HT201250 Time Capsule Problems - Flashing Amber

Hi, I just purchased Time Capsule to use as a storage device for Time Machine. This was my first attempt to use Time Machine. I tried connecting via AirPort, but ultimately couldnt get the restart to work...so i just went with the ethernet cable. I believe its working (i can see the back-up'd files in Finder), but the light continues to flash amber. Problem? How do i fix it?

See:
http://support.apple.com/kb/ts1589

Similar Messages

Time capsule status flashes amber

Hey Fellow Users,
Just the other day I replaced my modem and since that my Time capsule is flashing Amber!! Do I need to install my time capsule again with the CD due to having a new modem? I have tried unplugging the caspule and it's still amber.
Your help would be much appreciated!
HunkaLove

Have performed the complete power cycle.
Turned modem off & time capsule. Then started them up one by one waiting a minute!
Nothing has changed though, my time capsule is still flashing amber & when I enter the Time Capsule preferences it tells me that the back up disc is unavailable!
My Airport does not have an option for manual set up! My internet connection is all fine though! It is the time capsule not recognising the new modem!
I tired connecting an Ethernet cable from my mac to my time capsule, switched the wireless off, opened up Airport Utility again & no manual setup!!
Can I re install the time capsule or will I lose what I currently have on there?
I will go into Apple on Monday to get the issue resolved!
Thank you for all your time & help!

My new Time Capsule 500gB flashes amber and I can't get in contact

I can't get in contact with my brand new Time Capsule!
A network is running, both wireless and ethernet. Both my Apple TV and the desctop PC (which i'm using now) can go on the internet, but I can't make any changes using Airport.
When startin Airport it finds the Time Capsule, and it seems like it also has been updated, but when I try to go "Next" or use "Manual" button I got an error after a few seconds with the code 10057. An error occured when it tried to get in contact with the wireless unit.
It still flashing amber, what can I do?
I hope some of you can give me an advice?
Best regards
Soren Sorensen

Connect it to your computer, open iTunes, select the iPad under Devices in iTunes' sidebar, click on the Restore button.

After a recent power outage, my Time Capsule is flashing amber

Time Capsule model A1254. 500 GB. After a recent power outage TC started to flash amber. I unplugged it for about a half hour and replugged it. Still can get on the internet but amber light still flashes. I unplugged and replugged it and the modem several times. Can I just ignore this?

I'm not sure how large a hard disk I need to back up the data on Time Capsule.
500 GB at least to be safe. A larger drive can be used if you wish.
do I just put the USB into the USB port at the back of TC?
1) Make sure to obtain a hard drive that is formatted specifically for Mac.....not a PC.
2) Connect the drive to the USB port on the Time Capsule
3) Use AirPort Utility to Archive the data on the Time Capsule to the hard drive
To do that, open up AirPort Utility and click Manual Setup as before
Click the Disks icon at the top of the AirPort Utility window
Click the Disks tab just below the Disks icon
Click Archive
Click Archive again to confirm the action
Screenshots have not been appearing correctly on the Apple forums of late, so hopefully the images will appear below.
This will take a long time....possibly up to 4-5 hours depending on how much data is on the Time Capsule disk.
If you are uncertain about the Archive procedure, I would suggest that you take the Time Capsule to an Apple Store or servicer and ask them to perform the Archive for you.

HT201250 time capsule problem with comcast

I have tried to Power down and back my Comcast cable modem and my Time Capsule and still can't connect to my T.C. wirelessly anymore.
I swiched from AT&T 2wire -----> Time Capsule
To: Comcast's SB6141 -----> Time Capsule
Thanks

