HT201263 [NAND] Find Flash Media And Keepout Error

[NAND ] _FindFlashMediaAndKeepout :601 physical nand block offset 1
[NAND ] start :356 this 0x9f538400 PROVIDER=0x9f6b1f00 flashMedia=0x9f6b1f00
[NAND ] WMR_Start : 149 Apple PPN NAND Driver , Read/Write
[NAND ] WMR_Start : 174 FIL_Init [OK]
[NAND ] WMR_Open : 371 VFL_Open   [OK]
[NAND ] s_cxt_boot : 88 sftl : error , unclean shutdown; adopted 11280 spans
[NAND ] WMR_Open : 420 FTL_Open   [OK]
[NAND ] _publishServices : 642 FTL capabilities : 0x00000001
[NAND ] _ppnvflGetStruct : 3469 Checking borrowed blocks - count : 23 max_count : 23
[NAND ] _fetchBorrowedList : 881 number of borrowed blocks 16
Above is the error that I started receiving this morning. The phone wasn't plugged into anything and appeared to have turned off due to a low battery. The phone was unresponsive when I hit the lock screen button or home button. When I plugged it into a wall outlet with the original USB cord and wall adapter, it initially showed that it had a low battery. After a few minutes once it had enough power to start, the Apple logo displayed normally for a few seconds and then the screen went dim and displayed the above error.
I then pushed and help the lock screen button and home button together until it turned off to hard reset it. I held the home button and plugged it into my Mac Mini so that it would go into recovery mode.
When iTunes finally gives up, it will throw an unexpected error of either 4005 or 4013
I've seen similar discussions such as:
iPhone 4S Stuck at boot showing [NAND] ?                                                 https://discussions.apple.com/thread/4109291?start=0&tstart=0
Well I was using my iphone 5, When ..... i get the same error ,                    https://discussions.apple.com/message/23051809#23051809
My iphone 5 wont move ..... offset 1 Someone PLEASE HELP ME!              https://discussions.apple.com/message/21809003#21809003
and several others but none of which have been helpful. I've seen some actual Apple employees post on the discussions but nothing useful; the typical have you read the troubleshooting steps, here's some links to error messages, etc...that don't explain what this issue is and what I can do to resolve it.
Any help would be much appreciated.
Mr-apple

https://discussions.apple.com/message/26136922#26136922

Similar Messages

My iphone 5 has gone to a screen with apple logo and message saying find flash media and keep out. I cannot do anything with my phone. can soomeone help.

my iphone 5 only has apple logo on screen with message saying find flash media and keep out. What does this mean, i cannot do anything with the phone

thanks

Flash media and keepout 600 physical nand black offset 1

My screen is frozen and this is the message at the top of the screen. Help~please!

Any physical or liquid damage to the iPhone?
First try a reset:
- hold the home button and sleep/wake button down at the same time
- the iPhonw qill turn off(keep holding) then as soon as you see the Apple logo appear release both buttons
If the issue remains then try plugging it into a PC/Mac with iTunes and see if it will be recognised. If it is recognised then back it up and then restore to factory settings. If all steps fail then [book an appointment at an Apple Store to have the iPhone evaluated.
All the best

How can I find flash media playback setup page? Flash media playback OSMF site - missing, hijacked, bad DNS?

How can I find flash media playback setup page? Flash media playback OSMF site - missing, hijacked, bad DNS?

I'm having this issue as well. Weird how hard is to find info and solutions on Google.What do people use instead? A lot of tutorials link to this page...

Itunes: i want to find a single fix for missing music on itunes rather than using "iTunes: Finding lost media and downloads" on a case by case basis.

