HT201263 itunes does not recognize my iphone after update

First I had Trouble installing the latest Itunes Update, then I had to delete Itunes from my computer and re-install it. Now, it doesn't recognize my Iphone and I can't sync. What do I do now?  Yes, I have an older Iphone (3GS) but, what the ****!
Any Ideas, Anyone?
Thanks
FurrfaceOK

Hello FurrfaceOK,
The following article provides troubleshooting that can help get iTunes to see your iPhone.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen

Similar Messages

  • ITunes does not recognize my Iphone after I tried to unlock it

    I tried to unlock my iPhone with redsnow but smth went wrong and now it sais conect to iTunes, but iTunes does not recognize it. iPhone is stuck in conect to iTunes picture.

    Under the Terms of Use of this forum it is prohibited to discuss jail breaking. By jail breaking your iPhone you void any warranty you may have, forfeit any support from this forum, leave your iPhone vulnerable to malware and risk bricking your iPhone should you attempt future software updates or restoring your iPhone - http://support.apple.com/kb/HT3743.

  • ITunes does not recognize my Nano after update to 7.6.0.29

    I recently updated my iTunes software to version 7.6.0.29 and my Nano 3rd generation is not recognized anymore. Once it is plugged into the computer, Windows locates it and opens up the Windows Explorer. iTunes does not find the Nano at all.

    I have a similar problem with the iPhone. Tried everything you can think of and then some. There is apparently some devastating bug 7.6 introduced into normal USB device recognition. I've been able to force the phone into recovery mode; the boot recovery USB driver does still work. Restoring the phone every time I need to sync is both scary and time-consuming.

  • When i plug in my iphone to the system, itunes does not recognize my iphone. i have tried all the troubleshooting part n there are no results yet. what should i do?

    when i plug in my iphone to the system, itunes does not recognize my iphone. i have tried all the troubleshooting part n there are no results yet. what should i do?

    I have reset my iphone and made sure all updates have been done on my macbook pro and iphone. It was after updating my macpro that I plugged in my phone and went to itunes to backup phone and can't see the device anywhere! I have also done all the troubleshooting that apple.com recommended too...all except re-installing itunes!

  • My iTunes will not recognize my iPhone after iTunes was updated.

    my iTunes will not recognize my iPhone after iTunes was updated. what does that mean?
    <Re-Titled By Host>

    Hello mzshay2u2,
    Thanks for using Apple Support Communities.
    From your post I understand that you're unable to locate your iPhone within iTunes 12 on your Mac.  First, I'd like you to take a look at the screenshot below, as iTunes 12 changed the navigation of your Library.
    Sync your iPhone, iPad and iPod with iTunes using USB
    If you do not see your iPhone's icon there, then continue on to the link below.
    iOS: Device not recognized in iTunes for OS X
    Cheers,
    Alex H.

  • HT204302 my itunes does not recognize my iphone when plugged into computer it recognizes my iphone as still camera

    Help
    Itunes does not recognize my iphone when plugged into computer it recognizes it as a still camera. I have installed the lastest version of itunes and gone through the troubleshooting tips and still have the same problems.

    Hold Sleep Button with Home Button toghether until it restarts Always it takes 8 to 15 seconds, after it restarts leave the sleep button and remember do not leave the home button it automaticlly switches to DFU mode.

  • Itunes does not recognize my iphone 4.  I am running Windows XP with IE.  Any suggestions would help.  Thanks.

    Itunes does not recognize my Iphone 4. I did a restore on my phone about four months ago..  Does anyone have any suggestions as to what I can try?

    try deleting these preference files
    •C:\Documents and Settings\Your Username Here\Application Data\Apple Computer\iTunes
    •C:\Documents and Settings\Your Username Here\Local Settings\Application Data\Apple Computer\iTunes
    •C:\Documents and Settings\All Users\Application Data\Apple Computer\iTunes\SC Info

  • ITune Does not recognize my iPhone (Europe 4G-4S)

    iTune Does not recognize my iPhone (Europe 4G-4S). The iOS (ver 4.xx)on the phone does not have the "update the software now" option. WinXp identifies it as "Europe 4G-4S Android Phone and Keeps asking for the following file/driver: ST65xx which I can not find.
    Thanks for your help!

    A google search for "Europe 4G-4S Android Phone" turns up device drivers as FelipeV noted, as well as this product page (in Italian) http://lucazatti.blogspot.com/2013/01/android-40-smartphone-4g-4s-cellulari_11.h tml
    These fakes used to be pretty common and some were actually almost indistinguishable from the real thing until you tried to use them with iTunes...
    http://lucazatti.blogspot.com/2013/01/android-40-smartphone-4g-4s-cellulari_11.h tml

  • Itunes does not recognize my iphone as a device when it is plugged in.  I've tried the online troubleshooting steps ...

