HT201263 need help restoring my ipod

step 4 does not show on m ipod it still showes disable...... Wht else can I do ?????

Post to the appropriate forum.
Follow the instructions in the article.

Similar Messages

  • I need help restoreing my ipod nano 3rd gen so its like new

    I need help restoreing my ipod nano 3rd gen so its like new

    Plug it to your computer using iPod USB Cable (any cable should work excluding iPhone 5 and Shuffle cables)...... when you see your iPod in iTunes go to that iPod and click restore...... the whole process should take (depending on what you have on your iPod and its is up to date) it should take no longer than 30 minutes...... then it will ask if you want to set up as new iPod or restore from back-up (itunes back up), since you said:
    so its like new
    click set as new iPod and follow through what they said.

  • I'm needing help restoring an iPod touch 5 back to factory settings because I purchased it used

    I'm needing help in restoring an iPod touch 5th generation back to factory settings. Because I purchased it used from a family member who can not remember their password or sercuity question answers

    They need to call AppleCare, ask to be transferred to the Account Security team.

  • Need help restoring MAC iPod

    I had accidently formatted a MAC iPod nano on a windows computer. Now my MAC computer will not recognize the nano. The mac will not allow me to restore the nano. Please help.
    When I plug the nano in to my MAC it goes through 15 second cycles of an alert about an ID and password that is no longer accepted by the iPod in order to restore it.
    Any help would be appreciated.
    Thanks
    MA004LL   Mac OS X (10.3)  

    I got around this very issue by using Disk Utility to format my 20GB 'click wheel' iPod choosing Mac OS Extended (journaled) for Volume Format. Reformat will will erase all data on the iPod, so don't do this if you have data on the iPod you need to retain.
    After my iPod was reformatted, iTunes 7.02 still would not perform a Restore, so I used an old verion of iPod Updater 2004-08-06 to successfully Restore to 3.01.
    Check /Application/Utilities/iPod Software Updaters for past release levels of iPod Software Updater that may still be on your hard drive.
    I then used iPod Updater 2006-06-28 to successfully Restore a second time to the current 3.1.1 as iTunes 7.02 still would not Restore to the current version.
    Hope this helps.
    PowerMac G5    

  • Please help. i need help restoring my ipod.

    i just tried to sync my touch to the computer since i haven't done it for a while and then all a sudden i have to restore my touch. i have done it about 3-4 times now and i even switched usb ports. but that hasn't helped... so now i get that picture where i have to connect it to itunes and i cant get it past restoring it. because i get the error (1604) and it wont let me do anything. PLEASE HELP ME!! i need info off of my touch for my senior classes. and i cant get onto the main screen so i can get into my Note Pad.

    Welcome to the discussions,
    see this article about error 1604 in the "Specific error codes and resolutions" section, check your USB drivers and security software settings. You might have to connect in recovery mode if this does not help. http://support.apple.com/kb/TS1275 and http://support.apple.com/kb/HT1808

  • HT201210 i need help restoring a locked ipod

    i need help restoring a locked ipod touch

    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • I need help with my Ipod touch 4th restoring to factory settings

    I have posted several posting because I need help but somehow everybody seems to ignore the subject or they just don't want to go there. I wonder why.
    Anyways, I'm in critical bind. I still have iTune 10.7 running on my iMac 10.6. However, when I try to synch my Ipod to my Mac I get a message that I need to restore my Ipod to factory settings.
    The thing that I'd like to know if I restore to factory settings if I could select which verions iTune I could select. I have 10.7 installed and also have a copy in TM.
    I don't want to use iTune V.11

    Ana
    I appreciate your input, but you still haven't told me how to restore the iPod w/o getting V. 11. So far for what I read it says that if I choose to restore back to factory settings that it will install the latest version of iTune. Is there any way that I can overide this? According to you, it sounds like I could but still you haven't share with me how to do it
    Illlaass
    Here is the thing I have iTune 10 installed but when I tried to synch the iPod is when I get the message that I have to restore it to the factory setting. I'm willing to go along with it provided that I can select iTune 10.7. I have it installed in my backups.

  • Ok i need to unlock my ipod but i don't know my password i use itunes but i need to update at the same time this srcews up the itunes and i have to restart the computer i need to restore the ipod please help

    ok i need to unlock my ipod but i don't know my password i use itunes but i need to update at the same time this srcews up the itunes and i have to restart the computer i need to restore the ipod please help

    Connect the iOS device to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Maybe here:
    Trouble installing iTunes or QuickTime for Windows
    iOS: Device not recognized in iTunes for Windows
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • I charged my iPod on my computer, and now iTunes gives me a message that I need to "restore" my iPod, but that if I "restore" it, I will lose all my settings.  I don't even use itunes on my iPod.  What can I do?

