HT201263 ipad went blank aftter iOS7 update

Hi
My ipad 4 went blank after an update pertaining to some update.
i had updated to iOS7 but today there was another update after which my ipad went blank.
i have tried to reset it but it does not respond at all and the scrren is blank.
kindly help

If you explain what you mean by "I tried to reset it" that would probably helpful. That word "reset" is used so loosely on this forum, so if you could state exactly what "reset" you performed, that would be a good starting point.

Similar Messages

  • HT4623 I updated my ipad 3 with the ios7 update. Now the screen shows the itunes icon and a pic of the plug in (as to plug into itunes)  I can't get it to go away or to access my ipad.  Any hints?

    I updated my ipad 3 with the ios7 update.  Now the screen shows the itunes icon and a pic of the plug in (as to plug into itunes)  When I do this it wants to restore my ipad, which I have already done.  I can't get out of this screen.  Any hints on what to do next?

    Something went wrong with your update; you are in Recovery Mode.
    Follow step 1 to 6 closely to recover your iPad.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times

  • My IPAD went blank and won't restart...and ideas?

    My IPAD went blank and won't restart...and ideas?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • My ipad went blank last night for no apparent reason.  It was on one minute, and then completely dark.  I didn't touch it, it just seemed to have died.  I tried turning it back on/off, but nothing happens.  Anyone else have a similar situation?

    My ipad went blank last night for no apparent reason.  It was on one minute, and then completely dark.  I didn't touch it, it just seemed to have died.  I tried turning it back on/off, but nothing happens.  Anyone else have a similar situation?

    Thansk for the reply King_Penguin...let me elaborate and see what you think...I had the ipad2 in the office and saw the battery was getting really low.  I tried charging it with the iphone charger (connects to my pc at work).  It took a while, but it got enough juice in the ipad2 to bring it back to life.  when I got home, I hooked it up, and got to about 50%.  All was fine, then I was attempting to hook it up to my TV with the AV adapter (or VGA adapter, whatever it is), left the ipad alone for a minute, came back to it, and that's when it went dark.  I tried the home/sleep buttons, but only for about 5 seconds...any other suggestions in case that doesn't work?  Thanks again...

  • IPad was disabled after ios7 update. How do I enable it?

    iPad was disabled after ios7 update.It would not accept my passcode.
    How do I enable it?

    There are instructions on this page for resetting a disabled device : http://support.apple.com/kb/HT1212 - you can then restore/resync your content to it

  • HT201412 My ipad went blank and will not restart

    My ipad went blank and will not restart.  What can I do?

    Could be the battery is completely drained?
    Use the charger that came with the iPad. Plug the charger into a known good wall outlet and connect your iPad. Let it charge for at least an hour. Then, while still connected to the charger, reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. If the iPad starts, fine. Let it continue to charge until the battery is at 100%. If it does not charge make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • My ipad went blank and I cannot get turned back on.. ??

    My ipad went blank.. turned off...  what can I do to turn it baCK ON...? tHE ON/OFF SWITCH doesnt turn it back on...

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Screen went blank after iOS7 install

    I was successful in upgrading to iOS7 on my iphone 4s but then while browsing the screen went blank. With a blank screen, I can not turn off - should I reset?

    you are aware that while  Applejack worked great on our PowerMacs, it had to be updated for Intel and also that you would now need versions of anything that are Snow Leopard compatible.
    Seeing it was running or had 10.4.6+ minimum, that could mean that the disk drive is also just as old. Not that it died, I still keep some around for backup and such going back even further.
    But did you ERASE the hard drive with SL DVD before installing? that way works better as there are changes in disk structure and partitions and works better than not doing so, and definitely better than an upgrade in place. Setup Assistant can help immport what you need.
    You might want to clone the system to a new drive anyway now that it does boot. You can do so with the DVD and DU Restore, or with SuperDuper or Carbon Copy Cloner. CCC is no longer 'free"/shareware but has been improved and supports Lion+ much better, and easy to use to selectively copy - like to not move non system, and move those to a data-only drive.
    just some ideas.

  • Ipad lost wifi after ios7 update but works when close to signal.

