HT201263 My iPhone 3G 16gb in white: I did all the things you mentioned, but it just keep looping the Apple logo and doesn't turn off until it is out of battery, and I am using a MacBook Pro 15inch Unibody if that does matter
My iPhone 3G 16gb in white: I did all the things you mentioned, but it just keep looping the Apple logo and doesn't turn off until it is out of battery, and I am using a MacBook Pro 15inch Unibody if that does matter
If you are in Hong Kong, go to Digital Trade, 1/F, Sincere Plaza, Argyle Street, and it will cost you 120-150HKD, but before you go check that your power button and home button are working correctly, if not press as hard as you can, hope this will help.
Similar Messages
-
my iphone 4 regularly gets stuck on the apple logo screen and stays there until it runs out of battery, and even during charging. what can i do? I have restored it, still it gets stuck on apple logo, anyone pls help.
Jai141 wrote:
... and im not sure as i brought the phone of someone else.. i will have to ask them
Good Luck.
Jai141 wrote:
Thanks
You're Welcome. -
I just got my battery and iphone 4 screen fixed and when it turned off because there weren't any battery left, I tried charging it. After charging it for like thirty minutes, I pressed the home & lock button and it turned on for a moment for me to see that it was only at 1%... So basically it wasn't charging for that entire half hour. Then, I tried connecting it to my computer and nothing is popping up... so it won't turn on or charge... what do i do?
Who repaired the phone? I suggest taking it back to this repair facility. Since Apple replaces phones instead of repair, the repair facility would be the one to take care of your problem.
-
i-phone3 wont recharge; initially home button wouldn't work. Applied the 'auto-touch button thing' via settings. This worked until I ran out of battery life. Now it won’t recharge either via laptop (usually does) or wall switch. Just a blk screen.
In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt -
My iPod 2G doesn't turn on. It is out of battery, but when I connect it to my charger it just continues to show the apple logo. It did that for 3hours straight. Please HELP!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Does anyone ever get a human being when calling prepaid support at 888-294-6804? It tells me call volumes are higher then normal and I can stay on the line, but it just keeps repeating the menu options and eventually hangs up on me. That is really irritating!! I'd at least like the option to wait on hold. I guess I should have listened to the warnings about prepaid support before switching to prepaid last week.
The reason I'm calling support is I'd like to know when I will be getting the extra 500MB of data when signing up for auto pay. This is one of the reasons I switched to a 4G Allset plan. I signed up for auto pay promptly after setting up my online account when I switched from post paid to pre paid on Thursday July 17, 2014.I'm sorry you are having trouble reaching a representative, mhaider60. When calling our Prepaid department you can reach a representative using the following number and prompts: 888-294-6804 when prompted, select 4, 6, and 4 to reach a representative.
AndreaS_VZW
Follow us on Twitter @VZWSupport -
My ipod touch 5th generation went into recovery mode when I tried to update ios. When I try to recover it just keeps looping back to recovery mode. I tried to hold the power button for 3 secs. then simultaneously hold the home button for 10 secs. then hold only power button for 20 secs. I tried this several times to no avail. This is my daughter's ipod. I am computer illiterate and I'm not sure what else to try.
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My ipod touch just turned off on me, the screen just turned off and now it wont turn on whatever i do. I tryed plugging it in to charge and pressing down on the hold button and home button but its not doing anything, How do i fix it? Not sure what my operating system is but i know i havent updated to the newest version.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have upgraded itunes on m computer to 10.5. When I connected my iphone to the computer I was told that ios 5 is ready to be downloaded, and that I should back up my iphone before doing the download. I did. Now I want to get my iphone back on and it just can't . The screen lights up, i select language and network but it tells me that my phone cannot be activated because the activation service is temporarily unavailable. what do i do?
Try a Hard Reset.....
Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds. Ignore the swipe to turn off message. -
My phone shows the apple logo and doesn't turn off or on. this occured after connecting to itunes
connected to itunes...phone no longer works...displays apple. how do i get my phone working again
Try resetting your iPhone. Press and hold the sleep/wake button and the home button for 10-15 seconds until the Apple logo appears, ignore the red slider. Then turn back on. You will not lose any data by doing this.
