Suite and have just installed the product on a standalone Win XP Pro machine. However, I do not know how to "connect - username, password, database". I remember not completing the "network configuration" installation as I