HT201263 Crashed iPad during latest update and unable to restore
I have followed all of these steps:
iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.
Use iTunes to restore your device.
When I connect to iTunes and the above message appears, I can see behind the message that it says "iPad Recovery Mode" but for the serial number it has n/a it says that I am up to date on software on iPad, but when I click ok on the "iTunes has detected..." the opportunity to click on "restore iPad" disappears! I am stymied!
PS: I read all of the threads on: Re: iPad crashed during OS update and now iTunes can't restore and followed what they suggested - no resolution to be had
Similar Messages
-
My iphone died during system updates and will not restored form itunes
Help restoring my iPhone that died during system upgrade.
Itunes does not recognize my phone. Any suggestionsWhat if anything is showing on the screen?
The Red Apple Itunes logo with a charger cable
What happens if you press the sleep/wake key?
It shuts off momentarily, restarts with the white Apple Itunes logo, then The Red Apple Itunes logo with a charger cable
Is the phone fully charged?
Yes
Thank you for you help. Do you have any suggestions. -
I just downloaded my latest update and my Ipad just defaults to my home screen. I was reading a book on Overdrive before t.he download and whe I now Tory to open it just. Takes me to mt home screen. The same with Safari. Any thoughts.
Try a reset which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously you see the Apple logo and then release.
-
I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else. How can I fix this to let me use my IPAD?
YOU ARE IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
My Iphone 4s just stopped during the latest update and now the screen show the Apple icon and an white bar beneath. I can no longer get anything to work on the phone!! Where to from here??
You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them. -
My iphone crashed during the update and now it wont recover.
My iphone crashed during the update and now it wont recover. I keep getting a message say " an iphone has been found thats in recovery mode, please restore it and update."
Every time that i try to restore it, is stops with a couple of minutes left and gives me the same message.
can anyone help?How many times have you tried...?
Some Users have reported that as many as 8 or 9 attempts were necessary before success.
See Here > http://support.apple.com/kb/HT1808
Be sure to Follow ALL the Steps... -
My AppleTV (2nd gen) crashed last night with the latest update and now all I have a flashing light. What to do? It showed a USB symbol point toward an iTunes symbol and won't reset after resetting with the remote. Same thing.
usb symbol pointing toward an itunes symbol is apples way of trying to get you to connect the appletv to your computer running itunes so it can restore the apple tv's software
though it seems to be a connection few people make -
My iPad Air stalled during an update and will not restart even after pressing the on/off button for 15 seconds. Any suggestions?
Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear and it should reboot.
-
Just installed the latest update and now I can't open e mail attachments on my iPad and I phone 5s
just installed the latest update and now I can't open e mail attatchments on my I phone 5s and iPad 2
Try re-installing the big 10.6.8 Combo...
http://support.apple.com/kb/DL1399
Repair Permissions afterwords, reboot. -
my phone was unable to finish the latest update and gone into recovery mode. will only restore if i do a factory reset, but i dont wanna lose my photo/videos!!! how can i back up up before i restore it. im not able to acces my phone normaly, stuck in recovery or something.
it seemed to have backed up everything just before the software update 6.1.4. so after the full restore i restored from backup and its all still there (mostly)
what a relieve...thx -
I tried to update my iPad to latest ios and it is now asking me for a password...4 digits. I never had a password on it and it is too short to be my apple password. Help anyone? It keeps locking me out as I try different passwords.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost -
I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else. How can I fix this to let me use my IPAD?
Hi ....
"I get the itunes logo and then nothing else"
Use Recovery Mode > If you can't update or restore your iPhone, iPad, or iPod touch -
My iPad froze during latest update.
I Have an iPad 3, 128 gb, less than 6 months old. I was installing the latest update and it froze with the white Apple logo on the black screen and the download
bar 1/4 of the way finished. I have no response from the power button or the reset button. Any suggestions?You've tried a soft-reset, pressing and holding both the home and sleep buttons for 10 to 15 seconds ?
If that doesn't work then try recovery mode and then restore to your backup : If you can't update or restore your iOS device -
Did anyone else's ipad2 crash with the latest update of 7.1.1?
Did anyone else's ipad2 crash after the latest update of 7.1.1?
If the unit has NEVER been jailbroke, first try a system reset. It cures many ills and it's quick, easy and harmless... Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this. -
2 Apple TVs. The first won't reboot, it stalled during an update and now shows a picture of a UBS plug. Ive tried to plug into my computer, nothing happens. At a standtill.
The second Apple TV works but only if I send something via Airplay. The remote no longer has any affect. The light on the front of the Apple TV blinks when I push a buttom on the remote but nothing happens.
Any Ideas? I am starting to think I need to replace them. Thanks.Ok, with itunes open on the pc, plug one end of the usb cord into the computer, but not connected to the ipad.
now, press the power button on the ipad until it turns off.
Then, press and hold the home button on the ipad at the same you plug the usb cord into the ipad. DON'T LET GO OF THE HOME BUTTON.
Keep holding the home button until you see the recovery mode message pop on the itunes window.
When that happens, you should now be able to restore.
Maybe you are looking for
-
S P R E A D type settings (created in FH, not editable in AI)
I am converting a batch of old maps from FreeHand to Illustrator, with spread type for the state names: C A L I F O R N I A In FreeHand, letter spacing can be spread out by dragging the right edge of the type box, or numerically by typing a
-
Can I update a mac osX to new operating system?
We have an iMac that is about 6 or seven years old. We are trying to install an app that requires the software/operating system ios7 on our Mac. We have been able to update our phone and iPad but cant update the computer. Any way to get around thi
-
When will Serbia be added on country list for Apple Store?
I want to buy some stuff on Apple Store but my Country is not on the list.So what should i do? Cheers.
-
Flash PLayer Audio Quality Issue
Howdy, I am having a strange issue where I am hearing quality issues in the playback of sound on any flash content (youtube etc ..). The background music or backing tracks all play fine, but the Vocals / Voices in the video are quiet and distorted.
-
Hi, Please advise me about the delivery process of a project implementation, means different stages in implementing a project and different types of documents created. However it may be changed from company to company, please guide me with one exampl