HT201250 Using Time Capsule for Backing Up a RAID Array

I am setting up an 8TB RAID 0 array at home. I am going to use 4 - 2TB FW drives. I already have an SSD in my 3.4 Ghz i7 iMac but am speed hungry and since I have the drives, I figure I would play a bit. I know it is vital to have solid back-up for this, but I am unsure of the best back-up solution. I am wondering if I can attach 3 - 3TB drives to my 1TB Time Capsule and use the combined 10TB in Time Machine to back it up? To date I have backed up each drive separately, but am realizing the folly of that and want to explore RAID 0 at the same time as explore a new back-up solution. Everything I read tells me I need a drive for backing up the RAID array that is at least as large as the combined total of the array. That doesn't make sense if the array is so large... I can't find anywhere if Time Machine supports spanning mulitple back-up drives.

According to the document linked below, you can, but it may not have the performance to back up that much data. Over Wi-Fi, forget it.
Uses for the USB port of Time Capsule, AirPort Extreme, AirPort Express

Similar Messages

Can i use time capsule for back up my movies and watching them with my bravia tv

can i use time capsule for back up my movies and watching them with my bravia tv.
i mean can i use this for external hard disk drive to back up my movies and watching them with tv that has a lan port or wi-fi technology.

Only if the TV is a media player.. the TC is dumb as a board router with a hard disk.. there is no DLNA which I suspect the TV requires.. you can get a player like the WDLive and it will play movie files from the TC to the TV.. remember the TC is nothing but a file store.. no servers .. no nothing.

Best practice to use Time capsule for back-up of 3 different products (MBP 15 OSX lion, MBP 13 OSX lion and MBA 13 OSX mountain lion)?. Only the MBP15 is back-up regularly.

When I want to save data of the MBA13 on mountain lion (wireless) with time capsule, hois there any best practice to perform?
After that, assuming that data are back-up, can we easily differentiate data in time capsule belonging to MBP15/13 and MBA13?

Unfortunately, Apple left off the Ethernet port....the most important port in networking....on the MBA, so your first backup of the entire Mac will need to be done using wireless.
That may take a day or two unless your MBA has a Thunderbolt port on it in which case you could add a Thunderbolt to Ethernet adapter and connect the MBA to the Time Capsule for the first backup using an Ethernet cable. It will probably only take 3-4 hours or less doing it this way.
Once you have the first complete backup done, other subsequent backups can be done using wireless since they will ony take a few minutes, on average.
Both Macs will backup to the Time Capsule using Time Machine automatically. Backups will be kept completely separate, so one Mac will normally only be able to "see" its own backups.

How to use time capsule for wireless back-up but not internet?

Hello,
I have a tower and recently a laptop at work. The tower is connected to our local network with an ethernet cable and the laptop with wireless. So, the internet connection is fine for both.
I was hoping to use my time capsule to do time machine backups on my laptop. Do you have any advice on how to configure this? I do not want to use the time capsule to extend my Internet, as I believe my work I.T. would prefer to handle all access to their network.
Perhaps there is some documentation about doing this that you could point me to? I have not been able to find it.
Thank you for your help.

Your original question was How to use Time Capsule for wireless back-up but not Internet?
There is no reason for you to connect the tower....or anything else...using Ethernet if your goal remains that same as you stated.
If you are asking if you can backup the Tower using Ethernet, and not wireless, then you can connect the tower to one of the LAN <-> ports on the Time Capsule....not the WAN port.
Yes, it appears to work without plugging into my tower.
Correct, it will work.
I just have to select the network that it created. Of course, I have no access to the Internet while this is happening and it can not auto backup, unless I am on that wireless signal.
As I stated, that is the downside to trying to back up without an Internet connection. You have to establish another network...and backup over that network.
If you are asking if you can stay connected to the work network while also backing up to your non-Internet "private" network, that is not possible.

HT3728 i want to use my time capsule for back-ups only and not connect it to the internet

I live in digs and with perfectly good wi-fi. Therefore, I simply want to use my Time Capsule for backing up my iMac. Airport Utility doesn't seem to want to let me do this and insists I connect the unit to the internet first.

I gave full info for how to do this setup in this thread with screen shots..
https://discussions.apple.com/thread/4817218?tstart=30
Any of it you don't follow just ask.
The TC is really a complex thing to use, when you don't do it as Apple designed it.. and in fact on your iMac an external drive will be cheaper, faster and more reliable than a TC. But I guess you already have it so may as well use it.

Time capsule for back-up only. How do you turn off the flashing amber light?