Here is the power sequence for cable modems and routers.
Router - Time CapsulePower off.
SB6141 - Cable modem
Power off.
Wait 30 seconds
Power on and wait for all lights except the bottom one which would be your T.C.
Router - Time CapsulePower on
There is nothing to configure on your SB6141 cable modem. You might try a different Ethernet port in the rare possibility that the current port has gone bad. These are rock solid cable modems. Have the single-port SB6121.
You will need to run Air Port Utility. My Internet connection screen is set to Share a public IP address. And on the Internet tab, Configure IPv4 Using DHCP. Let the cable modem populate all the addresses on this screen and the DNS servers. Set up your LAN within the DHCP tab. I used 1 day for the lease. In Advanced -> IPv6, it is set to Link-Local only.
I gave my Airport Extreme a Name and intense password. Setting time automatically. Did not allow setup over WAN. Wireless Mode is Create a wireless network. Radio channel selection is automatic, and WPA2 security is up. I am running two wireless networks: 2.4Ghz 802.11a/n - 802.11b/g/n, and a 5Ghz with wide channels.
Don't forget to update the Time Capsule.
In System Preferences >Network, you may want to remove the wireless service and recreate it. On the Wireless > Advanced Screen, you will want to add the Time Capsule SSID to Preferred Networks, and select Remember networks this computer has joined. Then Apply.
If all of this hasn't helped, ask Comcast to ping your cable modem and see if there are any network issues between you and their head end. Occasionally, Comcast gets DNS amnesia and nothing works until they restore it.
Hope this helps.

HT201250 I am having trouble setting up my time capsule. the amber light is flashing. i have a Verizon FIOS network that i use for the internet (WiFi) and do not want to configure the Time Capsule to do that function. I just want the Time Capsule to ba

I am having trouble setting up my time capsule. the amber light is flashing. i have a Verizon FIOS network that i use for the internet (WiFi) and do not want to configure the Time Capsule to do that function. I just want the Time Capsule to back up.

Simple.. bridge the TC.. in the apple utility in the NAT and DHCP area.
Plug it into the FIOS router.. you can turn off wireless in the TC if you want.. or use it.. it can work faster if you are nearby and can select 5ghz.. but up to you.

Changed AppleID p-word and now can't login to icloud on mac mini. I use correct password and I get spinning grey wheel. I know it's the correct password cause any other p-word gets error message. Also, my time capsule is blinking amber.

Changed AppleID p-word and now can't login to icloud on mac mini. I use correct password and I get spinning grey wheel. I know it's the correct password cause any other p-word gets error message. Also, my time capsule is blinking amber. I've reset my password a few times and it doesn't help. Also have shut down completely and unplugged everything to no avail.

Hey jamesarm97 & diegofoto,
On August 21st, some users may have been unable to access iCloud services for a short period of time. Apple worked quickly to resolve these issues, however you two may have experienced them. To check the current status of these systems please see:
Apple - Support - System Status
http://www.apple.com/support/systemstatus/
If either of you are still experiencing issues, you may want to troubleshoot with the following articles:
iCloud: Troubleshooting web browser issues with iCloud.com
http://support.apple.com/kb/TS4050
iCloud: Account troubleshooting
http://support.apple.com/kb/TS3988
Thanks,
Matt M.

My time capsule is flashing yellow. what does that mean

my time capsule is flashing yellow. what does that mean?

It needs attention. Determine the reason by using AirPort Utility. It's in your Mac's Utilities folder.

Time capsule has flashing orange light? Anyone help please?

Time capsule has flashing orange light and iMac is saying 'backups delayed'? Anyone help please?

Just do a reboot of the TC to start with.. followed by a full network restart.. ie with everything off.. power on in order.. modem.. TC.. clients with 2min gap.
If that doesn't fix it.. you should do a reset of the TC and set it up again.
Tell us more if you still have issues.
Full network layout.
OS you are running.
Firmware on the TC.

HT3275 the light on my time capsule keeps flashing orange and green. I know it is supposed to be green how can I get the green light to stay on

the light on my time capsule keeps flashing orange and green. I know it is supposed to be green how can I get the green light to stay on

Orange and green flashing is unfortunately a failure indication.
How old is the Time Capsule?

