HT201263 iphone4 stopped working, restore does nothing but show error 14

One day my phone just crapped out on me. I tried charging it but nothing works, so I decided to totally factory restore it. only that didnt work and now the phone is stuck on the spple screen. The restore gets to the end and then pops uo error 14 and cancelles the restpre. The phone does absolutely nothing and i am desparite. Please help!

One day my phone just crapped out on me. I tried charging it but nothing works, so I decided to totally factory restore it. only that didnt work and now the phone is stuck on the spple screen. The restore gets to the end and then pops uo error 14 and cancelles the restpre. The phone does absolutely nothing and i am desparite. Please help!

Similar Messages

  • I installed firefox but when trying to download web items I get a message that internet explorer has stopped working and does nothing but close program.

    I installed firefox but when trying to download web items I get a message that internet explorer has stopped working and does nothing but close program.

    See:
    * https://support.mozilla.com/en-US/kb/Firefox%20crashes%20when%20you%20open%20it

  • Camera Zoom stopped working - trackball does nothing. Very strange fault.

    I just came to take a photo using my Curve 8900 still shot camera feature.
    Normally moving the trackball towards 12 o clock position zooms the shot in slightly
    and moving it to the 6 oclock position zooms back out to 1:00x
    But today I noticed it doesn't work at all.   The trackball functions perfectly for scrolling up and down menu lists.
    Also it works properly in all directions when zooming an existing photo.
    It's just that the zoom function when aiming a shot to take the picture has just ceased to function.
    Makes no difference what resolution it's set to.  I have mine set to Superfine and 2048 x 1536 pixels and Flash and White Balance both set to Automatic.   I can't even make a key press substitute for zoom such as Z as that doesn't bring the function back.
    Can the trackball stop working in the camera but be working in all other applications? 
    I'm mystified by this one.
    Hope someone knows what's happening here.
    Plado
    Laurie Prior
    Solved!
    Go to Solution.

    Dear Plado (That's me!)
    Have you tried switching the phone off and back on again as in a Reboot?
    Yes I have tried that but it made no difference.
    OK have you tried turning off and taking the battery out and doing a cold boot?
    No but I will do and see if it makes any difference!
    Did it work ?
    Yes it did, and the zoom is now back working again and shows a zoom level from 1.0 to 2.0 in .25x increments.
    Well I never ! Who'd have thought it?
    I'm still none the wiser as to why it needed a cold boot or why it got stuck without prompting from me.
    It's just one of those things. A sort of a blob, with eyeballs that throb, just one of those things !
    So thanks to anyone who felt like replying to this, the problem is solved but I'd still like to know why it stopped working.
    Plado
    Laurie Prior

  • Itunes 64-bit on Windows & 64-bit does nothing but give errors!

    I've been trying to connect Iphone 3g 4.0.1 on Windows7 64-bit since last 5 days! Tried almost all the tips found on internet regarding this issue and none worked! At first simply downloaded the latest iTunes 9 (64-bit). It didnt work at all and I ended up seeing different errors. Then read this;
    http://www.sevenforums.com/installation-setup/4318-release-notes-important-issue s-beta-release-windows-7-a.html
    Tried that too and still getting nothing but errors. In last 5 days I encountered the following variety of errors;
    Device Manager -> Portable Device -> MTP Usb Devie -> Device cannot start (Code 10)
    Device Manager -> Portable Device -> Apple Iphone -> Device cannot start (Code 10)
    iTunes -> iTunes could not connect to this iPhone because an unknown error occurred (0xE8000065)
    iTunes -> iTunes could not connect to the iPhone "iPhone" because an unknown error occurred (0xE8000023)
    iTunes -> iTunes could not connect to the iPhone "iPhone" because an unknown error occurred (0xE8000035)
    iTunes -> iTunes could not connect to the iPhone because an invalid response was received from the device (0xE8000001)
    I even tried programs like iPhone Explorer, DiscAid, iFun-box etc. None worked. And now looking for a final answer. Will it work on Windows 7 or not? I am too tired of trying now.