recently when i was creating a playlist, i realized that i was missing music from my extensive itunes (12.0.1.26) library. i found the solution "itunes: finding lost media and downloads" and used the general approach to find the music in finder and copy it to itunes. i don't want to do this every time i find i am missing music. is there an automated fix? i want apple to develop a way to automate the fix. can it be that this isn't a problem for many people?
i ask this now because i just looked for music i thought i had but can't find. maybe i am wrong about having the artist, but it has happened on another artist too. i can't trust itunes to tell me whether i have a song or not. i don't want to keep going back to finder, especially when the instructions in "itunes: finding lost media and downloads" doesn't actually reflect my system (os x 10.7.5).
i don't want to try to do a restore. i have never done a restore on my mac (previously a pc user). and, i don't know how far back to take the restore to find the old music. and then music i have added since i lost the old music wouldn't be there.
i understand that there are so many system variables that apple would need to take into consideration with a general fix. but: i am assuming that apple's changes have caused my problem and feel that apple should do something to fix it. perhaps my assumption is incorrect.
thank you for your help.

limnos, i always have backups. the problem is that i don't know how far back in time to take a restore because i don't know how long this has been going on. and, if i take the restore back very far, i will lose what has been added since the music started to disappear.
i don't even know what you mean when you say "you will check there aren't any broken links (use a script from the Dougscripts web site) before you do a backup."
i agree with you to some extent about not automatically installing upgrades. i'm still running lion and was pushed to it from snow leopard. the problem is that i have a hard time envisioning the changes described in an update to judge whether something is valuable or not.
i have questions about your last paragraph. i'm going to repeat it here and then insert my questions as i go. please forgive my all caps for the moment:
"Now for your missing music, is it that there are broken links, or are things missing completely from the library?" I DON'T KNOW ENOUGH TO ANSWER THAT QUESTION. I BELIEVE THAT THE PROBLEM HAS TO DO WITH BROKEN LINKS. WHEN I COULDN'T FIND THE MUSIC THAT I THOUGHT I HAD LOADED INTO ITUNES YEARS AGO, I FOUND THE CD'S AND IMPORTED THEM TO ITUNES. I GOT A MESSAGE ABOUT SOME OF THE TRACKS BEING DUPLICATES THAT ASKED WHETHER I WANTED TO IGNORE OR IMPORT. I CHOSE IMPORT BECAUSE ITUNES DIDN'T TELL ME WHAT WAS DUPLICATED. IT WAS ONLY AFTER RE-IMPORTING SEVERAL CD'S THAT I REALIZED THAT THERE WERE NOW DUPLICATES OF THE CD'S: THE FILES I HAD JUST LOADED AND THOSE THAT I HAD LOADED SOME TIME AGO. THE ORIGINALS MAGICALLY APPEARED AFTER I RE-IMPORTED THE CD'S. I'M GUESSING THAT THIS IS AN EXAMPLE OF A BROKEN LINK I DON'T KNOW HOW TO RECOGNIZE A BROKEN LINK OR HOW TO PREVENT ONE. AFTER I REALIZED THE PROBLEM, I FOUND THE "FINDING LOST MEDIA AND DOWNLOADS" QUIDE. I LOCATED THE MISSING MUSIC IN FINDER AND DRAGGED IT TO ITUNES. DOES THIS COUNT AS A BROKEN LINK?
"If the latter and you use iTunes default settings for managing media, you can drag your media folder to Automatically Add To iTunes. It should add anything in the folder but not in the library list but ignore things that are." CAN YOU REPHRASE THIS LAST PARAGRAPH? I DON'T KNOW WHAT "DEFAULT SETTINGS FOR MANAGING MEDIA" MEANS.
FOR "DRAG MEDIA FOLDER TO AUTOMATICALLY ADD TO ITUNES," I THINK YOU MEAN I CAN DRAG /MUSIC/ITUNES/ITUNES MEDIA/MUSIC IN FINDER TO THE ITUNES ICON IN THE DOCK. AND, THAT THAT ACTION WILL REPLACE ANYTHING MISSING IN ITUNES BUT NOT DUPLICATE THE FILES THAT ARE IN ITUNES. IS THAT RIGHT?
thank you for your time and help, limnos.

HELP! Mac G4 Finder flashes off and on, files close

My sturdy mac G4 running OSX 10.4.11 has developed a weird thing where the finder flashes off and on, the files flash off all together as if someone was resetting the finder. I ran disk warrior and utilities but still doing the same thing. Any suggestions? Never had virus. Whaats up?