I am using time capsule to back up my work computer. I use internet through an ethernet cable, no wireless (it's my desktop work computer!), so don't need the airport - just back up on time machine.
I figured out (although there is NO information in the time capsule manual) how to set up the time capsule to wirelessly back up my computer, but because I don't have it plugged into the modem, and I haven't set up an airport connection, it blinks amber at me. How do I make it know that it is as set up as I want it to be, so it will be a steady green? Should I edit the airport utility options so that wireless network mode and/or router mode are "OFF"? If I set wireless mode to off, will my computer still "see" the time capsule and back up using time machine?
This might just be finicky on my part, but the flashing light is annoying me!

If you set up the Time Capsule to back up wirelessly, it functions only as a wireless hard drive...with no routing capabilities at all. In other words, the Ethernet ports on the Time Capsule are not enabled, even though you might have an Ethernet cable connected.
Try opening Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click directly on the amber dot
AirPort Utility will display a message with information about why the amber dot is flashing. It might be something like a message that a firmware update is available for the Time Capsule.
Should I edit the airport utility options so that wireless network mode and/or router mode are "OFF"?
No, since the Time Capsule will no longer connect wirelessly if you do this.

Can you use time capsule for your mac and have readynas backup your pc's on the same network

Can you use time capsule for your mac and use readynas to back up your pc's on the same network

Sure, that is trivial setup.. they both have different names and IP addresses.
You should be able to use ReadyNas for TM backup but you should check the latest state of play for that.

Can I use Time Capsule for Time Machine and a place to put my iPhoto Library

Can I use Time Capsule for Time Machine and a place to put my iPhoto Library?

Only if you partition the Time Capsure into two partitions, one for TM and one for the iPhoto LIbrary. But you won't be able to backup that library as it will be on the same drive as the TM backups.
It's not recommended. An alternative solution is to get another EHD, move the library to it and run it from there. Then TM can backup both your boot drive and the working EHD drive.
OT

Our iMac (intel, 11.2) freezes up when using Time Machine for Back Ups. We have 16GB of RAM and the BU drive is 1 TB on firewire.

Our iMac (intel, 11.2) freezes up when using Time Machine for Back Ups. We have 16GB of RAM and the BU drive is 1 TB on firewire.

See Pondini's TM FAQs for starters.

Can I use Time Capsule for a server ?

hi,
i was wondering if I can use Time Capsule for a server.
Let's say I have an ubuntu server, and I'm running some websites and web applications on it.
I would install these appications on ubuntu but then store the "file folders" of each website or application (with images, videos, etc.. ) on Airport capsule and leave only the application files on the server.
Is this feasable ?
Thanks
Patrick

Welcome to the discussions!
+Is this feasible ?+
Feasible, yes. Practical, no...unless you are willing to put up with very slow access to files that are on the Time Capsule.
Keep in mind that the Time Capsule was designed primarily for Time Machine backups, not as a media server for quick access to data. You might want to explore other options that would allow much faster access to files when you need them.

Use Time Capsule for video...

Has anyone used Time Capsule for video streaming? How to connect to TV if it's pre-digital?

Time Capsule is not a Media Player.. it has zero ability to stream video. It has zero ability to do anything but hold files. It will sit there and hold your video files very happily .. but the dumb as a board hard disk and TC controls can do nothing with it.
You need a media player. And you need one that is able to be hacked or is not Apple. Apple work on itunes, although it is possible to use an Apple TV in the mix if you send video to it from ipad using airplay.
If by pre-digital TV it doesn't have hdmi input, then buy yourself an older media player that has component out.. there is no point buying expensive hdmi to analogue converters. You will eventually replace the TV and will definitely want to go digital. So get an Apple TV 1 that still works from ebay. And use one of the hacking methods. This has component video and you can also get composite out of it. And it will play files stored in the network. Other non-apple players will do the same. Just find one that is older design with component still but ATV1 can still work well. I use one with a crystal acceleration card running crystalbuntu firmware.

Use time capsule for backup for HP Windows computer?

How can I use Time Capsule for backup on a HP Windwos computer?

Apple does not offer Windows backup software.
A popular PC application used to backup a PC on the Time Capsule is Genie Timeline Pro. You might want to take a look:
Genie Timeline Pro | Overview | Time Machine Backup Software for ...

Can i use time capsule for external h drive and also for time machine?

Can i use time capsule for external h drive and also for time machine?

Hello, vascocaco.
If I understand correctly, you're wondering if you can use your Time Capsule's internal hard disk both for Time Machine backups and as an ordinary drive. Is this your question?
You can, but Time Machine backups may take longer.
To do it, you should partition your Time Capsule's hard disk to create one volume for the backups and one for other files.

