HT201263 Iphone in restore mode but will not finish restoring
I'm trying to restore my Iphone 4s but it stops while verifying the software. Phone us unusable. Cannot get back to any home screen, turning it off or reseting it doesn't work. Itunes is fully updated. Get error code 29. Please help.
Yeah, it's broken.
Either buy a new phone or bring it in to Apple, along with $149, for an out of warranty replacement.
Similar Messages
-
What does it mean when my Ipod shows me an itunes icon but doesn't let me go to my home screen AND when I plug it into my Macbook it tells me my Ipod is in recovery mode AND will not be restored!?!?!?! HELP!!!
. . . sparse bundle could not be accessed (error -1)
-
I have a tiscali email account set up on my iPhone it receives emails but will not send - any one had the same issue ?
Of course you can't it is a generic document for use worldwide on every carrier mail service
The link will tell you how to set up with the info you will have received from TalkTalk when they installed your broadband
You just add that info for SMTP settings
in iPhone
settings>>>>mail contacts a7 calendars>>>chose relevant service (tiscali or TT which ever it is called >>>outgoing mail server
all as decribed in the above document
now read the doc again and follow the instructions once you have established the correct settings from your
TT documentation -
Hi, I downloaded some Apps and they all appear on my iphone screen saying waiting but will not fully download. On my account they are showing as downloaded so won't let me download them again. Any suggestions?
Hello Funkylildiva,
Thank you for contacting Apple Support Communities.
The following article addresses downloading past purchases.
Download past purchases
http://support.apple.com/kb/HT2519
If, after going through this article, you are still having problems, there are links to report a problem or contact iTunes Store suppport at the bottom.
Regards,
Jeff D. -
have an apple TV 1st generation - it froze downloading a trailer and had to be unplugged. Since then I cannot access the apple tv menu. When I run diagnostics it says it is operating properly but will not factory restore. What can I try?
Apologies, I was looking at the wrong schematic for the Apple TV 1. There isn't a button. So lets try this instead...
Remove the power cord and wait 20 seconds.
Plug it back in and let it boot (Give it 10 minutes, it's being tempremental)
Try and navigate to the the advanced menu and do a factory restore
If that doesn't work then if you are using the white remote hold down the menu button for six seconds and release this should bring up a hidden menu which will allow you to access the advanced configuration settings.
Again, if this fails there isn't much to do than tap it with a hammer to see if that fixes it (hard to believe how many times that actually works. (No responsibility taken if it breaks!, but at least you'd have a good reason to buy Apple TV 3) -
Hello
Please help me
I have worked erased
IPhone exists with me
But did not finish the process erased
What is the solution??Post in your native language, the above make not sense.
-
HT201401 my iPhone is fully charged but will not turn on at all ?
my iphone 4 is fully charged but will not turn on ?
Welcome to Apple Communities
Hold Home and Sleep buttons -
The slide show runs in "live mode" but will not run from the browser.