Hi greenteam, and a warm welcome to the forums!
It's likely some 3rd Party APP that got broken by the recent QT or Security update.
Stuffit AVR has been a big one, if you have that use the Pref Pane to turn it off, but others have been implicated too. Check System Preferences for a Stuffit Pref Pane and disable AVR.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for action in Safe Mode...
Reboot, test again.
If it only does it in Regular Boot, then it is some 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems

Ipad 3 wi-fi - nand flash media is keepout : 688 physical nand Block..

Hi,
i Need help how to fix it?
Need your guides how to fix it, my ipad warranty is expired. according to apple repair this item cannot repair need to replace 1 to 1. since the warranty expired than i need to up the money MYR 1,300.
Please guide me what should i do?
it's logical board? its flash problem, or something else please advice.
please refer this links:http://www.ifixit.com/Answers/View/138480/The+Error+is+nand+flash+media+is+keepo ut+%3A+688+physical+nand+Block..

I'm sorry but this item is 1 year and a few months old? damage to nand is not something you'd expect from normal wear and tear and therefore not caused by you. I'd contact Apple again. Be pushy, write emails, ring them. There are people who'd be able to replace this but finding them is the problem. good luck
pollytintop, 1 hour ago
Thanks pollytintop for your advice- I’m still keeping looking forward how to fix it. Will not this item (ipad) throw become rubbish due to damaged that do not know cause and cannot repair or fix it? Hope somebody highlighted this issue to Apple (the best customer service ). Thanks

Flash media server instalation error

Unable to play video using fresh installation flash media server , showing 10000 , and 2032 error , please see the screen shot.

FMS3 is officially support on Windows 2003 server &
RHEL-4 only.

Where do I find Windows Media and Quicktime player I need them for online classes

For Angel learning I need windows Media and QuickTime player for the site to work properly. I had both add-ons in my earlier version of Firefox but they didn't carry over into Firefox 4 I'm disappointed in this version the look sucks and the pop-up blocker menu doesn't work.

Go to the following page:
[[http://windows.microsoft.com/en-US/windows/downloads/windows-media-player]]
That's the download page for WMP. Use WMP 10.

Published Flash module and 404 errors in the web server log

I’ve created a Presenter module, published it to my computer, and uploaded all the files to a web server. And it plays fine via the web.
The odd thing is a bunch of 404 errors in the web log:
10.1.2.104 - - [29/Jul/2009:10:36:00 -0700] "GET /repository/university/courses/3/flash/data/spk10821.1.jpg HTTP/1.1" 404 255 "-" 1166 419
10.1.2.104 - - [29/Jul/2009:10:36:29 -0700] "GET /repository/university/courses/3/flash/data/spk10821.1.jpg HTTP/1.1" 404 255 "-" 1166 419
10.1.2.104 - - [29/Jul/2009:10:36:57 -0700] "GET /repository/university/courses/3/flash/data/spk10821.1.jpg HTTP/1.1" 404 255 "-" 1166 419
In the data directory there is a file named spk10821.jpg that was generated by Presenter. The image is actually the presenter bio photo that would normally show up in the sidebar -- but no photo is there. The browser never requests the valid spk10821.jpg file, only the non-existent spk10821.1.jpg path.
Anybody know why this would be happening? I see in data/viewer.xml there is a tag for <image>spk10821.1.jpg</image> but I don’t know why Presenter would mention that file in the XML but generate a differently-named one in the publish folder.
I’m wondering if I should have the web server rewrite requests with the ".1.jpg" ending to get rid of the ".1" part so they will work.
By the way, this is with PowerPoint 2003 SP3 and Presenter 7.0.1.

Hi Daniel,
I am assuming that you are using Visual Studio 2010 to target the .Net framework 4.0
Crystal Reports 2008 is not compatible with VS 2010. Use [Crystal Reports for Visual Studio 2010|Crystal Reports for Visual Studio 2010 Production Release Now AvailableCystlR%2528SAPWeblogs%253ACrystal+Reports%2529] to target .Net framework 4.0.
Deploy the application using the methods specified in the 'Deployment' section of the [CR for VS 2010 .Net SDK developer guide|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_dg_2010_en.zip].
See if you can reproduce the issue after redeploying the application as mentioned above.
Few questions-
- Is it the dev machine or production machine causing the issue?
- OS version?
- What does the application do? i.e. view, export, print report?
- Issue is with some reports or all the reports.
See if there is an image on the report, remove the image and add it as a picture object ' Insert --> Picture' from the CR designer.
Hope this helps,
Bhushan.

