HT201250 Recently upgraded my virgin Internet ie to super hub big mistake I cannot now use the time machine it will not connect to my apple

I recently upgraded my virgin Internet to super hub big mistake I cannot get hub to recognise the set up with the apple

Your download or install of the update may have been corrupt. Visit the Mac App Store and re-download the update or visit http://support.apple.com/kb/DL1726 and download the 10.9.2 update combo and re-install.
If that fails to solve the problem please post back and post a EtreCheck Report which you can locate at:
http://www.etresoft.com/etrecheck

Similar Messages

HT201250 trying to set up time machine, it will not connect to airport utility, inspite the wi-fi is very strong.

I have tried repeatedly to connect time machine to my air port utility, and keep getting the message that it was undetected. I have a strong wi-fi connection in my house and I just don't understand that it will not connect. Can anyone help me with this?

Power off both your Mac and the Time Capsule and wait a few minutes
Power up the Time Capsule first, and let it run 2-3 minutes by itself
Power up the Mac next and let it run a full minute.
Go into Time Machine Preferences again and see if you can select the Time Capsule as a destination for Time Machine backups. Do this by first removing any existing disks for Time Machine. Click Add/Remove Disk and remove the existing disk that is set up. Then repeat to select and add the disk again.
If still no luck, open Macintosh HD > Library > Preferences
Locate the com.apple.TimeMachine.plist file and move it to the desktop
Then repeat the complete the entire procedure above to see starting at the top, to see if you can select the Time Capsule for Time Machine backups.

Trying to setup airport for 1st time and it will not connect to internet, we also did not create a new network and cannot find this option again

Trying to setup airport for 1st time and it will not connect to internet?

You might try doing a reset of your AirPort unit. Use a pen or paper clip to press in on the recessed reset button while you plug it in, then continue to keep the button pressed until the status light flashes several times,
For more advice, please describe all your networking gear.

TS1559 Since upgrading my iPhone5 to the newest iOS (6.1.2) I can longer connect to WiFi. It sees the wireless network but will not connect.. Other devices in my home that weren't upgraded can connect just fine.

Since upgrading my iPhone5 to the newest iOS (6.1.2) I can longer connect to WiFi. It sees the wireless network but will not connect.. Other devices in my home that weren't upgraded can connect just fine.

I had the same problem. I did the reset networks on my iPhone & it did not work. My husband read somewhere that changing the channel on the router to manual & selecting the highest available channel number might help. I did that & it solved the problem. I have not had the problem since.

HT201250 I backed up my iMac with a "WD My Passport" using the Time Machine option and tried to restore my iMac but it only saved my applications none of my documents, photos nothing else! What happened?

I backed up my iMac with a "WD My Passport" using the Time Machine option and tried to restore my iMac but it only saved my applications none of my documents, photos nothing else! What happened?

There should be two sparse bundles on the TC, one for each Mac. If you click the TC in a Finder sidebar, you should see something like this (in Column View):
If you see the sparse bundle for the iMac there, but not on the window where you do a full system restore (after starting from your Recovery HD or OSX Install disc), they may be corrupted (especially if your iMac was failing at the time of the last backup).
Try repairing those backups, per #A5 in Time Machine - Troubleshooting.
Then try the full restore again, per Time Machine - Frequently Asked Question #14. Note that if you suspect problems on the most recent backup, you might want to select an earlier one.

I recently purcased a Roku which I connected via WiFi. Was unhappy with it so disconnected all. Since that time my Ipad will not connect to the internet. Any suggestions?

I recently purchased a Roku which I connected via WiFi. I was unhappy with it so disconnected everything. Since that time my iPad 1 will not connect to internet although in "settings" it indicated that it is connected. I turned off the WiFi for 30 seconds as was suggested but still the iPad won't conect. Anybody have suggestions as to what might provide a "fix"?

I wonder if the roku changed some other settings in your router or pad.
Recycle the router. Thurn it off for a while, then restart.
On the pad, forget your exiting network. This will cause it to search for avaialbe, and reset again. You will likely need to redo any password/ security entry.
Lastly, in settings, general, reset network connections. You will not lose anything.