Here is the link to the web page http://www.williamshomesteadranch.com/welldone.html
This is the first time that I've tried to use a widget and it looks good, but will not run fromthe browser.The answer to the problem is very simple, the main images cannot be found. Please have a look at the following markup starting with line 305 or thereabouts:
<ul id="ImageSlideShow" title="Jesse the Border Collie">
<li><a href=Spry-UI-1.7/jackandjesse/jacksjesse251x270.jpg src="Spry-UI-1.7/jackandjesse/jacksjesse251x270.jpg" title="Jesse"><img src="Spry-UI-1.7/jackandjesse/jacksjessethumbnail.jpg" alt="photos-1.jpg" /></a></li>
<li><a href=Spry-UI-1.7/jackandjesse/jackandjesseonbeach257x381.jpg src="Spry-UI-1.7/jackandjesse/jackandjesseonbeach257x381.jpg" title="Jesse and his Friend"><img src="Spry-UI-1.7/jackandjesse/jackandjesseonbeachthumbnail.jpg" alt="photos-2.jpg" /></a></li>
<li><a href=Spry-UI-1.7/jackandjesse/jackjessesoccer251x378.jpg src="Spry-UI-1.7/jackandjesse/jackjessesoccer251x378.jpg" title="Jesse playing soccer with his friend"><img src="Spry-UI-1.7/jackandjesse/jackjessesoccerthumbnail.jpg" alt="photos-3.jpg" /></a></li>
<li><a href=Spry-UI-1.7/jackandjesse/jackjesserestbeach365x246.jpg src="Spry-UI-1.7/jackandjesse/jackjesserestbeach365x246.jpg" title="Jesse and his Friend resting"><img src="Spry-UI-1.7/jackandjesse/jackjesserestbeachthumbnail.jpg" alt="photos-4.jpg" /></a></li>
<li><a href=Spry-UI-1.7/jackandjesse/jackjessedwnbeach250x350.jpg src="Spry-UI-1.7/jackandjesse/jackjessedwnbeach250x350.jpg" title="A Walk down the Beach"><img src="Spry-UI-1.7/jackandjesse/jackjessedwnbeachthumbnail.jpg" alt="photos-5.jpg" /></a></li>
</ul>
Now take a closer look at the first image.
The thumbnail is jacksjessethumbnail.jpg and, according to the markup, can be found at http://www.williamshomesteadranch.com/Spry-UI-1.7/jackandjesse/jacksjessethumbnail.jpg. Bless me, the thumnail is there. No problem here.
The main image is jacksjesse251x270.jpg and, according to the markup, can be found at http://www.williamshomesteadranch.com/Spry-UI-1.7/jackandjesse/jacksjesse251x270.jpg. Lo and behold, the image cannot be found. The problem must be here.
We can do the same analysis for each of the remaining images with the same result. This means that the main images have not been uploaded to the correct folder or that the path to the main image is incorrect.
Assuming that the path to the main image is correct, using DW, have a look in your local folder as follows
Then 1. single left click on the jackandjesse folder to highlight it, 2. click on the symchronise button, 3. make sure you have the correct selections in the Synchronize Files dialog and click on preview.
Then click on OK as per
and the files should be uploaded to the correct remote folder.
Gramps -
Reset all settings on iPad but will not finish after 2 days!
Tried to reset all settings and delete data on iPad so i could pass it on to my wife but it has got locked into resetting mode (little rotating dial in middle of black screen) for more than 24 hours and will not finish, nor will any buttons work nor will iTunes recognize it or my pc recognize it when I connect it with UsB
Try to do hard reset. This won't delete your data stored on iPad.
Press and hold the Sleep/Wake button
Press and hold on the Home button
Keep holding both buttons until the display turns off and back on with Apple logo on it.
If this works in order to erase all date: Go to general settings/ choose reset/tap erase all content and settings -
1) FF 15.0.0.4619 on Windows PC 64 bit machine. No themes; about a dozen fairly standard plug-ins; a few extensions - fairly vanilla setup. Been having occassional problem this past week in viewing web PDFs.
Crash occurred after some program (adobe ??) wanted to do routine update.
2) Upon clicking FF icon pop up indicates "problem and unexpected crash" but clicking details button does NOT provide any info. Clicking on Restart FF button offers me option to Start in Safe Mode or Quit FF.
3) Starts in Safe Mode and first time I did that FF reported Java as being disabled and NOT upto date. Did Java update/install (Java Platform SE 7 U7 10.7.2). FF still will not start except in Safe Mode.
4) Re-booted computer ... Clicking FF icon brings up pop up with problem and crash sentence but no details. Following screen offers Reset to Default option, and upon clicking Reset it takes me back to the same pop up - so I am stuck in a loop that seems to accomplish nothing. Using Reset upon entering Sage Mode results in same loop.
