HT201263 I cannot update my iPad as my version does not have under the general setting a soft wear update section. What do I do?

Cannot update my version as no update button in the general settings set ion.

You can only update to the latest version of iOS by OTA (Over The Air) if you have iOS 5.x or later.
Since you have iOS 4.3.3 or 4.3.5 you will have to connect your device with your 30 pin dock connector to usb cable to one of your usb ports and then launch iTunes if you have installed on your computer you normally sync with.
Then, you will be prompted for an iOS update.
Or, once your device appear on the left hand side under devices select it and then a window will appear on the right hand side with several panes (tabs).
Select the Summary pane (tab) and then under the 'Version' section select 'Check for Updates'
Hope this helps
Let me know

Similar Messages

I just updated my ipad. my home button does not work. it is just sitting on a screen saying ios6. what do i do?

i just finished updating ipad to IOS6! my home button quit working a little while ago. now my ipad is just sitting on a screen saying IOS 6. what do i do to get to my home screen and open my ipad?

Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.

How can I update my iPad products when it does not allow me?

How can I update my iPad products when it does not allow me?

All Apple servers are undergoing a huge number of hits. I think tomorrow or even the next day, all upgrade and activation servers will be in better shape.
Patience, Grasshopper.

We cannot get our Ipad Air to charge. We have tried the wall plug and the computer plug in. It just gives us a message saying it's not charging.

We cannot get our iPad Air to charge. We have tried the wall plug and the computer plug in. It just gives a message saying it's not charging.

Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good.
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

HT4623 I'm trying to update my iphone 3gs from version 4.2 but under settings-general there is no update link

I'm trying to update my iphone 3gs from version 4.2 but under settings-general there is no update link. This is probably a frequently asked question, so I'm sorry but I'm new to this.

That is only a feature of iOS 5 or later...
You have iOS 4... See Here...
http://support.apple.com/kb/HT4972
OR...
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch

HT4623 how do you update an ipod touch? Mine does not have the software update under the general tab. thx

how do you update an ipod touch? Mine does not have the software update under the general tab. I would like to back it up to Icloud. Thx

Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch
To use iCloud you have to have iOS 5 or later.

When trying to update apps i keep getting billing method incorrect(this is on iphone 4s) i hsve tried this store,apple id,view id,payment info but does not offer me the none option,i can npt update my phone any ideas anybody please?

when trying to update apps i keep getting billing method incorrect(this is on iphone 4s) i hsve tried this store,apple id,view id,payment info but does not offer me the none option,i can npt update my phone any ideas anybody please?

If you dont have none option then you must own itunes some money. So you have to enter the payment like a itunes giftcard. you can contact itunes by email by going to expresslane.apple.com

How can I convert my Open Source document files into Word document files? I cannot download Pages since my Macbook Air does not have the most recent software.

How can I convert my Open Source document files into Word document files? I cannot download Pages since my Macbook Air does not have the most recent software. I downloaded open office to my mac to try and save money. It worked well for a while. Now I get this pop-up message that asks me to "Reopen" and when I select the option, nothing happens. I cannot save my documents anymore and I cannot convert them to word. Help!

dwb wrote:
Does OpenOffice output Word documents by default or do you have to select it manually?
You have 17 options to save as in Open Office, one of which is .doc files, yes it needs to be saved manually.
You may be able to default to DOC, but have not tried same.
Since Open Office is 99% same as Word, I use it, or Word, either one. Open Office is a bit less buggy than Word 11'

I just updated my iTunes and I do not like the newer version.....can I go back to the earlier version?? This new version does not have the iTunes DJ nor does is show at the bottom as in the earlier version how many songs and the size of my library.

I just updated my iTunes on 12-7-2012 and I do not like the newer version.....can I go back to the earlier version?? This new version does not have the iTunes DJ nor does is show at the bottom as in the earlier version how many songs and the size of my library.

To do this in iMovie 11. use the SHARE menu. Share your project using the Share menu and choose Export Using QuickTime.
In the Dialog box that comes up, choose Sound to AIFF, or one of the other sound options. This will create a file that you can drag into iTubes.

I installed Lion OS X and Logic Pro won't run. I downloaded the 9.1.5 update: "An Eligible Logic Pro Version Was Not Found in the Applications Folder. This Update require Logic Pro Version 9.0 or higher". I have Logic Pro Version 9.1.1 installed.

I installed Lion OS X and Logic Pro won't run. I downloaded the 9.1.5 update: "An Eligible Logic Pro Version Was Not Found in the Applications Folder. This Update require Logic Pro Version 9.0 or higher". I have Logic Pro Version 9.1.1 installed.
I even pulled the dmg file into the Logic Studio folder in my applications directory and it still does not recognize it. What do I do now?

Niel: Thanks.
For others benefit, here is what happened.
I had installed Logic Studio 9.1 some time ago.......not knowing what all the programs were nor what they did, I created a "Logic Studio" subfolder in my applications folder and put all Logic Studio programs into it so I'd know where they were and could review each at my leisure over time.
My assumption now is that when the updater looks for the Logic Pro program, it looks only in the applications folder. It seems lame that it would not also look in the subfolders of the applications folder, but that apparently IS the way it works. Because my Logic Pro program was located in the "Logic Studio" subfolder, the updater just didn't see it..hence the error message I received when I tried to update.
Solution: I moved all the Logic Studio programs out of the subfolder and now they reside in the applications folder. Ran the 9.1.5 updater and it worked like a charm.