I am having problems reestablishing my Time Capsule. I had to get a new internet modem and that seemed to screw up my Time Capsule. The amber light keeps blinking and it's not being picked up when my Macbook scans or when my PC scans for the wireless ne

I can't find my Time Capsule on my networks anymore. It's like it doesn't exist. We got hit by a storm and that might have caused our internet modem from ATT to fry. I replaced the modem today but now my Time Capsule isnt working. It's blinking amber. The PC its connected to through the ATT modem isn't finding it as it scans and its not in utilities. My MacBook isn't finding the time capsule either when it scans. Whenever I hooked up all the wires to the time capsule and the modem, the internet stops working. I've tried resetting the time capsule but it's still blinking. I had all my computer equipment on a power surge protector. A pretty good one. All my other equipment is fine. The ATT modem was old, so I thought it might not have even been the lightening. Nothing else in home was injured by storm. I am freaking out and need help!!! I can't use my MACbook to do my internet work and all my files were backed up on the time capsule.
Another problem. My Time Machine isn't backing up now either. What is up with that?
I would be soooo grateful if someone can help me! Thanks a million!

A PC can have more issues connecting than a Mac.
But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
Important thing is to get access to the TC.
The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
http://support.apple.com/kb/DL1482

Very annoying Time Capsule problem - Not responding

Hi,
I have a really annoying problem with my Time Capsule and/or network setup. Although I did huge research on this matter, I still have no solution for the problem, nor any more ideas how to get rid of this misbehavior.
First of all, I would like to introduce a draft of my current network setup with all included clients, switches and routers:
As you can see, I have 3 Apple computers, 1 Windows 7 client, a Canon MX895 network printer, the said time capsule and an AVM Fritz!Box WLAN Router for internet access.
Both MacBooks are WiFi connected to the Fritz! which serves as the central WLAN accesspoint with simultaneous 2.4/5 GHz. The interconnection between the Fritz! and the Time Capsule is a wired 100MBit. Also it manages the IP adresses via DHCP enabled.
The Windows PC, iMac and MX895 are directly connected to the remaining 3 network ports of the Time Capsule. The Time Capsule is a 2ng gen one equipped with a Samsung 2TB drive. WiFi on the Time Capsule is disabled. Firmware is 7.6.3
And here is the problem description:
After adding the Time Capsule to the network, there was no problem configuring it as a switch with Time Machine sharing available to the 3 Macs. Everything worked as expected... until...
...the Time Capsule does not respond any more. In more detail:
The LED of the capsule is still green, not blinking or amber!
I can access the capsule with Airport Utility but as soon as I try to do a remote restart, the Time Capsule is not responding any more.
First I thought: "Okay, probably there has happened something" but I didn't care much about it and did a restart by pulling the power cord out and plug it back in after some seconds. Then it seems to work again... for some hours/days...
...then it happened again:
My MacBook's Time Machine tells me that "the network drive does not respond", "...does not exist" or "...identity has changed". It seems to happen randomly, I don't have a clue what is causing this!
What I have tried to fix this:
Tried another Time Capsule (1st gen) with the same hard drive
Tried this 1st gen with another Samsung 2TB HD
Reset the 1st and 2nd gen TC and started with fresh backups
Tried different TC settings, like transfering DHCP from the Fritz! to the TC, fixed IP
Reset the complete Time Machine settings on all Macs and configured it again
At the moment I'm trying, if a specific Mac in the network causes the issue by disabling the automatic Time Machine backups. I checked the TC log with the old Airport Utility - there is no error.
I know, this is a bit strange and maybe I make some mistake, but I don't know what to do next. Maybe someone has an idea or can give me a hint what to try.
Any help is very appreciated.
Thanks
Alex

