HT201250 Time Machine backup then install new SSD HD + Pulling files from Time Machine from 'old' HD

Hi Guys,
I currently have a mid 2009 Macbook pro and I decided to upgrade the current HD in it to an Intel 330 SSD. Which might I add was a *gongshow*.
Anyways before I did the switch I used Time Machine to back up all my information, and to be double redundant I backed up the REALLY important information on a 8gig flashdrive.
The removal and reinstall of the new drive went smooth, and once lion was installed I did all the usual system updates.
Once it came to importing files from Time Machine is when my hassle started.
The last backup I did on Time Machine with the old HD still installed was at 10:00 this morning.
I had the new SSD up and running and a new backup of that created by 1:00 (3 hours later).
When I loaded up Time Machine to grab some files off of my 10:00 backup, it would not let me. The current backups have a Grey/Silver snapshot, and the backups from the OLD HD were blacked out and I could not click on them. What can I do to get these files off my Time Machine from the old HD?
Thanks

Quick followup question,
If I do a migrate with the time machine will the system be updated to the version I had when I made it (10.8.6 I think) or will I have to do the system updates afterwards. If so, will that cause any clashes when applying the time machine migration?

Similar Messages

  • Question about restoring from Time Machine backup because of new SSD

    Hi,
    I have a 15" Late 2011 MacBook Pro running 10.10.1 with a Toshiba hard drive inside. I want to replace the Toshiba HDD with a Crucial MX100 SSD. I use a Time Capsule to backup. After I install the SSD, I would want to restore my data to the new SSD using my Time Capsule, but I have a few questions:
    1) My Mac shipped with OS X 10.7; My Mac is running OS X 10.10.1; Should I use Internet Recovery to start the restore (even though when I start OS X Internet Recovery it will download 10.7 recovery), or should I use a USB drive to start Recovery?
    2) After booting into Recovery, do I format/partition the SSD into 1 partition, GUID partition table, Mac OS Extended Journaled, etc before restoring using Time Capsule?
    3) Do I need to use Trim? Please tell me your opinion on the OS X Yosemite and Cindori Trim Enabler controversy.
    4) How do I install Recovery HD on my new SSD?
    5) Please tell me all tips you have about this entire process.
    Thanks,
    Mike

    The ability to load OS X Internet Recovery is provided by firmware independent of the SSD. Just make sure your MBP has the latest firmware, which was released years ago.
    You won't need a separate step to install OS X. Answered more completely in (2).
    Merely format the SSD Use Mac OS X Extended (Journaled) and as many partitions as you desire. One is sufficient.
    Only Crucial can answer that. You might be better off purchasing a SSD from a company known to support Macs, such as OWC / MacSales. I have several of their SSD products and haven't had to devote a moment of thought to Trim.
    That's done by virtue of the Recovery firmware. It will recognize that no Recovery partition exists and will create one, after which you won't have to use OS X Internet Recovery (though it will remain an option).
    If you obtain your SSD from OWC that's really all you need to know. Mechanically, it's not much more complicated than installing memory. As far as recovering the original HD's contents, restoring from the Time Machine backup is also straightforward. TM doesn't know and doesn't care that it's a SSD.

  • During upgrade to Lion on Macbook Pro the upgrade stops at OS utilites after rebooting asking to restore from time machine backup or install new copy

    My Daughter is currently upgrading her MacBook Pro to OS X Lion.  During the upgrade the system rebooted and then stops at the OS X Utilites menu.  I have installed this same upgrade on My MacBook Pro and the family iMAC without issue.  Did the upgrade encounter a problem?  The only options are to Restore from Time Machine Backup, Reinstall Mac OS X, Get help, or Disk Utility.  
    I'm not sure how recient the backup is on the TimeMachine for her system and she is concered that she may loose a lot of updates she has made to iTunes and iPhoto.  
    Please help.

    I have 8 GB of RAM, but would that even matter during install? Performance once installed and running sure, but I questiong whether the installer would demand that much more, or why it would affect mountain lion when restoring from a time machine backup.