    Hi
    Ive read lot of posts that have the same issue as mine except for one difference. My ipad will reconnect if I am very close to the router or my range extender.
    I have had three years of faultless use from my ipad and it lost wifi and bluetooth connectivity immediately after updating to ios7.0.4.
    Ive tried all the usual remedies as in updating the router firmware, resetting the ipad, switching wifi on and off etc. All to no avail.
    Unfortunately it still wont find a wifi signal where all my other apple and samsung gear will find multiple signals easily.
    I found out that if im within 20cm of my range extender or within 2-3 metres of my asus router i get about 2 bars of signal and it works accordingly. If I move beyond that range my signal drops out.
    Ive ordered a new Wifi antenna but wanted to know if anyone else has got some ideas prior to me fitting it.
    Thanks for any help

    To Diavonex,
    Thanks for your reply,
    I took the ipad for a drive to see if it could find a signal.
    My Samsung S4 was continuously picking up new Wifi signals but my Ipad didnt find a single one.
    So I went into my local computer shop and got within two metres of their wifi antenna and got a 2-3 bar signal. I literally took one big step away from it and I lost the signal and it wouildnt return until I approached the aerial agian.
    The computer tech just laughed and said thats Apple for you.
    What I cant work out is that it had been perfect in all conditons for years until the ios7 update.
    Thanks

  • HT201412 i have a apple ipad tried to download ios7 update is is now not responding

    hi my ipad has not responded to the download of ios7 update. have tried reseting still no luck can you please help

    Did you try the download over-the-air or using iTunes?  The download is huge ... have you waited sufficient time?
    Anyway if the reset failed, try recovery mode as follows.  You may have to try to get into recovery mode more than once to succeed:
    HT1808
    If you have a choice, try using iTunes on your computer to download iOS 7.

  • I can't access the itunes store from my ipad mini after the iOS7 update

    I can't access the itunes store from my ipad mini after updating the latest iOS7. Does anyone have answers to solving this?

    Ive been through various threads on here.
    There has been quite a few things said and some people are having luck with.
    Reset all your settings works, but only once. when you shut down and open back up same problem.
    Ive tried changing how my cookies respond, this doesnt work either.
    My app store loads in a second, fastest its ever been.
    Ive noticed that when your in settings and click on something eles it takes maybe a second or two before it changes to the next screen something thats never happened on 6
    it seems very laggy and slow on somethings and super fast on others
    Come on Apple get yer finger out and sort this out soon, its you thats loosing my cash as I cant buy any music!!!
    I have an Ipad mini.

  • TS4268 iMessage not working on iPad and iPod after IOS7 update.

    My iMessage is not working on both my iPad and iPod. I have done everything the apple website has said to do and I don't have the options suggested. They just simply will not send. Can someone please help me fix it?
    My iPad is updated to IOS 7.0.2 and my iPod is IOS 6.1.2.

    Yes, I've tried everything, logged in and out of everything, re-synced the ipad....settings ar ethe same on both devices but the ipad does not message and the phone does.
    From what I have read I'm not the only one with this issue since the iOS7 upgrade.

  • Ipad wont verify my ios7 update

    I downloaded iOS7 directly to my iPad Mini (16gb) and when it came to install, it would verify update for about two minutes after accepting the terms and then it said it could not install at this time. Help!

    Wait and try back in a bit. There seems to be some issue with the servers, likely very heavy traffic.

  • HT4623 My iPad does not offer ios7 update!

    I am trying to update my apps, but it will not unless I get iOS 6 or higher. My iPad does not allow me to update my os.

    If you have the 1st generation iPad, you can't get iOS 6 and later.

  • HT201263 iPad series one will not update to iOS software

    IPad series one is totally restored to original software I cannot see software update in general. If I click on software on iTunes account it will not allow me.
    Could anyone advise me from start to finish how set my window vista to allow the down load to take place.
    Many thanks.

    What download?
    You can only go to iOS 5.1.1 on the iPad 1st gen.

Maybe you are looking for

  • Enhancing F4 Search Help Issue - Standard Component

    Hello All, We have a requirement in SRM to customize couple of standard Search helps attached to the Webdynpro components. As such I know the concept of how we can handle this requirement but hitting an issue. Standard Working scenario - 1) Standard

  • Opening Documents in Word Crashes the Server

    I posted this in the "Using OS X" forum, since I didn't believe the problem to be OS X Server-specific, but haven't received any response at all. So If no one objects, I'm going to give it a try here: I'm running OSX Server 10.4.11 (none of the other

  • On migration of Mac Office Excel the date values are changed to mm/dd/yy

    I recently upgraded to new iMac and migrated my MacOffice 2008 and now find that all my date data is forced into the American date format (mm/dd/yy). I have phoned Apple support  - no help! Microsoft no online help. Not only is the entry data changed

  • July PSU 11.2.0.3 patch apply failed

    We installed oracle GI (Grid Infrastructure) and Oracle 11.2.0.3 on a single node Linux.    The GI home is owned by the user grid to include ASM storage configuration and Oracle home is owned by user oracle.   After we installed GI home, configured A

  • How to deploy manually the Smart Ticket1.1 from the JavaBluePrints?

    Hi, I will like to know that how to deploy the Smart Ticket1.1 which from the JavaBluePrints with the use of J2EE1.4 SDK? I had deployed the .ear file under the Enterprise Applcation. However, the problem is how to establish the database connection o