    I only use my ipod touch for downloading audio books with Overdrive and do not use itunes on it.  Today I charged my ipod on my mac, and my mac screen now tells me that  itunes has detected that my ipod is in "recovery mode" and   I need to "restore" my ipod, but the message warns that if I "restore" my ipod, I will lose all my settings and be back to factory settings.  All that shows up on my ipod screen  is the itunes logo and a charging cord.  I would be so grateful for some help.

    When in recovery mode you can't backup the iPod.
    You will have to restore via iTunes. See:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I need help restoring because it dose it but then it just freezing an its just still like tat plz help i sen u a pick apple wats u email 2 i can sen u a pick

    i need help restoring because it dose it but then it just freezing an its just

    If u haven't resolved this issue yet, I just did.
    What I did:
    1. Toggle the hold switch (turn it on and off)
    2. Reset to 'Disk Mode'
    by pressing the 'Play' and center buttons
    simultaneously
    (it may take a couple of trials to get it right)
    3. Update iPod with latest iTunes in Disk mode.
    4. Incase the 'Can't find firmware' error msg is displayed,
    follow the instructions in the link given below:
    http://docs.info.apple.com/article.html?artnum=304309
    Toshiba SatelliteA30-203, Compaq Presario 3000   Windows XP Pro  

  • I have a new PC w/ Win7 and Ipod is not recognized. I think I need to restore the Ipod but am unable to do so. thanks to any /all who can assist.

    I have a new PC w/ Win7 and Ipod is not recognized. I think I need to restore the Ipod but am unable to do so. thanks to any /all who can assist.

    Hello kevin
    Check out the article below to guide you to the proper article to get your iPod shuffle to show up. You will need to see if it shows up on your computer as a device in My Computer section in Windows Explorer. Then it will help you pick the right one.
    iPod not appearing in iTunes
    http://support.apple.com/kb/ts3716
    Regards,
    -Norm G.

  • HT1212 need help disabiling an ipod tuch 4th generashon please help

    need help disabiling an ipod tuch

    To disable an iPod just enter the incorrect screen-lock passcode 10 times or sp.
    If you want to recover from that
    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • My itunes store is saying that it could not contact the server, it says i need to restore my ipod but when i go to restore it, it says the server could not be contacted or something. what does this mean?

    okay so last night i went to charge my ipod in the computer and it started working then i took it out of the computer and put it on a wall charger and it had a spasm attack and shut itself down, after that it said i had to connect it to itunes so when i did it kept telling me that i need to restore my ipod, but when i press restore the itunes said "the contact server is not avalible" or something similar to that, what does that actually mean and is there anyway i can fix my ipod. i have dropped my ipod a few times, on tiles, wood, in a gutter of water when it fell out my pocket but im also wondering is it something to do with my ipod or is it itunes?

    Try:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    The abuse may prevent a restore or prevent proper operation of the iPod if you can restore the iPod.

  • TS1538 i need help because i need help getting my ipod touch to connect to windows vista and

    i need help getting my ipod touch to connect to windows because it keeps saying udb device not recognized and i tr\]ied restarting the settings!!!!!

    Have you tried here:
    iOS: Device not recognized in iTunes for Windows

  • TS3474 iTunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod.

    What do I do about this message? I've restored it 3 times, but this message still comes up, and i cannot put music on it now.
    iTunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod.

    Sounds like your iPod is broken. Take it to Apple or someone else who repairs iPods and see if you can get it fixed, or get it replaced.

Maybe you are looking for

  • Why can't I buy HD movies on iTunes for Windows?

    Hi, Was hoping someone could help me with an issue I'm having trying to purchase HD movies on iTunes using a Windows 7 system. When trying to purchase the movie in HD, I get the following message: The thing is, I was able to buy 3 HD movies previousl

  • Re-load request

    I have loaded the data into PSA, and the request is loaded into Data Target successfully. For some reason, is there a way for me to reload this request (from PSA) into the Data Target again? How should I go about this? Pleasea advice, thanks.

  • Adobe Reader 8 with older Celeron processor

    I have a 5 year old laptop with Celeron 1.1GHz & 128 KB cache. Adobe 8 requirements specify Pentium III all of which have 256 KB cache. Some Pentium IIIs are slower - 433 MHz than my Celeron. Should I try installing Adobe Reader 8 or stick with Adobe

  • 3 sap(integrate legacy with XI - Inbound and outbound proxy

    We are planning to  have 3 sap (SRM,BI  and CRM) systems  to integrate with legacy systems . All the systems have inbound  as well as outbound proxy calls. I have few questions: 1.What are the different steps to be configured to make this scenario wo

  • Importing webpage into fcp

    i am making a documentary and need to import some webpages into fcp... does anyone know how to do it? for example i am trying to show results from a tennis tournament but somehow can't seem to get it into my fcp.. thanks.