I had put my 3G sim in one IPAD 2 for testing. After 2 days I put the sim in my own IPAD 2 , but it does not accept/read the sim. Kindly advise

I had put my 3G sim in one IPAD 2 for testing. After 2 days I put the sim in my own IPAD 2 , but it does not accept/read the sim. Kindly advise ???

Hello Murali19,
I would recommend following through the article linked below for some useful troubleshooting steps that may help get Personal Hotspot enabled with the desired SIM card.
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/kb/TS2756
Cheers,
Allen

Hello i am wanting to print from my ipad but my printer does not have wifi. Is there a way of doing this e.g. buying a wire to connect it?

Hello I am wanting to print from my ipad but my printer does not have wifi is this possible?

You can't cable connect a printer to the iPad.
iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
iPad Power: How to Print
http://www.macworld.com/article/1160312/ipad_printing.html
Check out these print apps for the iPad.
Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8 Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
FingerPrint turns any printer into an AirPrint printer
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
 Cheers, Tom

HT4623 I have recently moved from the UAE to UK my ipad bought in UAE does not have facetime feature ... apparently blocked by UAE agreement with APPLE? Now I am in Uk is there anyway to register through APPLE STORE my ipad and get a software update to in

I had purchased my ipad air in UAE and have now moved to UK. The software version sold in UAE does not have facetime on it. Now I am based in UK and would like to use facebook to keep in touch with friends in Uk and USA is there anyway of registering my ipad with UK APPLE to ensure I get a software update that allows me access to facetime?

Sorry. No. Part of the agreement was that devices sold in the UAE are never allowed to have facetime (probably to prevent just what you're trying to do.)
If facetime is a make it or break it, you might sell yours and buy another one, or find some other service to use. Maybe skype would work for you?

Windows 8 Pro volume license version does not have "Add Features" therefore cannot install media center.

As the title describes, Windows 8 Pro installed from the Volume License ISO does not have the Add Features wizard, and as such it appears to be impossible to install the Windows Media Pack.
I've consulted with Live Chat support who cannot provide an answer to this, they simply said it should be done through "Add Features" which does not exist.
A similar thread was answered by saying install from a Retail disc and upgrade. However this is hardly a solution, paying for an additional Windows license when you already have a volume license.
Can anyone, preferably MSFT, provide a proper answer on how Windows Media Center can be install on Windows 8 Pro which is volume licensed. If it can't be done can some reason or justification be given as to why it can't be done.
Please see previous thread here: http://social.technet.microsoft.com/Forums/en-US/w8itproinstall/thread/d63b46e5-c542-4dbe-be41-c46cda440723

I would like to pile on here and say "ditto" to all of the above. you have a licensed product and they don't even support the MSFT version of a DVD player. Nah, no one EVER has to play a older technology in corporate America due to training or presentation
(A funny clip of a movie before a ppt)? Nah.
But, I'd like to add a warning to MSFT senior management. I know you want to force everyone to use YOUR cloud just like apple did to theirs. Wont' work. Some of us refuse to sign onto a web site and let you track all of our moves... some
distrust the cloud (Target anyone?) etc etc. All good points, now for the out of the park. The Harvard Business Review some years ago did a study on long term profitability of a company (you have to have a profit to stay in business). The
most highly correlated factor: Customer Sat. Sorry, but I don't see customer sat in all of these entries.
IF you made your product easier to use and NOT have to have a IT support person to move from a small workgroup to a server configuration (and PS, what in the heck to you get from a workgroup? File Replication, Remote access to outlook files as one
does via exchange? Really, every computer is in a workgoup any more, so there is ZERO value add in a workgroup on a MSFDT platform, however there is great value, even with a couple of users, in an Exchange/Windows Server Platform -- so why so you make
it so damned hard to implement one... Difficult for one to implement in an SMB environment (so lets just kill SBS) but growth from small business is where your growth is... just like IBM did before you, MSFT only appears to be listening to Fortune 500 it execs,
but I really digressed) This is just one more pain in the butt to use MSFT in the small environment. So what is the rational business decision? Yes one can pick MSFT but with Zero value add in the workgroup, why not them other guys (who may
be apple, or android or even some Linux platforms)
SO you want to continue to mil the cash cow, listen to your forums.
One more note on the STORE. Lets say you do pick a competitive product in the windows store. Have them been verified they don't contain malware like MSFT products? I believe the answer here is "NO" So this adds another layer of complexity
and security risk on the corporate problem of "How do I play a DVD on my laptop" I am sure none of you has ever played a movie on your laptop flying for business?
So, MSFT management, let me paraphrase the posts above: "WHY don't you support our business needs"
And remember, people buy to have their needs met..... (IBM Planned Sales Call)
If you don't meet small business needs, someone will... and that too is fraught with risk.
(For example of how to make computers easy to use in SMB I reference SBS, the Systems Management Interface tool in IBM Unix, or best of all, the AS/400.... something even Ellison couldn't kill, though he tried.

I have been trying to download a new update and it goes thru the strokes and restarts but the update version does not show when I go to "about this computer" to see what version is on. Any ideas what is wrong?

I have been trying to download an update on my MacBook Air and it goes thru the process and restarts but the update does not load. I know it is not loading because when I go to " About this computer" the version does not show it updated. Any help would be appreciated. Thanks

trying to download an update
v10.6.8 is as far as Snow Leopard can be updated.
Which update are you trying to install ??

HT201263 I cannot update my iPad as my version does not have under the general setting a soft wear update section. What do I do?

Similar Messages

Maybe you are looking for