    I don't know if this will help, but folks on Windows systems (typically laptops) with PM55 chipsets (like their brethen with P55 chipsets and other chipsets in the 5 series and 3400 series) have been reporting a lot of trouble with iPod/iPhone syncing (in particular, 0xE0000065 error messages, but the symptoms may vary).
    In cases where no BIOS updates are available, and the BIOS does not have a user configurable C-STATE setting, some success has been achieved by using an old trick ... changing the power management settings on the USB Host controllers, as per the following document:
    http://support.apple.com/kb/TS1401
    When attempting to connect iPhone or iPod touch, you may see one or more of the following error messages:
    ▪ iTunes could not connect to this iPhone because an unknown error occurred (0xE8000065)
    ▪ iTunes could not connect to this iPhone because an unknown error occurred (0xE800000a)
    ▪ iTunes could not connect to this iPhone because an unknown error occurred (0xE800006b)
    ▪ iTunes could not connect to this iPhone because an unknown error occurred (0xE8000001)
    Alternatively, the error may be the same as above but end with a different number. See:
    http://support.apple.com/kb/TS3221
    (thanks to B Noir for the tip)
    Hope this helps.

  • HP laptop D1E80UA is doing nothing but showing HP and running help me plz

    It's my sisters laptop all I can get it to do is HP and the little wheel is running and it won't do anything else

    @Coffeecup1007 ,
    Hello and thank you for posting on the HP support forums.  So that we can best help you please check out the following link.
    Advice for asking the "Very Best Question"
    As well when you post back please include your full model and product number.
    HP Notebook PCs - How Do I Find My Model Number or Product Number?
    I hope to hear back from you soon
    Thank you again for posting and have a great day.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

  • Problem with IPad , did an update as requested now it does nothing, but display a graphic that shows I should connect to ITunes . So I connect it to my IMac run ITunes nothing happens. Try restore pop up says not eligible for restore.

    Wow what a pile of crap you must wade through to ask a question .
    Ok so the problem is I did an update on my IPad and now it does nothing but show a graphic showing the power cable connecting to ITunes
    So  I connect iPad to my IMac and prompt iTunes nothing happens. So I try sinc nothing happens.
    So I try restore and the popup says I am not eligible for restore.
    What is going on with this stupid machine

    Machines are incapable of being stupid. Not so of their operators.
    Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • My 5th ten iPod is basically doing nothing but trying over and over again to start up. I've tried to restore it, but when the logo apple appears, it simply shut down.

    my 5th ten iPod is basically doing nothing but trying over and over again to start up. I've tried to restore it, but when the logo apple appears, it simply shut down. Then I've connected it to my macbook pro, and I've seen the script "Please Wait - Very Low Battery", but, after some time, the iPod tries to start up again, and nothing happens. It's a kind of noise, I'm thinking about the hard disk, (it's a 80Gb version), and I'm listening to it; every 30 seconds seems to try to open and then shut down again. I can't see the iPod in iTunes too. Don't know what to do. Can someone help me? Thanks a lot, it's my first forum

    It sounds like the battery could be going bad as well as the iPod's Hard drive.  You'll want to have the iPod serviced either by Apple or a third party repair company. Here is Apple's pricing:
    http://www.apple.com/support/ipod/service/prices/
    Google for "iPod repair" and you should get a ton of results to work with.
    B-rock

  • I bought a brand new 5th gen ipod touch. im trying to restore from itunes backup. then it says connect to itunes but my hp laptop is not syncing it. when i plug it in it does nothing but say connect to itunes... how do i fix this?

    i bought a brand new 5th gen ipod touch. im trying to restore from itunes backup. then it says connect to itunes but my hp laptop is not syncing it. when i plug it in it does nothing but say connect to itunes... how do i fix this?

    Hey jtom234412,
    Thanks for the question. Based on the information you have provided, it sounds like your device is not detected in iTunes for Windows. The following resource may help resolve this issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Furthermore, if your device is in recovery mode (displaying an iTunes symbol, with a plug), see the relevant information under Step 5.
    Thanks,
    Matt M.

