HT201263 I followed the article on connecting iPhone to iTunes and restoring iPhone, 8 hours later it comes up saying error connection lost???
My phone was disabled and needed connection to itunes. After following the restore instructions it didnt work? There was no change in internet connection or cable connection with the iPhone, it just came up with the error box after 8 very long hours of waiting! :/ i dont know what to do now?
Take a look at http://support.apple.com/kb/HT1212
If you have a really slow internet connection it could take a while, 8 hours is terrible though unless you're on dial-up or satellite.
If you have an Apple Retail Store near you, set up a Genius Bar appt and see if they can do the restore for you:
http://www.apple.com/retail/geniusbar/
Similar Messages
-
what is happening to 7.0.3? why do we need to connect to itunes and restore for 2 hours? such a waste of time.
No clue as you've provided not details.
What exactly is the problem that was occuring that prompted you to restore via iTunes? -
Hi All,
I tried to search through the community, but with the sheer volume of posts, I didn't find anything that seemed like the same issue.
My iPad 4 just started having issues with the volume. On either Bluetooth or the iPad Speaker, anything I'm watching or listening to drops the sound to just barely hearing it and then, about 2 seconds later, it comes back.
I haven't tried wired ear phones, but I am sure they'll be the same way.
It's very random, but consistent enough to happen several times per day.
Thanks for any help that anyone can provide.
I have restarted it and also did a Hard Reboot and it didn't help.
Thanks Again,
Scott P.Well there you go, when you advertise it just be sure to say that you can't even see the scratches at half brightness and see how it goes.
Of course you are saying you want $500 for one with many scratches on the screen, has been dropped, but the scratches aren't visible at half brightness, and has no warranty. Or I can buy a refurbished iPad 4 WiFi 32 GB directly from Apple with no scratches and a one year warranty for $499. http://store.apple.com/us/product/FD514LL/A/refurbished-ipad-with-retina-display -wi-fi-32gb-white-4th-generation
Why would I buy yours?
I wouldn't pay more than $300 for a used model with your specs in perfect condition. But yours is far from perfect. I think your high point is $250 which is why I said 50%. -
I've had the iPod for a few months and it worked great. For some reason it went into recovery mode but I have no clue. I've always used the laptop I have with the same wifi. As soon as I plugged by ipod into the computer to recharge the battery it went into recovery mode.
Side note: I know almost nothing about computers.Error 3004
Resolve communication issues
Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers. -
turned of randomly.
have tried-
pressing the home and lock button at the same time
plugging it into itunes and restoring(still does not work, keeps saying error 28)
any other suggestions
i have not dropped it in the past
i just got this phone
PLEASE HELP!!!See This Discussion > https://discussions.apple.com/thread/4087808?start=0&tstart=0
-
I tried to update my ipad through wifi and followed the steps. It says that update is complete however i must connect to itunes and restore the updates but itines says i dont have permission to do so. KIndly assist on the stages to follow. Screen is black ad i unable to work on it.
Kindly give some suggestions
Regards
BanziHello Mayanii,
This display and behavior indicates that the iPad is in recovery mode and must be restored.
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT1808
Cheers,
Allen -
I just updated by iphone. I followed the instructions when it turned back on and now it's stuck at the iCloud terms and conditions screen.
I hit "agree" and it does nothing. Can turn it off at this point without screwing up the update?Hi there dmre,
You may want to try resetting the device as an initial troubleshooting step. Take a look at the article below for more information.
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
-Griff W. -
WHEN I TURN MY IPHONE 3S ON IT ASKS ME TO CONNECT TO ITUNES AND RESTORE. I HAVE DONE THIS 10 TIMES AND STILL GET THE SAME SCREEN. CAN ANYONE PLEASE HELP??
Has your phone been jailbroken? If so, you will likely never get it to work again.
You can try placing your phone in DFU mode (search google) and restoring. -
I tried to follow the instruction of buying iphone apps without a credit card. I follow the steps and I selected United States, but when I fill up the credit card info, i could not find the word "None". Anyone know what should I do?