Using Time Capsule for backup storage as well as Time Machine back-up

Just set up Time Capsule and used Time Machine to back up files. All working OK with new backups as well, but I need to transfer files from an external hard drive to Time Capsule.
Read on Apple site, "Note: Time Machine works best if you use your back-up disk only for Time Machine backups. If you keep files on your bckup disk, Time Machine won't backup those files and the space available for Time Machine backups will be reduced.
What I really need is to have Time Machine backup everything. I don't have enough internal hard drive space on my MacBook Pro to transfer files from the external hard drive to the computer so that Time Machine could read them and back them up. How can this be accomplished? Is there another way? Thank you.

1. "Use Disk Utility in your Applications > Utilities folder to check the format of the disk. Mac OS Extended (Journaled"
I did this and the external disk is formated corectly. Thank you!
I "Entered Time Machine" again and found the external drive listed (Yes!) I reviewed files including photos and some video files and all were accessable except my iPhoto files. Note: I have been using iPhoto Manager (3rd party software) to organize my iPhoto picutres for some time now on the external drive. My internal hard drive, 125 GB, filled up years ago, so I got this program and moved the iPhoto images off the internal drive. I can see the information for the files, i.e. size, created date, lst modified date, but cannot get acess to the picutres. When I try the same procedure with my external drive I can get into the files and get access to the photos.
Is there a way to gain access to these pictures?
2. I also saw that my Applications folder had been backed up as well, but none of the Apple software, Adobe CS programs, Flash, Final Cut Pro are there. I am wondering if it is because this is an institutional college set-up machine and they installed the original software. There is a "Tech" folder that I do not have access to on the machine. I can update the college installed software and add software myself. All of the software I have added over the years seems to be there in the backup.
So is this simply not accessable except via "Tech"?

I have just got an Airport time Capsule for back up how do I do it? Do I put the ethernet cable into the back of my sky hub because when I do that the amber light on my Time Capsule flashes amber. Please talk in simple terms as I am a

I have just got an Apple Airport time capsule to back up my one year old iMac......how do I do it? I have tried putting an ethernet cable into the time capsule and to my sky hub, all I get is a flashing amber light, can anyone help I am a silver surfer not used to Apple products, but love them, plus I don't understand half of the jargon....HELP please

Apple's Setup Guide for the Time Capsule is pretty simple and clear for most users, and you don't indicate at what point or step that you are getting stuck.
So, please go to page 8 in your Setup Guide to review the topic of Plugging In Your AirPort Time Capsule.
The Sky hub will likely have 4 Ethernet <--> ports on the back of the device. Pick any one that you want and connect one end of the Ethernet cable to the port that you choose.
Then, connect the other end of the Ethernet cable to the WAN (circle of dots) port as shown in the Setup Guide.
Continuing with the instructions on page 8 of the Setup Guide, power up the Time Capsule by connecting the power cord from the back of the Time Capsule to a wall AC jack.
Note that the instructions indicate that the indicator light will be solid amber during startup, and it will change to blinking amber during the setup. The light will remain blinking amber until you have configured the Time Capsule at which time the light will turn green.
Next, go to page 12 of the Setup Guide to see the information to Use your Mac or iOS device to set up your AirPort Time Capsule.
You indicated in your tag line that you were using OS X Mountain Lion (10.8.3), and since that will exceed the minimum requirement of a Mac using OS X (10.7.5) as noted in the guide, you can use your Mac to set up the Time Capsule.
Continuing with the instructions on page 12 of the Setup Guide......
1. Open AirPort Utility on your Mac. It is located as follows: Finder (the smiley face on the dock) > Applications > Utilities > AirPort Utility
2. Select your AirPort Time Capsule and click Continue. You won't be able to do this, but read further......If you do not see the AirPort Time Capsule that you want to configure, choose it from the WiFi status menu in the menu bar, at the top of the screen.
So, clicking on the WiFi icon will yield a small window that looks like this:
The example below shows an AirPort Extreme. You will see Time Capsule on your screen. Click on Time Capsule.
When you click on Time Capsule, that will get the setup wizard going. it will take a minute to analyze the network, then display a screen that looks similar to the illustration below, except that you will see a picture of a Time Capsule on your screen
3. Continuing with the Setup Guide.......Follow the onscreen prompts to create a new network
Network Name...........Type in a simple name that you want to call your network. Do not use the suggested name.
Base Station Name....Type in a simple name that you want to call the Time Capsule. Mine is TC, for example.
Password...................Type in a password that will be used for both the network and the Time Capsule. Write that down.
Verify..........................Type in the password again to Verify
Click Next
The setup wizard will configure everything for you. When you see the message of Setup Complete, click Done.
The Time Capsule is now set up and it will display a green light.

HT201250 Using Time Capsule for Backing Up a RAID Array

Similar Messages

Maybe you are looking for