HT201263 I holding home button iphone 5 does not start it is blank. itunes shows waiting for iphone and the applle icon and under line appears
I unable to restore my iphone 5. I keep on holding power and home button but it does not show apple icon and cable picture. If I try to restore from itunes
I get "Waiting for iphone" it stays forever and iphone show apple icon and line under it.
Hi there jey_osman,
You may find the troubleshooting steps in the articles below helpful.
iOS: Apple logo with progress bar after updating or restoring from backup
http://support.apple.com/kb/TS3681
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W.
Similar Messages
-
ok i have an iphone 4s ios6 on windows7 and every time i try to restore in itunes my iphone gets stuck showing apple logo and loading bar i have had it pluged in for over 3 hours i have tried i recovery ,ireb,tinyumbrella none seem to help ,any ideas if thers a solution for this
i have the same exact problem and im so frustrated. if you find a soulution can you let me know? i've been looking for ages and even tried a different computer
-
Hello...I´ve just updated my Iphone 4 with 5.1.1. and my Iphone does not start at all....Nothing... Help pls
Have you tried a reset by pressing and holding the sleep/wake button and the home button for 10-15 seconds until the Apple logo appears, ignore the red slider. Then turn back on. You won't lose any data doing the reset.
-
ICal on my iPhone does not sync with my Mac or iPad. I am using the cloud.
My iCal calendar on my iPhone does not sync with my Mac or iPad. I am on the cloud and every
thing else is syncing. I've looked at preferences and everything looks right...Welcome to the Apple Community.
First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings. -
When I connect the iphone does not start automatically Itunes Please help me
when I connect the iphone does not start automatically Itunes
Please help me
How to solve this problem that I havei've had a few issues like this.
I've found that it is an issue with items that are already on your phone.
several troubleshoots.
1) uncheck everything from syncing (apps, music, tv shows, movies, podcasts, etc), try to perform a sync, it most likely will work. Then, sync after checking each item individually (check the sync box for videos, then sync, check the sync box for podcasts, then sync, check the sync box for music, then sync, etc). One of two things will happen, 1) you will fix the problem, or 2) you will identify exactly what part of the sync setup is the culprit.
2) if the above doesn't work, I've found that it is likely an issue with files that are on your phone but your phone doesn't exaclty recognize (for example, I had copies of music on my phone that didn't show up in the music app, I went in on itunes and manually deleted those songs from my phone and that fixed the sync). to do this, check the "manually manage music and videos" box at the bottom of "summary" while your phone is connected to itunes. Then, go to the left hand pane in itunes and find your iphone device, click the drop-down arrow that shows all the categories for media on your iphone. Go to the music category in your iphone on itunes and delete all the music that shows up. Try to perform a sync - it likely will work. After this, you can uncheck the manually manage music box and re-sync your phone as normal
let me know if either works -
In Logic, Pro or Pro X Meta Events don't work correctly; for example inserting Stop Playback number 52 in a specific position the playhead stops wrongly several ticks before. Then the button play does not start.
Curious if what your describing is similar to issue 4 which starts around 9:15 in video...
https://youtu.be/q93jdOhi4Oc
If so this started for me, or at least I noticed it for the first time in LPX 10.1.1. What version of logic are you running?
I've recently found that this issue also affects note timing on instrument tracks that use the "External Instrument" plugin. -
My iPhone 3GS on iOS 5.1 will randomly stop what I'm doing show a black screen then the spinning icon and then it shows my lockscreen. It takes about a minute to do this and it does it about 30 times a day. How do I fix this? It is EXTREMELY ANNOYING!
No, sounds like when you dropped it an cracked the screen it may have also damaged the logic board or the repair person damaged a cable.
-
hello
i bought my first mac and i want to become an iOS developer and creat app for iPhone iPad but now i have only iPad 4 and i want to buy iPhone 5s but I'm not sure to buy iphone5s now or wait for iPhone 6 because iphone6 may have bigger screen if i buy iphone5s now can i creat app for iPhone 6 if it has bigger display without buying it just test it on iPhone 5s
thanksOne of my favorite things about developing for iOS using Xcode is the Simulator. It runs any of the iOS devices simulated right on your Mac. If you don't have a hardware device to test your application on, the Xcode simulator will surely be your best friend.