  • I am getting error "The disk is used for Time Machine Backup" when installing the new OSX Mountain Lion upgrade"

    I am keep getting this error "The disk is used for Time Machine Backup" when installing the new OSX Mountain Lion" when doing the upgrade to newly OS.

    The folder would be at the root of your hard drive. Double-click Macintosh HD and look there.
    If it isn’t there, I’m not sure what it is seeing.

  • Can I transfer a Time Machine backup to a new empty hard drive, without installing Mountain Lion again?

    Can I transfer a Time Machine backup to a new empty hard drive, without installing Mountain Lion on that new hard drive?

    Yes - I just did it the other night. Took five hours, but it finally finished and is working great.
    I sort of followed the instructions found here -->> http://pondini.org/TM/18.html.
    Also, if you want to have dual backups, see -->>
    http://pondini.org/TM/27.html.
    I say 'sort of' because I used Carbon Copy Cloner to do a block-level transfer. I just didn't want to get hung up with a Finder copy.
    Give CCC a try - you have to enable the block copy in Preferences before using this method, but I was quite happy with it. I used it to move over 1TB of TM backups from a FireWire 800 drive to a 2TB Thunderbolt drive. 5 seconds short of taking 5 hours.
    It should work well for you.
    Clinton

  • HT201250 when restoring a time machine backup to a new computer, does it affect the new operating system on the new computer

    when restoring a time machine backup to a new computer, does it affect the new operating system on the new computer?

    That depends on how you do it.
    By far the best, easiest, most reliable method is to use Setup Assistant when your shiny new Mac first starts up, to transfer your apps, users, data, etc.   That doesn't disturb either the OS or basic Apple apps that came with the new Mac.  See Using Setup Assistant on Mountain Lion or Lion.
    There is a facility to restore an entire system from Time Machine backups, including the version of OSX on the backup, but that's for use when your internal HD has been erased or replaced only.  It's not a good idea to restore the full backup of one Mac to a different one.  Depending on the circumstances, the installer may not allow it.  Even if it does, the Mac may not start up, or may kernel panic, or not work properly.

  • HT201250 existing Time Machine backups to a new Mac

    how do i migrate existing time machine backups to a new mac from my time capsule?

    It took a little more research, but that link in the end solved my problem.  After mounting the Time Capsule and the previous backup sparsebundle, I ran these commands to inherit the old backup (with <capsule> and <machine> representing the names of the Time Capsule and machine/hard drive respectively:
              sudo tmutil inheritbackup /Volumes/<capsule>/<machine>.sparsebundle
              sudo tmutil associatedisk -a / /Volumes/Time\ Machine\ Backups/Backups.backupdb/<machine>/2012-12-09-114511/<machine>
              sudo tmutil setdestination /Volumes/<capsule>/
    "2012-12-09-114511" was the latest snapshot that was there.  According to the documentation, you can pick any snapshot, since the "-a" in that command will update all of the associated snapshots.

  • I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the b.u. stops

    I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the backup stops. The system preferences are set to "Never" for Computer sleep and Display sleep. The computer does not ordinarily log off automatically, but it has done this twice since I started the Time Machine backup.

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
    If all you see are messages that contain the word "Starting," you didn't clear the search box.
    If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Some personal information, such as the names of your files, may be included — anonymize before posting.

  • Unable to restore time machine backup onto a new hard drive

    I recently bought a new hard drive for my mid-2010 white Macbook. I have kept this computer regularly backed up with time machine, but just to be sure I made sure I hooked up my external hard drive prior to changing the hard drive and made sure it was fully backed up. I checked my exceptions and saw that my system files and applications were listed, so I removed them from the exceptions list and let it back up again (it only backed up a further 60MB though, so that made me a little uneasy).
    I successfully switched over the hard drive and then plugged in my external hard drive so I could do a restore from Time Machine. My external hard drive has 3 partitions: 2 time machine backups for each of my computers, and one partition for storing files that also has an old copy of 10.6 on it.
    When I booted the computer, I held option, then selected Macbook TM. When it came to the window with 4 options, including disk utility and restore from time machine backup, I selected restore from Time Machine backup. When I did so it said "No OS X Backups Were Found." Why wouldn't it have backups listed if I have been consistently backing it up? How else do I do a full system backup?
    Also, how can I be sure that I'm restoring this backup onto the new hard drive? It didn't prompt me to select that drive at any point, and I want to make sure I'm not overwriting the middle partition on the backup drive (or anything else).