My new iphone4 connected to the internet fine at the store today, but will not connect to my wifi at home - it sees the guest network, but does not give me a place to enter the password

I just got a new iphone 4 (my first one) and the internet worked great at the store, as well as in the parking lot at the grocery store on the way home - yes I was playing with it! Anyway, now that I'm home and the store is closed, it won't connect to my home wifi. It sees the guest network, but it doesn't give me place to put in the password, so I'm not sure if that's why it won't work. Also, I don't know what settings to put in for the screen that comes after the network choice screen - it has IP Addresses with DHCP, BootP, and Statis (I don't know what any of these are or mean!) It also has a 'renew lease' button that I have no idea what to do with, and it has a section with HTTP proxy that is highlighted "off" but also has 'manual' and 'auto' options - maybe these are not set correctly?
Very frustrating that there is no manual, and the website doesn't really help with this at all. Thanks so much!

If you look at the top left of your screen you will either see a 3G (or 4G if you have AT&T) or you will see the wi-fi symbol. If you don't see the wi-fi symbol you are connecting to Gmail through your cellular data plan, not via wi-fi.
To answer your question, it doesn't happen often but when it does the steps I mentioned above will normally resolve it. Hopefully you won't have any further problem with this.

Ipad wifi is connected but when i try to use the internect it says its not connected to internet but shows connection

I connect on my ipad to my wifi and it sows good signal strength but when i try using the internet it says it cannot because it is not connected to the internet.

Have you tried rebooting your router - unplug it for about 30 seconds and then plug it back in? Is this a new problem? Have you been able to connect to your home WiFi before?
This WiFi assistant set up article might help.
http://www.apple.com/support/ipad/assistant/wifi/
More troubleshooting help is available here.
http://support.apple.com/kb/ts1398

Mac Book Pro 13" LPTP-Photo Booth Recorded Video File won't find my video/movie that I recently recorded from Sun 9-1-13. Is there a way I can retrieve the files under the Time Machine or will I need to download something for iPhoto Booth?

I have been having the most difficult times with the use of iPhoto Booth for recording movie files of church services. It seems if I make a rename on the files, for some odd reason, I cannot find it in any of my Files Folders in Finder. I need to know is there a more simple way to retrieve movie files thru iPhoto Booth or is there something I may can download to fix this issue? Also, is there a way the videos can be flipped around to not a mirror image, but to a reverse camera? Please anyone who recognizes this problem, contact me ASAP. Thank you for your support!

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

I upgraded PSE12 to PSE13 on my W7 64bit PC. I cannot now use my Twain Plugin for scanning.

I have discovered from the forum there is no 64 bit Twain Plugin, so I cannot scan using my Canon PIXMA PG6350 Printer/Scanner which I had been using in PSE12.
If I uninstall PSE13 , how can I reinstall as a 32 bit version.
Ant help would be appreciated.

Hi,
On a 64-bit setup, only 64-bit version of PSE13 would install.
Thanks
Andaleeb

New Airport Express will not connect to internet

I am attempting to upgrade from an old Airport Base Station (the gum drop/flying saucer/mushroom model) to the new and improved mini tower model. I plugged the ethernet cable from the comcast cable modem in and nothing worked - no wireless, no internet, no nothing but flashing amber light. I was able to configure a new wireless network, and it shows up on MBPro running Maverick and iPad using Airport Utility as a functioning wireless network (with the green light on the AE), but it will not connect to the internet. Any suggestions?

The only step that appears to be missing is to reset your cable or DSL modem. Unplug it and let it rest a moment or two, then power it back up again: http://support.apple.com/kb/HT2460
You've done everything right, but still can't connect to the Internet. Why?
It is likely that the modem locked onto your iMac, and it will ignore anything else you plug into it until the modem has been reset. If you were to plug the iMac back into the modem, it would still connect to the Internet.
Fortunately, resetting a broadband modem is usually very easy -- just unplug its power supply, wait a moment, and plug it back in. After its indicator lights have gone through their startup routine, you should do the same to the AirPort base station.
Odds are that you can connect to the Internet now.

After updating to Firefox 3.6.15, Firefox will not connect to the Internet, even after uninstalling and re-installing Firefox in my Windows XP environment.

After downloading the Firefox 3.6.15 update, my problems began. Firefox would not connect to the Internet. When I rebooted my PC, Firefox said that it couldn't access any Web sites. I uninstalled Firefox, then downloaded and installed Firefox 3.6.15. I still have the same problem: Firefox will not connect to the Internet. I am running Windows XP, service pack 3. I never had problems with Firefox until I installed version 3.6.15.