  • I have and ipod touch 4g, it stop working out of nothing, tried everything..

    i have and ipod touch 4g, it stop working out of nothing, i tried to restore, i plugged in to another computer and to the outlet wall and nothing, didnt drop it or got wet, someone told me that it happens sometimes with this ipod generation. what can i do? i bought it to years ago.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!!  SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.

    The issue:  Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!! 
    SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.
    The cause:  It is now clear what caused this problem.  For years I had several “all-day” events in my Outlook calendar (birthdays, anniversaries, etc.).  In May 2012 I decided to make some of them one hour  events so I could add alerts to remind me of the event.  I did this by dragging them in Outlook to the time I wanted and expanding them to the time slot desired and then adding the alarm.
    The symptom:  Syncing stopped working for the calendar but continued working for contacts and notes.  I didn’t realize sync was failing until months later when I missed two very important phone calls, so when I noticed it the cause was not obvious. 
    The failed attempts:  I’m head of a software firm and my calendar sync is a crucial to my business life so I took this on with a vengeance.  From a quick look at events in Outlook and the iPhone I could see that the problem started in May 2012.  Events before May were in both Outlook and the iPhone but events after May were only one or the other.  Unfortunately I had changed several other things at the same time relating to other events so again the cause was not obvious.  MANY calls with AppleCare proved them incompetent so my internal IT guys assisted trying many things.  We tried a huge number of calendar changes and several versions of iTunes, iPhone OS and Office as well as both iPhone 4 and 5, all without success.
    The fix:  After 18 months of frustration, MANY  hundreds of $ expense and MANY hours of wasted time I saw a blog that had a calendar sync  problem and it indicated all day events were related.  I changed the display of the Outlook calendar to the list view, added columns so I could see “all day” event check marks as well as times of events,  sorted on the “all day” event column to move them to the top, and for all events that were “all day” events AND had a start and end time, I removed recurrence and then added the annual recurrence back…
    After I fixed all events that had BOTH “all day” set and had a start/end time, I tried another sync.  It synced for the first time in 18 months! 
    Problem occurred May 2012 – fixed Nov 2013

    Hi, to remove dummy '_ModGrp' entries, rather than crashing the 'Suppr' key on your keyboard, you can use this basic VBA macro (launched for instance from Excel).
    It will recursively remove all '_ModGrp...' folders
    Sub RemoveFolders_Click()
        Dim oOutlook As Outlook.Application
        Set oOutlook = New Outlook.Application
        Set objNameSpace = oOutlook.GetNamespace("MAPI")
        Call CleanFolders(objNameSpace.Folders)
    End Sub
    Sub CleanFolders(objFolders As Outlook.Folders)
        For i = objFolders.Count To 1 Step -1
            If Left(objFolders(i).Name, 7) = "_ModGrp" Then
                objFolders.Remove( i )
            Else
                If Not objFolders(i).Folders Is Nothing Then
                    Call CleanFolders(objFolders(i).Folders)
                End If
            End If
        Next i
    End Sub

  • I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

    I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

    Hi there Fgonzalez2015,
    You may find the camera troubleshooting steps in the article below helpful.
    Get help with the camera on your iPhone, iPad, or iPod touch
    You see a closed lens or black screen
    If you see a closed lens or black screen when you open the Camera app, try these steps:
    Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
    Force the app to close, then open the Camera app again.
    Restart your device, then open the Camera app again.
    If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
    -Griff W.  

  • Why my iphoto stop working kept downloading nothing happening

    why my iphoto stop working kept downloading nothing happening

    Because it's broken?
    Before anyone can help, they need information to work with. Basic stuff:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. What were you doing when the problem arose?
    - Did it ever work properly?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    Anything else you can think of that might allow someone else to understand your issue.
    With this kind of information somebody can develop a starting point for troubleshooting the issue.
    Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. With information, s/he may be able to get your issue resolved sooner.