    Please visit Pondini's Time Machine FAQ for help with all things Time Machine.
    You will find that Mountain Lion stores an invisible copy of the Recovery HD. You can boot from your Time Machine backup drive by restarting with OPTION boot:
    Boot Using OPTION key:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the "OPTION" key.
      3. Release the key when the boot manager appears.
      4. Select the disk icon for your Time Machine backup drive.
      5. Click on the arrow button below the icon.
    Your computer should boot into the Recovery HD. You will be presented with a main window of options. Select the option to restore from a Time Machine backup then click on the Continue button.

  • How Can I Migrate My Time Machine Backups To A New External Hard Drive?

    I have a external hard drive that has 500 GBs left, but I want to buy a larger drive.

    ivan wrote:
    How Can I Migrate My Time Machine Backups To A New External Hard Drive?
    I have a external hard drive that has 500 GBs left, but I want to buy a larger drive.
    Hi iVain
    Fire up *Disk Utility*, click the Restore tab, then drag your old and new TM drives into the Source and Destination fields. Click Restore, and a complete copy of your old TM files will be made on the new drive. Go to TM preferences and select the new drive, and it will continue backing up just as it left off.
    Hope this answers your question. See:
    http://discussions.apple.com/thread.jspa?threadID=2595485&tstart=0

  • Restoring from a Time Machine Backup on a new Hard drive

    Hi,
    I have a late 2009 iMac and I had the HD replaced (it was included in the recent HD recall).
    Before I had it replaced, I made a backup using my time capsule and it was on the latest version of Mountain Lion.
    My question is, since I have to install the OS using the original install discs which was Snow Leopard, if I use the restore from Time Machine using Mac OSX Utilities, will my Mac restore my Mountain Lion backup (and have everything like it used to before I had the HD replaced)? Or do I have to reinstall Lion then Mountain Lion then restore from there?
    It would be a pain to re download everything.
    Hope someone can help me out.
    Thanks in advance

    Please visit Pondini's Time Machine FAQ for help with all things Time Machine.
    You will find that Mountain Lion stores an invisible copy of the Recovery HD. You can boot from your Time Machine backup drive by restarting with OPTION boot:
    Boot Using OPTION key:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the "OPTION" key.
      3. Release the key when the boot manager appears.
      4. Select the disk icon for your Time Machine backup drive.
      5. Click on the arrow button below the icon.
    Your computer should boot into the Recovery HD. You will be presented with a main window of options. Select the option to restore from a Time Machine backup then click on the Continue button.

  • How does one SUCCESSFULLY transfer Time-Machine backup to a new (larger) hard disk drive using OSX 10.5.8

    I have read a number of articles about how to transfer a complete Time-Machine backup to a new (larger) hard disk-drive.  Some of these articles are specifically for OSX10.6 users, which are not applicable to me since I am operating with OSX 10.5.8.
    However, I have tried several times to use the Disk Utility 'Restore' function, dragging my old time-machine volume into the 'Source:' box and my new volume into the 'Destination:' box.  This works, of sorts, BUT the newly created volume on the new larger hard disk-drive remains the same size as the original volume on the old Time-Machine HDD, with no apparent way of increasing the new volume's size.  So I am not really any better off:
    E.g. the total capacity of my new HDD is stated by 'Disk Utility' to be 465.8 GB, of which I'm told 228.2 GB is used for the Backups.backdb folder, but only 4.6 GB of free space is actually available.  Yet under the 'Partition' tab of 'Disk Utility' it tells me that there is still 236.4 GB of available space.
    Does anyone know how to resolve this issue without upgrading to OSX 10.6?