I really hate using IE so appreciate any assistance in getting back to beloved FF.http://kb.mozillazine.org/Standard_diagnostic_%28Firefox%29
-
The newest version of iTunes begins downloading but will not finish and install.
I have just purchased a new MacBook Pro, and the App Store lists iTunes 12.1 as an update to be downloaded and installed. I have tried multiple times but it will not install and continues to show up as an update. Is anyone else having this problem? If not, what do you suggest I do to solve the problem. All the other updated downloaded and installed with no problem.
James Brown23 wrote:
... the App Store lists iTunes 12.1 as an update to be downloaded and installed.
That is not possible, as iTunes 12.1 has not been released yet.
The current version of iTunes is 12.0.1.
Get it from:
http://www.apple.com/itunes/download -
Songs downloaded, but will not finish processing
i have two songs just sitting in my downloads with the description "processing file" any ways i can get them processed and into my library?
thanks.Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc. -
Hello... Please help me... how can i resolve this problem... please help... when i update this device then this is problem is shown and after update ios I could not use iphone for a single days...
See "What does iTunes back up?" here:
http://support.apple.com/kb/HT4946
That is what you will get back. You will lose other things (example, mail messages). -
Long story about what happened but basically I was using the iPad (first generation without retina display) to watch TV at one point it had 20% battery so I plugged it in then it wasn't charging and I didn't realize so it got to 5% and shut off. I plugged it in to charge it but it just kept shutting down and showing the apple logo, then briefly showing me my home screen before shutting off again. I waited a while to see if it would charge, while it continued to turn off and on by itself. Finally, I unplugged it to see if it had gotten any charge but it just told me to plug it in again. I plugged it into a different charger, same thing. I decided to try connecting it to a computer and it stopped turning on but it did not seem to charge. I tried restoring it as it said in the article. It worked until it got to restoring the iPad from the backup that I had because it immediately shutdown before I could continue. I tried to restore it a second time but still it shut down! I'm so frusturated and I cannot afford to get a new iPad, I need it for school and there is no Apple store for 80 miles nor do I have any insurance or warranty on it! (Obviously considering it's the first iPad to ever come out.) I really don't know what to do! HELP
Try this Support Article > http://support.apple.com/kb/HT1808
-
Is it Dead? ipod mini goes into disk mode, but will not reset or restore
and is not recognized by the computer (Vista) or by iTunes. I have also tried to connect it to different usb ports and to different computers (3). Same result with all of them.
Before the problems, I had attempted to install compact flash (adapter with 8gb micro sd memory card).
Any thoughts?Hi,
Again, this is a problem with the Logic Board. When something metallic or conductive (screwdriver/watch/finger) shorts two components on the board. I can sort this out for you, if you don't feel confident doing the repair yourself.
Thanks,
Mark
<Edited by Host>
Maybe you are looking for
-
Encore can't burn more than one DVD at a time: Sense Code 56400
For a long time now I've been unable to burn multiple DVD's at a time. I burn more than one and I get an error and have to make a coaster out of yet another DVD I just upgraded to 24 gb of DDR3 PC 1600 RAM, I have an 6 Core Processor, I have 7.8 on e
-
Dear All, If I change the House Bank Currency, do I also have to change the currency in the GL account too or it can remain the local currency? Thanx Rosalyn
-
Can't import from idvd/iphoto into final cut
New to macpro. I was able to make a dvd in idvd but when i try to import it into final cut express hd i get "quicktime couldn't parse it -43". It won't import anything i make in either idvd or iphoto, from the files or a dvd. Please make answer as si
-
Why can't I post pictures on ebay with FireFox? I have to switch to IE to use ebay. I always get the error message: "0000\Root\mg.bmp path not found."
-
hi guys, i am currently using java class to read CSV files. my example code is String str = dataFile.readLine(); String[] words = str.split (","); i do not wish to take the , within brackets to be splitted up as in (today,tomorrow), after splitting t