HT201263 Problems with ipad after installing security update iOS 7.0.6

Cannot get my iPad 2 out of recovery mode after installing the security update iOS 7.0.6
have tried plugging in to iTunes- on computer but doesn't get iPad out of recovery mode! Help?!?

Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting, but it can cure some glitches.
If this does not work, try to connect in recovery mode, explained here:
iOS: Unable to update or restore

Similar Messages

Problem with Entourage after installing Security Update 2008-005

Since installing the update I can no longer access the mail on my server using its required SSL settings in Entourage 2008. I can use Mail without problem, and I can access mail from my other servers (which don't require secure settings).
Any advice?
Thanks,
Madeline

Hello, i have the same problem. After security update the Mailprogram is polling my imap accounts (which requires SSL) endless. My workarround was to install Thunderbird. TB did the job. Any solution?
thh001

Since installing new update iOS 7 can't mirror my Apple TV with iPad, Since installing new update iOS 7 can't mirror my Apple TV with iPad

Since new ios7 update I can't mirror my iPad to Apple TV

Hello Boo ear,
AirPlay functionality has been moved to the Control Center.
iOS: How to use AirPlay Mirroring
http://support.apple.com/kb/HT5209
Cheers,
Allen

Printing problems after installing Security Update 2015-002

After installing Security Update 2015-002 on three separate computers on two different WiFi networks, printers on the network are losing their connections to the computers that can print to them. We have experienced this on a network running a Canon printer and an HP printer - both have disappeared on the network although the printer suggests it is still connected to the network. The same thing has happened on a separate network I manage with a single HP printer on that network. I have tried removing the printers, resetting the printers etc. Nothing is working. I can get one print out of a printer when I turn the printer off and then on. Three minutes later the printer is no longer connected to the computer - although still connected to the network. Please Help.

I think I have figured out that it is in fact the Apple Extreme Base Station that is losing the printer. It is very odd because the printer is connected to the Wifi. My computer is connected to the WiFi and connecting to the internet. The Router for the internet can see the printer. An Apple Extreme is then connected via a network cable in Bridge mode to the router. When I turned the power off the The Apple Extreme and then restored power it all worked. was still working this morning, but again this afternoon I needed to reboot Apple Extreme. It is quite strange that this is happening on two different Networks in different parts of the country at the same time. Maybe the Security Update is somehow affecting/blocking communication with the printer? I just don't know enough. These networks have been up and running with the same printers and computers for years with zero problems - all of a sudden we have the same problem on both Networks.
Any help will be very much appreciated.

Problem after install Security Update 2011-003

hi
after after install Security Update 2011-003
i can't open App like mail, safari and more.
any idea
Benny

Process:         Safari [400]
Path:            /Applications/Safari.app/Contents/MacOS/Safari
Identifier:      com.apple.Safari
Version:         ??? (???)
Build Info:      WebBrowser-75332101~1
Code Type:       X86 (Native)
Parent Process: launchd [212]
Date/Time:       2011-06-01 02:54:16.134 +0300
OS Version:      Mac OS X 10.6.7 (10J869)
Report Version: 6
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
Reason: no suitable image found. Did find:
          /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore. framework/Versions/A/WebCore: truncated fat file. file length=12320768, but needed slice goes to 35270944
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <39AC3185-E633-68AA-7CD6-1230E7F1CEF4> /usr/lib/dyld
q

I am unable to open Calendar on my iMac - this occurred after installing Security Update 2015-002. I don't know if related. A message pops up after several minutes saying Calendar quit unexpectedly (but it never really opens). How do get Calendar b

I am unable to open Calendar on my iMac - this occurred after installing Security Update 2015-002. I don't know if related. A message pops up after several minutes saying Calendar quit unexpectedly (but it never really opens). How do get Calendar back?

Hi Magsrobby,
Welcome to the forum and thanks for posting. I'm really sorry to hear you've had so many problems. I can look into this for you if you wish. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

All application slow to molasse after Installing Security-Update 2010_007

After installing security update, ALL applications, all commands in X11 had response times ALL key strokes of the order of seconds to minutes with >93% of system CPU idle. Console displays the message below ever 60-70 seconds.
11/11/10 4:25:36 PM updatedyld_sharedcache[12] for arch=i386 failed: read failure copying dylib errno=5 for /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib while copying /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib to shared cache
The solution is a modification of this link
http://www.macosxhints.ch/forums/showthread.php?t=15517
Basically, the offending file /System/.../LibLAPACK.dylib is moved from the system directory to a current directory, e.g.,
sudo mv /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib .
and then back to the original directory, e.g.,
sudo mv libLAPACK.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
Problem solved without reboot as system immediately returns to normal. Why would a security update from Apple cause this?