I have XP Pro. I tried installing 3.6.15 and could not open it. I did a system restore and 3.6.14 would no longer open. I tried again installing 3.6.15 and got a message that the previous version had not uninstalled properly. Tried uninstalling.
As a precaution I used MozBackup to save my bookmarks etc. and also saved a system restore point.
I then clicked Start, My Computer, drive C, Program Files and deleted the Firefox folder.
I installed 3.6.15 and it is now working fine with all my bookmarks and addons loaded automatically.

PowerMac G4 will not connect to the internet via ethernet

I am normally a very mac savy person, but I cannot get this to work...
I have an Airport Express connected to speakers, a USB printer and an ethernet hub, which is connected to a cable modem and also a PowerMac G4 via ethernet. There is also a wireless iMac thrown into the mix. All hardware has up-to-date software.
The wireless iMac gets online, prints and plays music wirelessly.
The wired PowerMac G4 will not connect to the internet via ethernet, it is killing me.
I have gone through all the settings and cannot figure this one out. I really appreciate all advice.
Thanks,
G4 Mac OS X (10.4.8)

Hi pradagirl,
Welcome to Apple Discussions!
Leaving the other peripherals out, tell us the connection sequence from the G4 outbound.
Also, you might gain more insight at the Networking Forum
Regards,
John
G5Dual 2Ghz  23" ACD  iSight Mac OS X (10.4.8)  20" Intel iMac 

Itunes will not connect to the internet

My sister just downloaded Itunes to her computer for the first time and it will not connect to the internet. Her phone is in restore mode and I dont know what to do now. It says the server timed out as soon as I try to do anything on itunes. My internet on the computer is working fine....any suggestions?

- What version of iTunes are you running?
7.1.1.5
- What is the exact error message you're getting?
itunes could not connect to the itunes store. The network connection has timed out.
Make sure your network settings are correct and your network connection is active, then try again.
- Do you have any other privacy filter installed, or any antivirus or antispyware software?
You know, I was just looking again after I read this, and it appears there is a program (Check Point Integrity Client) that could be causing an issue, but I'm not sure what IP address I would need to put in there.
- Can iTunes connect to Gracenote to get album names when you import from a CD?It cannot.
It would probably be useful if you'll run the Network Diagnostics (choose the Run Diagnostics item under the iTunes Help menu) and post the results here.
Network Connection Information
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Connection attempt to iTunes Store was unsuccessful.
The network connection timed out.
Secure connection attempt to iTunes Store was unsuccessful.
The network connection timed out.
Thanks.

4 Beta will not connect to internet on any of my PC's

For humor, 4 Beta has made Firefox unusable on my 64 bit XP-pro machine and my 32 bit XP Atom processor machine. I must write this on MS Explorer...
PROBLERM: Installed on two machines. Will not connect to internet.
WARNINGS: "This Operation cannot be completed. A secrue network communication has not been cleaned up correctly. "
OPERATION: Starts up, checks for settings, will not connect to internet as evidenced by 1> no website is displayed, and 2>

When I try and open it, windows puts up a box saying that windows 7 has a problem with Safari and will not open?
Fingers crossed, your Windows 7 will have been recording some additional information about those.
First, open your Action Center and expand "Maintenance". Click "View reliability history":
Once the reliability report has been generated, look for Critical events for Safari generated at the time of the "Safari has stopped working" messages. Doubleclick the name Safari in the critical events. (Don't click View solution.) Here's a screenshot showing what to doubleclick:
You should see something that looks like the following screenshot:
Copy and paste the contents of the problem report into a reply here. For example:
Description
Faulting Application Path: C:\Program Files (x86)\Safari\Safari.exe
Problem signature
Problem Event Name: BEX
Application Name: Safari.exe
Application Version: 5.34.55.3
Application Timestamp: 4f6ba239
Fault Module Name: StackHash_7100
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 7d3a1240
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2057
Additional Information 1: 7100
Additional Information 2: 710027e7a8d30022e5e0ee529f40121f
Additional Information 3: 5158
Additional Information 4: 5158ee4164428f7b514a5e7ee9654f7c
Extra information about the problem
Bucket ID: 2871481836

HT201250 Recently upgraded my virgin Internet ie to super hub big mistake I cannot now use the time machine it will not connect to my apple

Similar Messages

Maybe you are looking for