HT201263 I was installing the IOS7 to my Iphone 5 after a while, the phone showed the connect to itunes symbol. I connected it to itunes on my desktop. It said I had to restore my Iphone. I clicked on restore. After a few minutes I received an erro
I tried to download IOS7 to my Iphone 5. After quite a while, my phone had the symbol to connect to Itunes. I went to our desktop and did this. A message said I had to restore my phone. I clicked on restore. In a short while, I received a message saying my phone couldn't be restored and received error 3194 "This device isn't eligible for the requested build"
So how do I fix this? Can you help me?
Thanks
Brenda
http://support.apple.com/kb/TS4451
Similar Messages
-
I recently backed up my iphone to itunes, when after backing up a message showed that I needed to update my iphone. I clicked ok, and after updating, it said I had to restore my phone to its factory settings. I cannot find where it backed up all of my pictures from my phone.
If you backed up the device, all the data is in the backup. Restore the backup.
A better question is why would an intelligent person not copy the pictures from the device to the computer regularly, especially before attempting an update, as the device is designed to be used? -
As the title says.
I was installing the new EFI software update on my macbook pro and I became stuck on the grey screen with the window that said "installing 2 items", its been on the same screen for 2 1/2 hours. does anyone know what I can do?
I don't want to restart it because im scared that something might go wrong.
operating lionLimitLess- wrote:
Hi,
I had the power supply connected when I attempted it previously but even so my problem occurred. My rom is different and so I still need to update it.
Thanks
I wanted to mark your answer helpful too but I didn't know that I could only put it for 2 answers. Sorry
That was good advice by G-N and s/he is correct about it. Unfortunately, ASC allows only 2 "helpful" and 1 "correct" marks per thread. -
I updated my ipod touch4 and it said i had to plug it up to itunes which i did then when i plugged it in it said i had to restore which i did and i was very upset and it restored it i guess and now its frozen on the apple logo how do i fix it? ps my ipod home button doesnt work.
Try as much as you can. When it says to place in recovery mode use this program instead.
RecBoot: Easy Way to Put iPhone into Recovery Mode
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
When playing music from Ipod in my car, music suddenly stops and message appears to restore in iTunes. After a few minutes, it starts to play again. I hear a click and the apple logo shows on the screen. Any ideas??
You may need to do a Restore in iTunes.
Clicking sounds from an iPod that has a hard drive is probably not a good thing. It is possible that your iPod's hard drive is becoming unreliable. -
I was installing the ios 6 on my iphone 3GS and an error occured and since then it's hanged up and not working. Please suggest some solution
the same thing here! each time its suppose to register with my network, it cant. im wondering if its a hardware problem
-
As I was installing the Windows 7 on my Imacwith the bootcamp and stated how I wanted to divide the drive I put 160, but I want to add more space because of the adobe software it will not install two of them, so how can I add more on the drive space to from 160 to 250? please help thank you.
I'm not sure this is what you're looking for, but it might help:
"If you made the Windows partition too small
First, back up all the information on your Windows partition. Then run Boot Camp
Assistant to restore your disk to a single volume. Restart your computer and use Boot
Camp Assistant to partition the disk again and reinstall Windows. Don’t forget to install
the Boot Camp drivers after installing Windows."
(from Bootcamp Assistant Manual see pg 22) -
Hi there, I updated to ML about 3 weeks ago I can not get in to my pps to download it again as when it was installing the first time I decided to skip the part where it said do i want to do the iTunes and iCloud thing. any suggentions how to go back and change that part or do I have to download it again.
Thanks
GeeRicTo set up iCloud, open System Preferences > iCloud, and follow its steps to use iCloud
-
I WAS INSTALLING THE IOS6 UPDATE ON MY I PHONE 4S AND THE SCREN TURNED BLACK NOW WE CANNOT GET IT TO COME ON OR DO ANYTHING ANY IDEA WHAT I NEED TO DO
you may put your device in dfu mode then connect it to itune ,after that there may be a message come up and say you have to restore your device. Restore your device to 5.1.1 then when you finish update it from itune not from your device directly.
-
An error occured when i was installing the Itunes. as a reslut, i can;t finish the itunes installing. the computer says the problem is probabaly about microsoft.vc80.crt or something. My computer is Vista and 32, by the way.
Did you manage to get it working mine disappeared after I while I managed to download it but now my laptop/iTunes won't recognise my iPhone!
-
When I try to uninstall iTunes I get a message saying iTunes 64 msi can not be located and I should enter an alternate path. How would I know where it it is? I get the same message when trying to install the update to iTunes 10.6.1.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
i tried updating my ipod, and then it turned off, and then just said connect to itunes, and when i did, it said i had to restore it. so, i restored it, and it did nothing and still said connect to itunes. help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
or
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Question
After a few minutes, the page down won't work without clicking the mouse pointer on the page I am reading to activate page down again. Is there a way to go back to page down working every time without having to click the page first?Today, two other users reported issues with the back-forward history list dropping down if they hovered the mouse pointer over the back or forward button -- without clicking -- and then moved the pointer downwards. One user was on a touchpad, I don't know about the other user. Are you experiencing anything like that?
-
When I try to install the update for iTunes, I keep getting the message "the application attempted to load the C runtime library incorrectly. Contact the vendor. I don't know if it's related, but my Microsoft Outlook is totally f*k up. What's going on?
Hey I finally got an older vesion of itunes to work!!! 10.7 x64 for windows 7
After uninstalling all apple products even quicktime
I had to delete everything from (program files, and program files x64, program data,)
And all downloads from apple, and I went in to search deleted other stuff from apple, and itunes
But definently not my itunes library and Playlist
Down loaded 10.7 x64 for windows 7, but checked (do not start when done)
Then I emptied my recycling bin and restarted my PC
I ran geek tech tool box same as reg cure pro, also PC Tools registry cleaner, and CC Cleaner
Then I emptied my recycling bin and restarted my PC
And wallah... It finally works, and I Love the older version anyways.
Easier to download and transfer music!!!!! -
I could not install the upgrade for iTunes and Error Message said " Can't start because MSVCR80.dll is missing". Reinstalling has NOT helped. . Is the fault with the Apple iTunes upgrade?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Maybe you are looking for
-
Problem While exporting HTML table to Excel(.CSV) in SharePoint 2010
Hi , I was exporting HTML table to .CSV file. Problem is if any field contains '>' or '<' symbol then after exporting to .CSV, it was showing like '>' and '<' and the code is as below. //Export HTML table to CSV function toCSV() { var da
-
Itunes wont connect me with the iphone server to upgrade
I am getting really ticked about this one. I had this in both tiger and now in Leopard. I cannot connect with the itunes store to access my iphone update. the request times out, and then itunes gives me an error message saying I do not have permissio
-
I am have planing application in which accounts dimension has Text field members say Project justification i.e. whenever project gets budgeted,business user wants to give justification for project. In Financial reporting, I want to report on project
-
JPEG and TIFF Photos Appear Blurry in Photoshop
Hello, After placing my TIFF and JPEG files into photoshop they suddenly get very blurry and out of focus. When I open the original photos in finder they are clear. I am wondering what the problem is here. I use Photoshop CS5.1. Help appreciated. Tha
-
Hi, I have used System.getProperty("java.io.tmpdir") to get the temp folder. Unfortunatelly on the windows platform it returns C:\DOCUME~1\MyUseName\LOCALS~1\Temp\while on linux it returns /tmpso basically the slash "/" is missing on the linux. It se