I don't see anything wrong in your setup.
Unfortunately I think this is just network bug in mountain lion and the TC.. this is fairly common that the two will lose connection and a reboot will get things perked up again for times varying from a few hours to days or weeks.
I don't have a bug killing solution either sorry to say.
Let me recommend a few things.
1. Do not use 7.6.3 firmware on those old TC.. go back to 7.5.2
It has proven much more reliable. Do a factory reset after you flash back and redo the setup from scratch.
2. Names on the TC for network sharing to be kept short, no spaces pure alphanumeric. Do not use apple type names with spaces and particularly the apostrophe.
3. Whichever is running dhcp.. it should normally be the Fritz though, set dhcp lease to a very short time.. eg 30min. This will get the lease renewal faster and hopefully keep the ARP tables in the computers updated.
4. But even though the TC is in bridge it should have a static IP address. That can help so you can link not just to the TC by name but also by IP address. The static IP is better handled by the Fritz though via fixed host type setting.. I am sure the fritz offers that.
5. Just as a matter of interest why keep the link between the fritz and the TC to 100mbit.. both can do gigabit? It has nothing to do with the problem and there is nothing in the current setup that needs more than 100mbit link unless you are getting super speed on the 5ghz from the fritz.
Your post and picture of network are excellent.. helps when you are so clear.

Airport Time Capsule Problems Since Snow Leopard - Loses Connections

I did a straightforward install of Snow Leopard on the iMac 24 and it went fine. I have very few apps on it so nothing weird running to cause two issues:
1 - Time Machine backups to a Time Capsule have become slow and unreliable. Also, even 10-100 MB file transfers to a MacBook Pro 17", also on Snow Leopard, took the longest time.
2 - The Airport/WiFi icon will often go from being a static icon with full signal to one in which each curved concentric level bar flashes one by one up from the bottom dot to the topmost arc, and then back down, and back and forth. This often happens in the middle of Time Capsule backups. Holding down the mouse on the icon shows my network still connected, but the backup fails, and any web page attempted will also report there is no network.
I wonder if others have had similar problem(s).
Imran

I am also having very strange problems with 10.6.1 and TC. The network disconnects for no apparent reason, frequently. It seems to be tying up both of the phone lines too, because once the TC reconnects to the network, the telephone no longer works (it says "line busy" and remains that way until and unless I unplug the TC). Plugging directly into the cable modem works fine, no problems at all with the telephones or with the network disconnecting at random. All three macs on my home network (macbook, MBPro and iMac) are updated to 10.6.1. At first I thought the problem might have been the modem itself but it works fine; it's only when the TC is connected that the weirdness happens.

Trying to hook up my time capsule. Plugged in the eithnet from the extreme over to the time capsule--then plugged in the time capsule--still in amber blinking light--went back to extreme and works fine--reset the cable modem in between but that did not f

Hoping someone can help with setting up my new time capsule. I am just switching from my extreme to the time capsule. I can not get the time capsule to go anywhere but to amber blinkiing. I can go back to the extreme and interenet works fine.
Here is what I did:
plugged in the ethernet cable from the cable modem
plugged in the time capsule power
Just cycles to amber blinking -- no internet connection
Tried pulling up the airport utility but it just shows my old extreme configuration and says that it is not supported anymore. Do not see how to display info on the flashing light.
I have gone back to the extreme three times and it seems to work fine.
I also repowered the modem in between trying to get the time capsule to work

Is this a cable modem? It has to be off for at least 20min and sometimes much longer before it will give up the old settings. You might even need to power down the cable modem overnight.
Tell us exactly what broadband you have with what ISP and exact model of modem..
The new TC cannot be setup without using the latest airport utility 6.3.1 or 6.3.2 and you need Lion - Mavericks to use it.
The computer also needs to have ipv6 setup to local link on whatever you are connecting with, wireless or ethernet.

My time capsule stopped working. amber light comes on for a few seconds then turns off.

my time capsule stopped working. When I try to power it up the amber light comes on for about 10 seconds and then turns off. That's as far as it gets. Any ideas on how to solve this problem.

Kazandjaz, Welcome to the fourm! There is a 99.5% chance that your problem is caused by a failed internal power supply unit (PSU)! If you have operated it for about 18 months or so, that is the cause. Take it to your nearest Apple dealer and ask them to check it out.

HT201250 Time Capsule Problems - Flashing Amber

Similar Messages

Maybe you are looking for