So to answer your question less vaguely, yes. You can own the iPhone 5s and develop for the 6. There is no real release information of the iPhone 6 at the time anyways, so I would not let it play too large of a factor in your decision. -
I Have a folder with an interrogation mark blinking and the computer does not start. Anybody?, I Have a folder with an interrogation mark blinking and the computer does not start. Anybody?
Here is some information and troubleshooting steps from Apple:
http://support.apple.com/kb/TS1440 -
Successfully set up TC (the latest one) for MBP. I can access to TC wirelessly. Tried to access from my PC too but PC does not even detect TC (as storage), while PC is connected in the same network and can access to the internet. Anything missed?
Load the airport utility for windows.. it has several parts.. the key one is bonjour for windows which helps windows find apple network devices.
The TC should also be setup with names that windows can use.. ie short, no spaces and pure alphanumeric.
So Fred Blog's Airport Time Capsule
Is not a valid windows name.
TCgen5 is. -
my iphone will not start on its own or when it is plugged into the computer... what do i do?
Go get it fixed.
-
powerbook g4 - does not start up...it shows kernel panic screen...how do i fix/resolve this problem?
In the overwhelming majority of cases, kernel panic indicates a severe hardware problem. Braby and Allan pointed to useful things. If you can boot from CD / DVD and reinstall without any kernel panic, then may be a software problem, but this is less probable. You must check, anyway.
If you have a 2nd mac around and a firewire cable, you may try to restart the ill mac in target mode and connect it to a healthy mac to see whether it may be used in target mode. -
My grandson played with my 4th generation iPod touch and the phone icon and contacts icon are gone. I have gone to settings and done the "reset all settings" and "reset home screen layout" with no success. I also did a hard reset. No luck. I can get to my apps through the search screen but no icons.Help?
Try doing a Spotlight search for the Contacts app.
Read this for doing a search:
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/spotlight -search/
(Skip to the section for Spotlight on iOS)
(Note that my links to other pages may promote my organization, and this should not be taken as an endorsement by Apple) -
hi, when i am sync my books from my mac to ipad even after 24 hours sync, itunes show "wait for items to copy" and the books in ipad are still not fully loaded.
how do i fix this, i have a large collection of books around 12000 booksNobody knows? Not even administrators?
Please it would be really nice to have help on that to take all the benefit of the remote app.
Thank you very much in advance. -
My new iphone does not start up
i bought the iphone6 yesterday and I opened it today. It does not start up and it shows just a low battery sign and then it turns black. What shall i Do?
Well, Apple's policy on the iPhone warranty outside of the country where it was purchased is:
IMPORTANT RESTRICTION FOR iPHONE AND iPAD SERVICE.
Apple may restrict warranty service for iPhone and iPad to the country where Apple or its Authorized Distributors originally sold the device.
So, it is likely that you will not be able to get it serviced here. However, it would be worthwhile to contact your local Apple Store to see if they will take a look at it for you.
Cheers,
GB
Maybe you are looking for
-
None of the dropdowns on Tools Palette work ex: Type Tool, Pen Tool, Pencil Tool,etc. I cannot get the dropdowns for any of these to appear. I've tried uninstalling and reinstalling the entire suite - reinstalling each separately - no luck. I'm sure
-
Photoshop 4.0 Install problem
I had a hard drive failure and have to re install photo shop 4. ( I won't be buying new photo shop until December). I used the program compatibility wizard to get the splash screen to appear but the on screen buttons do not respond. I tried the setup
-
I had a 50d and just bought a 7d. my photoshop cs4 was acting up so i unitstalled it. I reinstalled it from my hard copy (cd) and now i can not get it to open ps RAW....
-
hi, i made process instruction catogeries but unable to indentify the right charecterstics the requirement is to do the GI and inspection results to be enterd through pi sheet iam generating controll receipe and respective pi sheet on pi sheet i need
-
Stop Aperture from auto launching when connecting an iPhone
Recently installed Aperture 3. The library sits on an external which is connected to the computer via firewire. Every now and then (3 times in the last 12 hours), Aperture launches without being told to. Quite annoying. Does anyone have a fix? Thanks