I can't install flash cs3 AND got error my addRemovePrograms

after i downloaded flash cs3 trial yesterday . when trying to
install it, the setup aborted with no reason.
and when i open the add remove prog in control panel the
softtware name is in there. and been trying to remove it but its no
use, when i clicked the remove button i recieved errors.
i wonder why it wont install in my system, and why is it i
can see it in my add remove programs?
my system specs
80GB HD
1GB memory
AMD Sempron 3000+, MMX, 3DNow
Direct X9.0c
ECS-761GX-M mobo
Windows XP Pro SP2
software currently installed
MS OFFICE 07
MS SQL 2005
MYSQL 5.0
MS Visual Studio 2005
Is there anything i can do to uninstall this? and install the
sotware properly?
pls let me know thanks in advance.

Try using the offline installer http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player.exe

Flash content and footer errors in SOME browsers

Hi
I am designing a web site for a local tattoo artist, but am having issues with the gallery.
I am using svBuilder-Pro which is an upgrade to the bit built into PS/Bridge. The advantage is that it produces a nice slick flash gallery, but puts up something in Java script if there's no flash to be had eg iPhones etc.
It work perfectly in FireFox and Opera, but in IE, Safari and Chrome the gallery goes over the top of the fixed footer.
http://www.tattoo-bristol.co.uk/tattoo_gallery/gallery.html
If anyone can shed some light on this it would be great.
Many thanks
Ralph
Vision Design UK

Hi Nancy
I had never had any thing to do with the z-index before, and I have a much better understanding of what it does now.
In this specific application, however, I have made the z-index of the footer 500 to ensure that it is massive relative to the other divs. I have also made the div that contains the 'viewer' z-index: 1 and given it various types of position eg fixed, static, relative, but still it stays over the the footer and also the spry nav drop downs.
I have just downloaded the latest version of 'simple viewer-Pro' and re-made the gallery applying a transparent background at this seems to have sorted the issue.
I am very grateful to you for taking the trouble to help me, and have learned something new which will doubtless help me in the future.
Many thanks
Ralph

Flashing 19 and 36 error code on my motherboard led display

Hello,
When I try to restart my computer after it has been on for awhile, it wont restart. The fans remain on and the power light too. On my mobo where the led display is, has a blinking 19 and 36 along with a red flashing light. Anyone know what the issue is? I waiting 10 minutes or so to see if it needed to cool down or anything but i gave it and just held down the power.
Thanks.

HDD: Seagate Barracuda ST1000DM003 1TB 7200 RPM
RAM: G.SKILL Ripjaws Series 8GB (2 x 4GB)
CPU: AMD FX-8150 Zambezi 3.6GHz Socket AM3+ 125W Eight-Core Desktop Processor FD8150FRGUBOX with stock heatsink
PSU: CORSAIR HX Series HX750 (CMPSU-750HX) 750W ATX12V 2.3 / EPS12V 2.91 SLI Ready CrossFire Ready 80 PLUS GOLD Certified Modular Active PFC Power Supply
GFX: SAPPHIRE Radeon HD 6870 1GB 256-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card (100314-3L )
MOBO: MSI 990FXA-GD80V2 AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX AMD Motherboard
Case: Corsair special editon white 600T
*Also, I just built this yesterday and when I installed windows it restarted after installation and it still wouldn't boot up, so I've had this problem since the beginning.*

When sinking my iphone, it said it couldn't sink some purchased items because my library had changed, every time i open up itunes a new empty copy comes up which requires me to find the media and import it. Bottom line, restore to the correct signature

Itunes issue, reverts to blank copy after issue sinking purchased items, "auditable" said i was not the itunes certified library for the story book to sink.
Help:(

Itunes issue, reverts to blank copy after issue sinking purchased items, "auditable" said i was not the itunes certified library for the story book to sink.
Help:(

VerifyError: Error #1014: Class flash.media::MicrophoneEnhancedOptions could not be found.

