HT201250 what does reported "error code 6584" mean ?

What does reported "error code 6584" mean ? when trying to get into my time machine back up.

First, I suggest you make another full backup to a locally-attached external hard drive. You should do that anyway. One backup isn't enough to be safe, and backing up over a network is less reliable than backing up locally. Then try each of the following steps that you haven't already taken.
1. Restart the backup device. You can do that by disconnecting and reconnecting the power cord.
2. Open the Time Machine pane in System Preferences and check that the device is selected as a destination. If it isn't, select it and try again.
3. Hold down the option key and select Verify Backups from the TM menu in the menu bar (not the Dock icon.) This operation may take a long time. If the menu-bar icon (a clock that runs backwards) isn't showing, check Show Time Machine in menu bar in the preferences.
4. Erase the backup device. With a Time Capsule, you do that from within the AirPort Utility application; see its built-in help for details. All backups on the device will be lost, so don't do this until you've backed up to another device. After erasing, select the device again as a backup destination in the TM preference pane. The first backup should be made over a wired connection, if possible.

Similar Messages

  • What does the error code 0x80090318 mean connecting to IStore?

    What does the error code 0x80090318 mean connecting to IStore?

    I think the problem was using a WPA2 network rather than a WPA network. When I tried connecting to a WPA network, everything went fine.

  • What does the error code -41004 mean in print report.vi?

    I am getting the following error in the Print report.vi.
    Error Code : -41004
    Error Scource : Print Report.viPrint_VI_Image.vi

    Hi
    I have attached the main vi which is using the NI-Print Report.vi.
    I have also attached the image of the error desciption I got.
    Attachments:
    OPG_Print_to_PDF.llb ‏94 KB
    error.bmp ‏273 KB

  • What does iTunes error code (-45054) mean?     iTunes quits itself when you click on "OK"

    iTunes error code (-45054) comes up when trying to download a M4b file to our computer to synch with an Ipad.  We get this error code when we try to open this audiofile in iTunes and when we click on the OK button on the error code box, iTunes quits itself.  Won't open without the error box showing: "An unknown error occurred (-45054)" and quits itself when you click on OK to close the error message box.  Uninstall?  How?  Any ideas or suggestions?

    Still have the same issue ? I have it too ! Trying to re install iTunes but the issue is always the same !   ??

  • To what does G4 error code post16/4609 refer?

    to what does G4 error code post16/4609 refer?
    G4 MDD 1.42 PPC passes all hardware tests but gives post16/4609 error at start up.
    What does it mean?
    What is the resolution?

    I don't get any unhappy beeps.
    I get the chime. If I am not patient restarting I get high speed fan - I shut off be patience restart and get chime and search for drive then circle slash. hardware test gives me the master post 16 / 4609. - suggesting a bad drive according to other apple pundits. However, I have put two new 250GB WD drives in and still get a mass storage error. My G4 Mdd 1.42 supports drives 128GB+. I've replaced IDE cables and have master drive with out a jumper and have tried slave at CS and 3/4 slave setting all with the same result.
    Target boot got me to the "firewire drive" showed me one unformatted 250GB drive and I used disc utility to partition it according the PPC settings. Still same error.
    What gives?

  • HT1491 Why do i keep getting the message 'Cannot connect to iTunes Store' when I have done every connection I can find? What does the error message (-1202) mean when I am on the iTunes site on my computer?

    Why do i keep getting the message 'Cannot connect to iTunes Store' when I have done every connection I can find? What does the error message (-1202) mean when I am on the iTunes site on my computer?

    Hi Velvalee,
    While there may not be specific information about that error, here is an article of steps for troubleshooting connectivity issues with the iTunes store:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    If that article does not help, there is a link near the bottom for an additional article of advanced troubleshooting.
    Cheers!
    - Ari

  • What does "unknown error has occurred mean when trying to login to the app store

    what does "unknown error has occurred" mean when trying to login to the app store

    Welcome to the Apple forums.
    Good idea to fill out your profile so people can see what machine you are writing about.    
    Also a good idea to do a little research through the 'More like this' panel to the right of your initial post.    Each of the threads also contains more leads so it is amazing how much you can learn from them.
    Good hunting.

  • TS2446 What's the error code 1009 means ?

    What's the error code 1009 means ?

    What country are you in, and are you trying to use another country's store ?

  • HT201250 An unexpected error occurred (error code -6584). what does this error code mean ?

    mac airport time machine i tried to open up error code 6584 would not open please help !

    First, I strongly suggest that you make another full backup to a locally-attached external hard drive. You should do that anyway. One backup isn't enough to be safe, and backing up over a network is less reliable than backing up locally. Then try each of the following steps that you haven't already taken.
    1. Restart the backup device. You can do that by disconnecting and reconnecting the power cord.
    2. Hold down the option key and select Verify Backups from the TM menu in the menu bar (not the Dock icon.) This operation may take a long time. If the menu-bar icon (a clock that runs backwards) isn't showing, check Show Time Machine in menu bar in the preferences.
    3. Erase the backup device. With a Time Capsule, you do that from within the AirPort Utility application; see its built-in help for details. All backups will be lost, so don't do this until you've backed up to another device. After erasing, select the TC again as a backup destination in the TM preference pane. The first backup should be made over a wired connection, if possible.