    Itunes does not recognize my iphone 4 when I plug it in. It is not listed in devices. I've tried the troubleshooting steps I found online ...

    I would start at the top of the following, but don't miss the "Windows only: Check for the camera drives and Media Feature Pack" section" iOS: Unable to import photos to computer

  • TS3219 My iTunes does not recognize my iPhone; no sync info on left side of my itunescreen

    iTunes does not recognize my iPhone in windows 7. The sync info no longer populates on the left. When I plug iPhone, iTunes does not lunch, instead I get an 'autoplay' box

    Hi karwilson,
    Thanks for using Apple Support Communities.  If iTunes doesn't recognize your iPhone, this article may help:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If issues persist, a thorough removal and reinstall of iTunes would be the next thing to try:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Cheers,
    - Ari

  • HT1923 itunes does not recognize my iPhone 5 when I connect to iTunes

    iTunes does not recognize my iPhone 5 when I connect to iTunes

    Hello mprwinded,
    It sounds like your iPhone is not appearing in iTunes.  I recommend following the steps in this article to troubleshoot the issue you described:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Itunes does not recognize my device after ios8 update

    Why does iTunes does not recognize my device after iOS8 update and what can I do to resolve this.
    I am getting a "plug-into-Itunes-logo" screen on my iPad. Thx!

    Hi there janis831,
    It sounds like your device may be stuck in Recovery Mode. Take a look at the article below for how to restore your device.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    -Griff W.

  • Itunes does not recognize my iphone 4 device

    I bought a new computer, tried to install itunes, after three different people tried to help me, i finally got itunes to install, but when I plug my iphone into my computer, itunes does not recognize the device.  I am trying to 1. upgrade my iphone soft ware to 10.5.3, utilize icloud, and perform basic functions of syncing my phone with my computer. Any help, anyone could provide would be appreciated.
    Tank you,
    Rose

    If your iTunes is the latest version, restart your computer and reboot your iPhone. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPhone restart. See if that fixes your problem.

  • Itunes does not recognize IPAD 3 after upgrading to IOS 6.

    After updating my IPAD 3 to IOS 6, Itunes does not recognize my IPAD 3.  What can I do to fix this issue?

    I have a similar problem with the iPhone. Tried everything you can think of and then some. There is apparently some devastating bug 7.6 introduced into normal USB device recognition. I've been able to force the phone into recovery mode; the boot recovery USB driver does still work. Restoring the phone every time I need to sync is both scary and time-consuming.

  • My iTunes does not recognize my iPhone 4...plz help..!!

    Hello Folks,
    My iTunes (version 10.5.1.42) does not recognize my iPhone 4. I have tried all the below steps but nothing seems to work.
    iTunes un-installed and installed again.
    iPhone restarted
    Virus protection disabled
    Tried diffirent USB connection on my laptop
    The same iPhone seems to be working prefectly fine on my friend's laptop. Please help..!!!

    iOS: Device not recognized in iTunes for Windows
    iOS: Device not recognized in iTunes for Mac OS X

Maybe you are looking for

  • Beginner User:  Locking (making read only after data entry) a single field after selecting date

    Hello, I am a beginner user trying to create a form using Adobe Livecycle.  One of the fields I would like to make read only/protect it/password protect it after a user selects the date.   For example, I select August 17, 2010 as the date. After I se

  • HELP: Error while insert in master-detail form!!!

    Hello I have created a master-detail form and when I tried to insert a new record I got an error that the field on the detail table that references the primary key on the master table can not be null. I don't understand this error because I thought t

  • Not allowing a number as the first char in the username

    Is there a particular reason why I am not allowed to create a username with a number as the first character? Or is this something that can be changed? If so, how can I go about changing it? I have edited the UsermgmtTools.properties to say: "disallow

  • Assign function code to a field in internal table

    Hi all, Can we assign a function code to one field in internal table so that we can use it as an user command in list display. For ex: data : begin of itab occurs 0,           check(1) type C,           num type I,          end of itab. I am preparin

  • Can I update Power Map add-in to May 2014 version ?

    Can I update Power Map add-in to May 2014 version ? I want to use May 2014 version's Power Map. I'm Office 365 subscriber, and Office 365 ProPlus. My Power Map version seems to 12 Apr 2014. Regards, Yoshihiro Kawabata