  • 3000 K100 does nothing but beep

    Model #: 57068347
    OS: Windows Vista
    I went to bed and the computer was working. I wake up the following morning, the screen is blank, and the machine is doing nothing but beeping. I tried cycling the power and still nothing. No POST screen, no response from the keyboard, nothing. Just repeated beeps from the speaker and that's it.
    I cruised through the support forums a bit and didn't find much that was useful. Anyone got any ideas?
    thanks!

    epicdave,
    What can you tell us about the beeping?  Generally with PCs, there will be a series of long and short beeps in some kind of repeating pattern which can indicate what component is causing the trouble.
    Can you discern the number of beeps before the pattern repeats?
    Failing that, or more generically I would suspect memory, system board, power supply.   I'm going to suggest that if you are still in warranty that you contact service.   If you are outside of warranty, I'll offer the following things I might try...
    1) Memory - remove and reseat the memory.  While you have each module out, check the condition of the little gold contacts.  If they look dull or have dull spots where the contact is made (you will see the slight rub marks where the socket engages each tiny contact pad on the module)  you can gently use a pencil eraser to clean the contacts on the memory - just rub the eraser back and forth a couple times gently and then wipe away any of the eraser material.  Re-insert in the sockets and try to power on the PC again.   
    2) System board - could be any number of componenet failures which would require a board replacement.  Depending on the BIOS, the beep codes can sometimes identify which component to confirm the diagnosis.  Try removing any expansion cards and power up again.  
    3) Power supply - less likely as it sounds like it is working to some level since the system is beeping. 
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Firefox has stopped working in Windows 7 but works in Windows safe mode

    I am sending this from a different computer on which Firefox works fine. My problem is on a Windows 7 PC -- in the past few days Firefox has stopped working in normal mode but works ok in Windows safe mode. I keep getting a Windows error message that it has stopped working and I will be notified if there is a solution. Of course, I am never notified. I have tried resetting Firefox when in Windows safe mode, as well as uninstalling and reinstalling Firefox, after having deleted all the program folders and appdate. I've exhausted every possible fix I could find in the Mozilla support forums but I still can's solve the problem. Can you help please?

    *3
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
    * [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • Maybe its just me but verizon had my rebate for a month and some change and  still haven gotten it i got this contract on july 10, and my samsunsung galaxy s4 does nothing but shut off on me constatntly and they wont even help..any suggestions because im

    maybe its just me but verizon had my rebate for a month and some change and  still haven gotten it i got this contract on july 10, and my samsunsung galaxy s4 does nothing but shut off on me constatntly and they wont even help..any suggestions because im looking into a lawsuit now so aggravating..my phone is def on a blank sceen right now

    JCLouis, 
    We saw your story and are very worried about what we read! This isn't like us at all and we are here to help sort it all out. We recommend calling the Rebate Center to check on the status. Their number is 1-800-457-0864.
    We can help you right here with your phone! How often does it turn off? Is it just that the screen goes black or does it completely power down? Also, does it start back up by itself if it does power down?
    SarahO_VZW
    Follow us on Twitter @VZWSupport

Maybe you are looking for

  • Iphone 3, sync'd with Exchange, sent mail goes to draft folder

    Sent Mail (Exchange Account), is going to the drafts folder

  • How to link a full text index with catalog in a PDF file ?

    Good morning and thank you for your help. I already create some PDF files on a folder (with hypertext links between us) and I use the command "Tools\Document processing\Full Text Index with Catalog" to create an index; at this time everything works p

  • Video Playback Size

    I am putting video into presenter slides, the playback default size is rather small. Can the screen viewing area be altered to fill the entire screen? If so how? Thanks in advance. Becky in Sydney.

  • Action Required: Your AOL Username login must transition to Apple ID

    I have had this email a couple of times in the last few days... the other day I created my Apple ID for my daughters IPhone and there was nothing about this popping up despite downloading the latest iTunes on my other laptop. Here is the EMail - Is i

  • ****Implementing Enumeration Interface****

    I need to implement the enumeration interface in a class which represents a day of the week. I need to be able to call the nextElement method to return the next day in the week. For example, if the current day object is Saturday, the nextElement meth