-
please help!
If the Home button is broken, best thing to do is take it in for repair, or get an estimate. Make a Genius appointment.
Apple - Support - Search -
Earlier today, I was bookmarking things and everything was working perfectly fine. I got back on firefox later, and i noticed all my bookmarks were gone. I tried bookmarking other pages and it didnt work! I WANT MY BOOKMARKS BACK AND I WANT TO BE ABLE TO BOOKMARK AGAIN! Your "helping" pages are no freaking help!!
What have you tried?
Have you gone through all the options in the [[lost bookmarks]] article? It is possible that the file that stores bookmarks is damaged, see [http://kb.mozillazine.org/Locked_or_damaged_places.sqlite Locked or damaged places.sqlite - MozillaZine Knowledge Base] -
If we close Firefox. It appears to be done, but if I go to open it again it will say it is still running and we need to close it. I have to Ctrl Alt Delete and go to the processes tab to end it
See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]] -
its been a couple days now since my macbooks been playing up someone please help me. ive got firefox, google chrome etc none of them are loading facebook every other websites works fine, facebook takes 5 minutes to load and it goes to a mobile website without loading anyone know why? im using a macbook pro 2011 with ios 10.6.8
Make sure your Java and Flash are up to date from http://www.java.com/ and http://www.adobe.com/
Clear your cookies for Facebook as long as you remember the password for it.
Try a different web browser * if none of the above work. -
My macbook doesn't turn off and filesystem verify or repair failed
My macbook doesn't turn off unless I take out the battery, which I did not do at this time. Used disk utility and it came up with Error: filesystem verify or repair failed. Missing thread record id=2099508. Incorrect number of thread records. Invalid file count. Should be 1042169 instead of 1042170. The volume needs to be repaired - 7%. Okay, shall I take out the battery, then put it back in, and on startup press D and do a hardware test? Or what? Thank you. Ellen
These are the MacBook's specs:
Processor Name:
Intel Core 2 Duo
Processor Speed:
2.4 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache:
3 MB
Memory:
2 GB
Bus Speed:
800 MHzSorry I didn't reply sooner. I had work to do on my computer, and I didn't want to rsk messing around with it until I finished. So, I removed the battery in order to turn off the computer, then restarted it , holding down the D key at the same time. The computer started up, but no screen came up to continue. So I again removed the battery, though I did first try shutting it down the correct way, and aain restarted with holding the D key down. Nothing happed no hardware test. So, everything is backed up now, and is my next step to insert my Mac OS X install disc 1, or do I earase everything and install it,? And am I supposed to install the disc while holding down the C key?
Thank you.
Ellen
Maybe you are looking for
-
Is there anyone with a 1st generation IPad and IOS 5.1 that's NOT having tons of problems?
The whole world is always in such a big hurry to buy the next generation of anything - seems this has caused Apple to just not bother with their early customers. So many updates to so many apps to work with all the new stuff - not much works at all f
-
Various errors, incorrect version of track (from iCloud restore) from an iTunes album
Sorry for being a bit vague describing the problems but they are too complicated to summarize in 1 sentence. I bought a number of albums from iTunes last December, including LeAnn Rimes "I Need You". I have a car that allows me to play iTunes music
-
New Officejet Pro 6830 will not print via USB connection. It scans great to PC. It copies.
New HP Officejet Pro 6830 for user to have local USB printer/scanner at desk. User runs win 7 64 bit on a network. Raninstall through setup.exe. Followed steps, connected printer via USB when it said to and it detected it and finished install.You
-
New fields update with CRM_ORDER_SAVE BAdI - not working
Dear Experts, I ask your help in connection updating custom generated fields in Opportunity. In the Webclient UI i added a new field to Opportunity - Total Expected Value, and a Currency for it automatically generated. The enhancement ID is YEXT00001
-
I can't install updates to apps installed via a CD
My iMovie and iPhoto was originally installed via a CD, and for the last few months I keep getting requests to install updated versions. But the installation never works because the originals didn't come from the App Store, yet there's no way to refu