Hi
In the adobe help there is much talk about AEC and sample codes for AEC.
I have downloaded flex sdk 4.5 ,AIR SDK 2.6 which are most recent builds.Installed Flash player 10.3 and AIR runtime 2.7 release candidate.
While using the following code for echo supression:
var mic:Microphone = Microphone.getEnhancedMicrophone();
mic = Microphone.getEnhancedMicrophone(0);
var options:MicrophoneEnhancedOptions = new MicrophoneEnhancedOptions();
options.mode = MicrophoneEnhancedMode.FULL_DUPLEX;
options.autoGain = false;
options.echoPath = 128;
options.nonLinearProcessing = true;
mic.enhancedOptions = options;
the following error occurs both in Web version as well as AIR version.
I have included the playerglobal.swc in both the version of applications in the folder frameworks\libs\player\10.3
In both case it is giving the following error:
[SWF] AudioChatClient_1.swf - 2,683,701 bytes after decompression
typecheck AudioChatClient_1/startPubishing()
   outer-scope = [global Object$ flash.events::EventDispatcher$ flash.display::DisplayObject$ flash.display::InteractiveObject$ flash.display::DisplayObjectContainer$ flash.display::Sprite$ mx.core::FlexSprite$ mx.core::UIComponent$ spark.components.supportClasses::SkinnableComponent$ spark.components.supportClasses::SkinnableContainerBase$ spark.components::SkinnableContainer$ spark.components::Application$ spark.components::WindowedApplication$ AudioChatClient_1$]
                       [AudioChatClient_1~[O] *[A] *[A]] {} ()
0:debugfile "D:\ECLIPSE_WORKSPACE\FLASH_BUILDER\AudioChat\src;;AudioChatClient_1. mxml"
                       [AudioChatClient_1~[O] *[A] *[A]] {} ()
2:debugline 54
                       [AudioChatClient_1~[O] *[A] *[A]] {} ()
4:getlocal0
                       [AudioChatClient_1~[O] *[A] *[A]] {} (AudioChatClient_1~[O])
5:pushscope
                       [AudioChatClient_1~[O] *[A] *[A]] {AudioChatClient_1~[O]} ()
6:pushnull
                       [AudioChatClient_1~[O] *[A] *[A]] {AudioChatClient_1~[O]} (null[O])
7:coerce flash.media::Microphone
                       [AudioChatClient_1~[O] *[A] *[A]] {AudioChatClient_1~[O]} (flash.media::Microphone[O])
9:setlocal1
                       [AudioChatClient_1~[O] flash.media::Microphone[O] *[A]] {AudioChatClient_1~[O]} ()
10:pushnull
                       [AudioChatClient_1~[O] flash.media::Microphone[O] *[A]] {AudioChatClient_1~[O]} (null[O])
11:coerce flash.media::MicrophoneEnhancedOptions
VerifyError: Error #1014: Class flash.media::MicrophoneEnhancedOptions could not be found.
    at AudioChatClient_1/__pub_btn_click()[D:\ECLIPSE_WORKSPACE\FLASH_BUILDE R\AudioChat\src\AudioChatClient_1.mxml:144]
My system specifications are:
OS: Microsoft Windows XP SP3
Intel Core 2 duo Processor with 2 GB RAM
Flash Builder 4.0
If possible could you provide the information of AIR SDK 2.7
Thanks
Sudhansu Sekhar Rana

Hi
me to...
While using the following code for echo supression:
var options:MicrophoneEnhancedOptions = new MicrophoneEnhancedOptions();
VerifyError: Error #1014: 无法找到类 flash.media::MicrophoneEnhancedOptions。
OS: Microsoft Windows XP SP3
Intel Core 2 duo Processor with 2 GB RAM
Flash Builder 4.5
Adobe Flash Player 10.3
Adobe Flash Media Server 3.5.2
10.3 playerglobal.swc
If who have already solved the method, please point out bottom.
     Thanks
QQ:52275313
Email:[email protected]

HT201263 [NAND] Find Flash Media And Keepout Error

Similar Messages

Maybe you are looking for