HT201263 My apple Ipad2 display blank after I update it to ios 7!!!

My apple Ipad2 display blank after I update it to ios 7, but i still can hear the aplication and all sound from the ipad. How can i fix this... even i already do the restore process but the screen still blank and only sound from it remain like normal.

I read another thread where people gently tapped the back of the iPad against their knee and it came back on. Someone else reported that dropping on to a carpeted surface from a lowish height corrected it. Others have said that twisting it gently has brought the screen back. You will have to try these at your own risk and be very, very careful.

Similar Messages

  • HT1600 Do I have to connect my apple tv to itunes after an update?

    Do I have to connect my apple tv to itunes after an update?

    No. That would only be required if there is an interruption  during the update, which would then mean it needs to be restored.

  • My apple tv is not accepting my apple ID for itunes after an update

    Apple tv is not taking my apple ID for itunes, after i updated the apple TV it stopped logging me into itunes, what should i do...?

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
        1.    Restart the Apple TV (Settings > General > Restart).
        2.    Restart the Apple TV by removing ALL the cables for 30 seconds.
        3.    Restart your router.
        4.    Reset the Apple TV (Settings > General > Reset > Reset all settings)
        5.    Restore the Apple TV (Settings > General > Reset > Restore)

  • HT4623 why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    You are in Recovery Mode. Follow the instructions below to recover your iPad.
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • I would like to inform you that  i have received today an email from Apple adrees (Warning your account has been limited), Apple in this email requesting me to update my Apple ID information. After i updated that as well and follw up with instructions the

    i would like to inform you that
    i have received today an email from Apple adrees (Warning your account has been limited), Apple in this email requesting me to update my Apple ID information. After i updated that as well and follw up with instructions the massage bellwo was appeared to me(Apple ID doesnot have permission to access iTunes connect)
    I appreciate if you kindly explain this and tell me please if i do something wrong.
    You feedback is high appreciate.

    You have been scammed. Most likely your iTunes account will be hacked. Contact Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Apple - Support - Contact Apple Support.
    For Mac App Store: Apple - Support - Mac App Store.
    For iTunes: Apple - Support - iTunes.
    BTW. The forums are user forums. You aren't speaking to Apple here.

  • I understand that your iPhone 5 is not recognized by iTunes 11.2 on Windows 8 pc after you updated your device iOS to iOS 7.1.1.

    iPhone 5 is not recognized by iTunes 11.2 on  Windows 8 pc after you updated your device iOS to iOS 7.1.1.

    Hi calltimecasting,
    Welcome to the Apple Support Communities! If your iPhone is not recognized by iTunes on Windows 8, I suggest the steps in the following article to get this resolved.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    I hope this helps,  
    -Joe

  • Iphone 4s says: "Replacement needed" after i update to latest ios

    my iphone says: Replacement needed after i update to latest ios...is the apple change the my iphone for free or they repair this?thanks anyone knows about this problem?

    Yes, I tried. But nothing is working. I am feeling bad as such a costly phone stop working in 1.4 year ?
    I am just sharing my experience.
    I am not ranting but yes angry as I am eligible for upgrade in Nov 2012 so don't want to pay $149 for replacement as I can upgrade to iPhone 5.
    Apple expert please help me how can I fix it. It's completely software issue.

  • Im from Philippines and my iphone is from Japan after I updated it to iOs 6.1.3 it wont activate it says ''Activation Error Please Contact Customer Care'' what does it mean? How can I activate it? Please help me.

    Im from Philippines and my iphone is from Japan after I updated it to iOs 6.1.3 it wont activate it says ''Activation Error Please Contact Customer Care'' what does it mean? How can I activate it? Please help me.

    You can NOT unlock it. Only the carrier it is locked to can legally authorize unlocking it and the Japanese carriers will not do so.
    In order to be using it previously with a non Japanese carrier, the phone had to be hacked to illegally unlock it.  You can not get help here.
    Buy a new phone you can use.

