HT201263 phone update has caused iphone5 to just show a screen saying itunes? cannot change this screen. pc not detecting iphone.
phone update has caused iphone5 to just show a screen saying itunes? cannot change this screen. pc not detecting iphone.
Hi abbiesetty,
If your iPhone is showing the Connect to iTunes screen and you are unable to restore because your iPhone isn't being recognized by iTunes on your Windows machine, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Regards,
- Brenden
Similar Messages
-
I can't open itunes, i downloaded again and it just says itunes cannot open this page, please HELP!
can anyone help me getting itunes working?
I downloaded again too. Seems our fair company has been the butt of another joke. Hope apple can keep up. We've spent some money here...
-
Can anyone help? This was a birthday present for me and it's only about a year old.
Connect it in recovery mode using the instructions in the Apple support document below. This will allow you to bypass the passcode.
http://support.apple.com/kb/ht1808
B-rock -
Can anyone help? Im running 4.2.1 on a iphone 3gs... trying to update to 6.2.1. I did the update but now I cannot finish... it says it cannot at this time. I tried through itunes and through wifi but keep getting the same message... cannot at this time try again in a few minutes. I been trying for days. id be happy just to get back to 4.2.1 but don't know how. Can anyone help me please
That's almost always because the phone was hacked to unlock it at some point, or because you don't have a SIM card in the phone.
-
Auscompgeek: latest Firefox update has caused a conflict with Norton 360
Latest Firefox update has caused a conflict with Norton 360 "Web Safe" feature when using Yahoo search - no icons visible, i.e., green check mark for OK, gray for not enough info in Norton user data base, RED for unsafe
"Web Safe" feature functions in Firefox if Norton tool bar search is used (powered by ASK) - functions in IE8 when Yahoo search is used.
Problem is isolated to Firefox / Yahoo search.
No prior history of similar problem.
== Operating system ==
Windows 7Result from https://www.mywot.com - WOT link is :
SERVER NOT FOUND -
FROM WINDOWS (VISTA) A PROBLEM HAS CAUSED THE PROGRAM TO STOP WORKING CORRECTLY. WINDOWS WILL CLOSE THIS PROGRAM AND NOTIFY YOU IF THERE IS A SOLUTION. UPDATED TO THE LATEEST, I WOULD RATHER NOT HAVE AUTO UPDATES. [email protected] edit
You may select how and whether Firefox updates, although like most software it may be sensible to keep it up-to-date, it is more likely to remain secure and compatible with other software whilst up to date.
* for information on the options available see [[Updating firefox]] <--- clickable link --- -
I have photoshop CS4 with the newest update. I'm a photographer and just purchased the new canon 7d mk II. Today, I shot some photos on raw but am unable to pull them up in photoshop. A window pops up saying "photoshop cannot recognize this type of file. The thumbnails are white with a blue and white CR2 on them. Please help.
Adobe Camera Raw 5.7 is the latest for Photoshop CS4 Adobe - Photoshop : For Windows
The problem is that your new camera is supported by ACR 8.7 and only Photoshop CS6 and up supports this version.
So if you do not want to buy CS6 or subscribe to the $10/month Photography Program, you have to convert the CR2 files to DNG to work on them. Your original CR2s are untouched in the process, you just can't directly edit them in CS4, only the DNGs.
Maybe Canon offers editing software for their CR2s, but CS4 is not going to be updated and there is no way around that.
It's not what you want to hear, but that's the situation so far.
Maybe Elements or Lightroom has updated raw support for your camera, so I encourage you to visit those forums and ask.
Gene -
there was a problem while updating ios 7.1 now my ipad isnt starting up just shows a symbol of itunes with a arrow towards it with its USB cable
YOU ARE IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
Log in to my Verizon account. Try to access Backup Assistant contacts. The website is a loop......it behaves as if I'm not logged in. I have checked and DO have the services (provided for free with my plan). Phone is set up properly and just synched it to cloud. Cannot get to the verizon web page to Manage Contacts.
It may be a situation where we all wait for things to clear up. The Verizon Cloud has been having issues for a very long time. Have you tried backing up contacts to your Gmail account, if you have one?
-
My phone is telling me to restore it as it will not come on and just shows a plug into itunes sign...however there is an error restoring it. HELP?!
You might try:
Placing your device into recovery (DFU) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the battery charge warning,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
I cannot update iTunes because when I run the Apple Software Updater, it says "'iTunes + QuickTime' has an invalid signature. It will not be installed." If I try downloading only it says "'iTunes cannot update. Invalid signature. Can someone help?
This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards. -
I just updated to iTunes 11. This version will not allow me to change info on any songs. Have always use "command i" with previous versions. Anyone else experiencing this problem? A solution?
Hey! I had the same problem you did just today when I was trying to get my second iPhone to sync. What you need to do with music or anything extra that you doing you have to creat a second playlist or picture or anything that you would like to use, so that you can add to the second device that you are going to be using. I am not sure if that will help but it helped me out a lot!! Good luck!
-
We just got a new phone for my daughter. I am trying to restore from itunes account but the language is not English. How do I restore to English from the Hello screen?
WHen in the setup part the first question after hello should be language
-
HT4623 My phone just shows the Apple icon..Cannot power off or anything else.
I cannot use my phone. just shows the Aplle icon..cannot power off or restart
Go to this article read direction follow directions for Recovery Mode.
good luck
http://support.apple.com/kb/TS1441?viewlocale=en_US -
I cant update or remove itunes without receiving the message: the install source (itunes.msi) for this product is not available. verify that the source exist and that you can access it. Has anyone had this problem? Thanks
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?
Maybe you are looking for
-
How to determine the mimetype of an uploaded file (GUI_UPLOAD)?
Hi everybody. I use method cl_gui_frontend_services=>gui_upload to upload files and save the binary data in the database. to preview the filetype (pdf, doc, jpg, ...) later i also need to store the mimetype. but how can I determine the mimetype of an
-
Excise invoice date should be equal to GR Posting date in MIGO (Part1 cap.)
Hi, My client wants to have a date validation of "Excise invoice date should always be equal to GR Posting date" in MIGO (Part1 capturing)" whenever they do Goods receipt for excisable transactions. As per SAP standard the system will display an erro
-
ITunes version DLed won't work with my mac version
I had to go to the Apple store yesterday b/c somehow I lost iChat. So, they had to install everything all over agin, including iTunes. But, the iTunes they installed is the new 8.1 version and now I can't use it because it is telling me: You cannot u
-
Neither bootloader works? maybe this will work for you:
Hey all. I'd used arch before and loved it so when I got an old HP and went thru the install and everything seemed o.k. I was excited, until grub didn't work. At first I got the famous and well-documented Error 15, then I got another problem which
-
Flash stops playing sounds, then constant crashing.
So this only started happening recently and the only thing I can think of that I have recently done is update my Adobe Flash (directly from their website) and Firefox auto updates itself. I'll be watching a Twitch steam, browsing YouTube or Tumblr an