  • HT1178 What does (error code -6584) mean?

    I have recently bought a new MacBook Pro and migrated all my data from my old MacBook Pro to the new one.  Now my new MacBook will not connect with the Time Capsule - I just get a message that:
    The operation can’t be completed.
    An unexpected error occurred (error code -6584).

    (error code -6584) unfortunately won't tell you much that you do not already know....the connection attempt failed. That was the "unexpected error".
    You may have already done this...but your post did not indicate whether you had.
    Complete power cycle of the entire network....
    Power everything down in any order you want
    Wait a minute
    Start the modem first, and let it run a minute or two
    Router next (might be your Time Capsule) the same way
    Continue starting devices one at a time about a minute apart
    Did you completely reset the connection path in Time Machine Preferences to "point" your Mac at the Time Capsule disk?
    If not, click the Time Machine "clock" icon at the top of the Mac's screen
    Click Open Time Machine Preferences
    Click Select Disk
    Click your Time Capsule to highlight it
    Click Use Backup Disk

  • TS3297 What is the error code 6003 means

    What is the error code 6003 means

    This Discussion may be able to offer some enlightenment...
    https://discussions.apple.com/message/11655160#11655160

  • What does this error code mean?  Help!!! First post.

    New guy here. My wifes computer starting making strange repetitive hard drive noises several days ago. A few frozen screens and now will not boot. The computer is a Powerbook G4 15in. I ran the hardware test several times and got no error code. I even ran the extended test twice with no luck. Finally I got an error code of 2 STF/4/3:ATA-100ata-6-Master. I ran again and got 2STF/3/3:ATA-100ata-6-Master. Last time got 2STF/1/4:ATA-100ata-6-Master. What does it all mean? Thank you for any help. My wife is a teacher and needs her computer every day.

    Hi, Dan - Welcome to Apple Discussions.
    A 2/STF... error indicates the imminent failure of the hard drive. If possible, you should connect your wife's computer to another FireWire equipped Mac and attempt to boot it into target disk mode in order to retrieve what personal data you can.
    If the machine is still under warranty, contact AppleCare (800.275.2273), inform them of the error messages you're getting, and arrange for them to replace the drive.
    Good luck!
    Tuttle
    1529/8237

  • On updating Creative Cloud, I get an error code 50 - what does this error code mean?

    Downloading and installing an upgrade to Creative Cloud, I keep getting an error code 50.  I have look for a list of error codes with no luck.  Can anyone tell me what this error code means and what the fix is?  Thanks in advance.

    Error 50 https://forums.adobe.com/thread/1432237 may help

  • What does an error code "300 (LACQ_LICENSE_DENIED)" mean in the server?

    If the Adobe Access Reference Implementation License Server throws a 300 error code, the most likely issue is that the evaluation of the Adobe Access DRM policy failed during license issuance, and that the license server refused to issue a license.
    For example, if the policy specifies an end date that was in the past, the license server will see that the current time is beyond the validity date specified in the policy and reject the license request, recording an error code 300 in the Adobe Access license server's logfile.
    cheers,
    /Eric.

    I can't believe there is no answer to this question.
    after all day researching I've given up google and went back to basics
    OS X Server essentials book....
    and I found it ...
    So in Server.app left panel top... click on your server name and than Settings tab in the right one.
    make sure that Enable Apple push notifications are ticked
    Tha... tha... thats all folks

  • What does this error code mean?

    I keep trying to update my regular adobe and I keep getting this error code 1310 it states that I need to verify that I have authority for file C:\config.Msi\PFCICE.tmp file.  I assume this may have something to do with my virus suite, but really have no idea on how to fix this.  Anyone got any help for me it is driving me crazy!

    Please refer : http://helpx.adobe.com/creative-suite/kb/error-1310-error-writing-file.html

Maybe you are looking for

  • Is there a recommended way to disable multiple logins

    Hi: I am trying to use both SiteMinder security for authentication, and WLS security for user identification and possibly authorizastion Is there a way to do this without using SiteMinder WebLogic Security realm agent. If the only way to achieve this

  • User Login with jquery mobile

    I have this code that works perfectly but when i embed with Jquery mobile it fails to work. its a user authenication code <%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%> <!--#include file="../Connections/VT.asp" --> <%     ' *** Validate request to log in

  • Separate transactions in one ADF app?

    Hello All! Is it possible to create two (ore more) separate transactions in one ADF ApplicationModule? I use JDev 10.1.2 and the default stack: ADF BC, Struts and JSP. I would like to do something similar: I've got two tables, orders, and partners. P

  • Can a macbook pro 13" retina (mid-2014) run 2 external monitors with 2560x1440 resolution?

    Can a macbook pro 13" retina (mid-2014) run 2 external monitors with 2560x1440 resolution? If not what if I turn off the macbook internal display? I

  • MacBook Pro doesn't start help help!!

    My Mac book pro doesn't start following some issues with the touch pad.when I press on/off button it shows me a blank white board with apple logo followed by a text "panic CPU 0 caller ...oxffffffffff801db."........ Debugger called 0xffffffffffffffff