When you tried to contact Support with the card's images how were you trying to do it, on your phone or a browser on your computer ? And have you tried a different browser to see if you get the same error message ?
As well as images of the card they might also want an image of its receipt.
And to contact Support you were using : http://www.apple.com/support/itunes/contact/ , and clicked on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes ? -
I had problems with my iphone 5. After hanging many times, I connected with itunes and restored the settings. But it didn't work. And my phone is now starting with "Hello" to newly activate. Again, it could not proceed but saying "cannot activate now".. please help me how to do. Thank you very much.
you will need to do a hard wipe or remember the password hard wipe can be found on youtube how to. but this will erase all data
-
I tried to follow the steps in recovery mode but itunes still can't detect it
i tried to follow the steps in recovery mode but itunes still can't detect it.
Ok ok. It did work the first time, however the phone got disconnected so then the phone turned itself on again.
I tried to repeat the same steps again but it did not show the itunes logo. It just turned on and went to the lock screen.
I did this for about 4-5 times. Each trial ending up with the same result.
So what i did, once the phone was connected to itunes i clicked the update button and waited for HOURS to finish the update.
It did restart and did whole other things. But it stopped and a black screen appeared with a text saying Iphone is disabled. Connect to iTunes.
Any suggestions on what to do next? I'm seriously feeling so frustrated right now.
So in case you didn't get it my phone was disabled after entering the wrong password too many times. Tried fixing it but it seemed to get worse.
Really desperate here. -
my ipod feel and now everytime i connect it 2 my computer i get the n/a on my desktop n when i go to restory it ... it say error 28 n the screen is black but when i do the recovorey steps the screen still looks the same so i dnt think it a black screen so idk if the fireware is messed up or what n idk if it broking or what n if ipod store will take it n give me a new 1
From the link at the bottom of my post:
Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors
iOS: Resolving update and restore alert messages
I would do what the article and if unsuccessful make an appointment at the Genius bar of an Apple store since you likely have a hardware problem. -
My iphone battery died and on charging the phone it asked me to connect to itunes and restore the phone.
If i restore the phone how can i get my data back and how can i check when i last backed up my phoneIf you have been syncing regularly as the iphone is designed, then you can sync the data back.
Regardless you will have to restore the iphone. -
since i have updated my iphone everytime i open an app it comes up with a message 'connect to itunes to use push notifications, may include alerts, sounds and icon badges, i have backed up my phone on itunes and restored phone but its still doing it can anyone help?
EmReturn the iPhone and get your money back. It has been
hacked/modified/jailbroken and likely cannot be made
operative. -
When I was updating my ipod touch 4g 8g 4.3.3 the USB came out and now it just shows connect to itunes and when i try to update it comes with error 6. I do all of the help things and nothing happoned
First see if placing the iPod in Recovery Mode will allow a restore.
Next try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If not successful then time for an appointment at the Genius Bar of an Apple store. You are not alone with this problem.
Maybe you are looking for
-
hi am geting blue ring turn turning when deploying my application and it showing a word downloading *** Using HTTP port 7101 *** *** Using SSL port 7102 *** "C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\Defaul
-
Standard vendor evaluation t.code S_ALR_87012077
Hi, In our system standard evaluation is all ready configured. When i am running program RFKKGRN it also updateing. But when i capmpared report from program S_ALR_87012078 with report S_ALR_87012077 i found that some vendors are not at all appearing
-
How do I include images in text as zoomable thumbnails in a pdf file?
I have Adobe Acrobat X Pro, and MS word, which is my usually set up for pdf files. I to write an essay that is limited to 2 pages, to save space, I want to create a clickable thumbnails in the text, that will simply display a full picture when I clic
-
Comparator for different classes
I have a crazy need to be able to hold a few hundred thousand objects in a Set. These objects can vary from Integers, Doubles to Strings. Normally it seems a HashSet would be the perfect implementation for this, however, this Set is built once and se
-
Need Help Opening Previous iWeb Site
I recently got a new hard drive. I am trying to open my website "doman" file, but iWeb will not open it (...it only opens a new iweb site and asks me what template I want to use). How can I open my previous published site?