    First, how did you prepare your new drive?  See:
    Drive Preparation
    1.  Open Disk Utility in your Utilities folder.  If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    If you plan to partition this new drive then be sure you create a larger partition for TM than your old volume.
    Next, clone your old TM volume:
    Clone using Restore Option of Disk Utility
    1. Open Disk Utility from the Utilities folder.
    2. Select the destination volume from the left side list.
    3. Click on the Restore tab in the DU main window.
    4.Check the box labeled Erase destination.
    5. Select the destination volume from the left side list and drag it to the Destination entry field.
    6. Select the source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.

  • Failed resting from Time Machine backup on a new HD

    Is anyone here dealing with a problem of full restoration from time machine on a brand new HD on MacBook Pro?
    I follow the full procedure:
    - did a complete backup of old HD with TM
    - started the PC with http://support.apple.com/kb/DL1433 Lion recovery Disk Assistant
    - formatted HD with disk tool
    - launched the restoration from time machine
    - restoration move very very slowly and @ certain point of time crash (after some % of process)
    I did several attemps doing in different way the backup and restore but no way.
    I'm gonna do a full image and restore the image. Not good for a promising backup system!!
    Some suggestions?
    thanks Matteo.

    Please visit Pondini's Time Machine FAQ for help with all things Time Machine.
    You will find that Mountain Lion stores an invisible copy of the Recovery HD. You can boot from your Time Machine backup drive by restarting with OPTION boot:
    Boot Using OPTION key:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the "OPTION" key.
      3. Release the key when the boot manager appears.
      4. Select the disk icon for your Time Machine backup drive.
      5. Click on the arrow button below the icon.
    Your computer should boot into the Recovery HD. You will be presented with a main window of options. Select the option to restore from a Time Machine backup then click on the Continue button.

  • I have a Seagate Freeagent 1TB external drive that ejects it's self in the middle of the time machine backup, then disappears and can't be found unless I turn it off and back on again

    I have a Seagate Freeagent 1TB external drive that ejects it's self in the middle of the time machine backup, then disappears and can't be found unless I turn it off and back on again. Any ideas?

    Hmmm.. sorry to jump in but...
    I Wish I had seen this before I got mine.
    Mine has been doing this auto eject stuff too.
    I think I just plugged it in and TM let me select it but is it possible
    I should have reformatted it with DU first, like with all the WD drive problems ?
    Is it too late for that ?
    Or just try to return it or get rid of it ?
    TIA

  • HT1382 What is the best method to backup an Iphone 3G and then install newer ios without losing any info on the phone?

    What is the best method to backup an Iphone 3G and then install newer ios without losing any data in the phone?

    How to BackUp  >  http://support.apple.com/kb/ht1766
    Key2Paradice wrote:
    What is the best method to backup an Iphone 3G ...
    Note:
    The iPhone 3G can only update as far as iOS 4.2.1
    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    If an Update Appears Install it... if not... you are up to date for your particular Device...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch

Maybe you are looking for

  • Transportation group at delivery header

    Dear Friends, while creating the delivery from some of the plants transportation group not determined at delivery header level, but i can find the same at item level. Can you please let  me know how it gets determined at header level, if there is any

  • How much data is used when using facetime over 4g

    How much data is used when using facetime over 4g. Say a 10 min call over facetime, will it use few MB or more. Thanks, Manish

  • Lightroom 2 trial, how do i go back?

    Hello all helpful adobe users :) I thought I'd like to give the new version of lightroom a try, so I downloaded a trial. When I installed it, I recall that i chose for lightroom to convert my library, Im not quite sure though. Then one day, I acciden

  • Keyword hud questions

    Hi there everyone, I have a couple of questions regarding the keyword hud: Somehow my "stock categories" entry has moved as a sub-entry for another keyword. I have tried to just drag it out back to its rightful spot but it only seems to want to becom

  • Stop Multiple Billing Docs generation  for multiple confirmations ,

    Hello Experts, We have implemented the SAP CRM service module. We are creating the gollowup  Service Confirmations for the Service Process. Some times we are facing the problem with Billing Doc generation for Service Confirmations in CRM system. We a