  • HT1689 my ipad 2 doesnt work that well. it always hang by it self after i updated the latest ios 7.

    my ipad 2 doesnt work that well. it always hang by it self after i updated the latest ios 7.

    you should backup and restore via itunes

  • Mac Mini wont' Display Sleep after Yosemite Update

    My Mac Mini is no longer going into Display Sleep. Instead I now see the Screen Saver.  I have checked System Preferences | Energy Saver and it is definitely set to Display Sleep after 10 minutes (The default). What is interesting is that if I try to change the Display Sleep time (e.g. to 1 hour), when I go back into Energy Saver, it is back to 10 minutes - this doesn't look right!  In fact none of the options (e.g. Wake on LAN) seem to stay changed.
    This seemed to start after the update to Yosemite 10.10.1 a few days ago - but that might be coincidental. Until then Display Sleep had worked fine.
    Any suggestions?
    Thanks
    Nick

    This procedure is a diagnostic test. It makes no changes to your data.
    Please triple-click anywhere in the line below on this page to select it:
    defaults read /Library/Preferences/SystemConfiguration/com.apple.PowerManagement | pbcopy
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    Wait for a new line ending in a dollar sign ($) to appear below what you entered.
    The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
    The Terminal window doesn't show the output. Please don't copy anything from there.

  • Camera on ipad2 not working after ios7 update?

    Camera not working on ipad2 after ios7 update?

    AApple takes no responsibility for their updates causing harm to devices. See section 7.4 through 7.6
    i see a lot of denial on this site when it comes to viruses, the same applies to apple updates messing up folks devices. Take it back to an apple store and it is likely the best you can hope for is a discount on a new ipad.  Good luck.  Hopefully someone here can help you with a fix.
    http://images.apple.com/legal/sla/docs/iOS81.pdf

  • App store goes blank after io6 update on 4s

    app stores goes blank white after io6 update on 4s

    it could be that youll have to delete and reeneter your email onto it.
    go to settings>mail,contacts,calanders>tap on your email.
    scroll all the way down. tap the big red delete button.
    go back into mail contacts and calanders and tap on add account and re add it.

  • Does the Apple Radio Remote work after the update?

    Anyone try it after the update? I know it didn't work before...
    And a side question, since there doesn't seem to be anywhere to ask...are the support forums (especially logging in) constantly crashing Safari (Mac version, desktop) for you?

    The Apple Radio Remote I am assuming you mean the one linked below
    http://www.apple.com/ipod/accessories.html
    It would be the accessory attached to a ipod.
    IF this is the accessory your referring too. Then please note that the compatible devices that it works with is only ipods and not the iphone. Check the link below for yourself.
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=B9E C42BD&nplm=MA070G/C
    If you wish to have this accessory available for the iphone then leave feedback below
    http://www.apple.com/feedback/iphone.html
    And no logging into the forums is quirky but it does not affect my safari especially not crashing.
    GFF

  • Apple tv not working after latest update

    apple tv not working after installing latest update.

    I have the latest update of the Remote app on my iPhonne but still no AppleTV icon visible.
    how can I do a roll back on my Apple TV?

  • Apple tv not working after new update

    Installed Apple TV update today and after the update was completed it showed the picture of hooking the lighting cable to iTunes.  How can this be done on Apple TV?

    Welcome to the Apple Community.
    You can do this on a friends computer, that has iTunes installed.
        1.    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
        2.    Connect the micro USB cable to the Apple TV and to your computer.
        3.    Reconnect the power cable (only for Apple TV 3)
        4.    Open iTunes.
        5.    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

Maybe you are looking for

  • The text which is in text node is not displaying in output in smartforms

    Hi,   In smartforms i created a text node and entered some text like following.      Target Quantity               60000001     60000002                Scheduled Quantity               60000003     60000004                     So far delivered Quanti

  • Error in installing database

    hai i am installing sap netweaver 2004s with a IBM DB2 as database.I got an error in Create database phase. INFO 2011-11-28 02:22:06 Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DB6/CENTRAL/AS/createDatabase.clp' to 'C:/Program Files/sa

  • Multiple column in LOV

    Dear community, I have been struggling with the issue that Apex wont allow me to display more than 1 value/column in a LOV/select-list. Is there a fix or workaround for that? I have been searching all over the internet, landed on a webpage with jQuer

  • How  and where does SAP standard programs update the master tables...

    Hello there, How  and where does SAP standard programs update the master tables... to be precise.. if a (any) transaction occurs  the programs behind it holds the data in temporary structures. where and when does it get updated in the master table. c

  • Download and extract jar file from applet

    Can any one provide me a solution for my below problem. Thanks in advance for all the suggestions. I want my applet to download a jar file, extract into users home directory by creating a folder and then set the created folder to java library path. M