Andreas, do you have this info in english? I'm having a similar problem, and I want to see if I can solve it; or could you tell me what you did to solve it?
Here's the message I'm getting every minute from the console:
updatedyld_sharedcache[1461] for arch=i386 failed: read failure copying dylib errno=5 for /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics while copying /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics to shared cache

Trouble after installing Security Update 2005-009

After installing Security Update 2005-009 I experienced some minor problems with Dashboard where some widgets no longer work and a more annoying problem with CodeTek VirtualDesktop Pro, which exits directly after launching the app (the desktop pager and menu appear and then the app quits). Tried repair of permissions, deleting of VirtualDesktop Pro's prefs, reinstalling the app, etc. - so far nothing helped. CodeTek does not answer my support requests. Has anyone experienced similar problems?
Power Mac G5 1.6 Mac OS X (10.4.3)

I would completely uninstall all 3rd party widgets. Restart. Then see if the problem goes away.
It's likely to be an issue with one of your widgets. And possibly a combination of specific one with a specific another.
- Shilo

OSX cannot boot-up after installing Security Update 2008-008

Hi Everyone.
I'm using a MacPro 2 x 2.66Ghz Dual Core Intel Xeon with 3GB RAM with Tiger 10.4.11.
After installing Security Update 2008-008, my OSX was not able to boot-up. The screen shows the Apple Logo and the spinning grey gear wheel. It stayed that way for several hours.
I finally switched it off and re-installed OSX 10.4.8 using the Start-up disk that came with my MacPro.
Now I've updated the OSX, all the software & updates EXCEPT Security Update 2008-08. My MacPro works fine now.
Was Security Update 2008-008 the cause of this problem ?
Sincerely,
Azman

Was Security Update 2008-008 the cause of this problem ?
Probably not directly. Very likely something was not quite right on your computer before the update and the update happened to exacerbate that. A number of people feel that optimizing the maintenance of your computer before doing the update and doing the update under controlled conditions minimizes problems.
There's been recent discussions as to what steps are truly necessary in doing a minimal problem update.
I think #1 to which all agree is to make sure you have a backup of your computer in case you do need to back out of it again.
Some like to boot from their installer discs or an external backup and verify (and if necessary repair) their internal drives as well as drive permissions. This is done with Disk Utility.
You can also go to the step of booting into safe mode to do the install.
I like to download the update onto my computer and install it from there rather than let Software Update do it. I know a few people who had problems with doing the update via software updater found a manual install to work.
Repair permissions again afterward.
It also helps to only install one update at a time and to run the computer for a while to make sure it is behaving well.
Almost all of the above steps (except backup) have been questioned as to necessity because probably many people have done successful updates without doing them. I say they can't hurt, they can very likely do good (especially if your computer isn't regularly maintained), so why not do them to be safe.

HT201366 CAC readers not working after installing security update 2013-003?

Is anyone else having problems with CAC readers not working after installing security update 2013-003? CAC required websites are causing safari and chrome to crash.

For CAC issues, see:
MilitaryCAC's Mac OS X support landing page
Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Black screen on startup after installing security updates KB293357 and KB2937610 on Win 7 64bit

After installing security updates KB293357 and KB2937610 (both related to .NET) on Win 7 Enterprise 64 bit, my computer fails to start up correctly:
- start up and windows boot screen
- then black screen and computer freezes
The only option to this problem I found so far is do a cold reboot and then let system repair uninstall the updates. Is there a better way to solve this problem?
System:
Asus UL80VT laptop
NVIDIA GeForce G210M (driver version 9.18.13.2702)
Win 7 Enterprise, fully updated

Hi,
After you unstall the two updates, does the black screen issue completely disappear? We should first figure out whether the two updates are the culprits.
Since the two updates are related with .net as you mentioned, then here's a .NET Framework Repair Tool released by Microsoft, I suggest you try it and check if it cna detect something.
http://www.microsoft.com/en-in/download/details.aspx?id=30135
Check your event viewer and see if it recorded something valuable.
Yolanda Zhu
TechNet Community Support

Applications crashing after installing security update 2010-003

Hi all, anyone else having this problem (and found a solution)? After installing security update 2010-003 on snow 10.6.3, entourage, firefox, and even itunes are crashing at launch. Safari seems stable, but haven't tried other apps yet. Verified permissions on my boot disk and repaired it but the problem persists. It started after rebooting after installing the security update. I'll reinstall the OS if needed but hoping this is a bug someone has solved. Thanks!

http://www.thexlab.com/faqs/multipleappsquit.html

Finder restart every two seconds! After install security update 2011-005

After install security update 2011-005, I rebot my computer and every seemed normal, until I saw that started to restart the finder.
Help me! please.
PD: I try to delete the famous "com.apple.finder.plist" but I can't found them.
Is a MacBook Pro 13'' mid 2009 OS X Lion (10.7.1)

You may be able to repair this with 10.4.8 PPC Combo Update
This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before. It has worked well for many.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
-mj
[email protected]

After installing security update 10.6.8 I've seen dialog boxes asking me if I will permit certain root processes, e.g. configd, to receive unsolicited messages from the internet. What are the consequences of denying these requests?

After installing security update 10.6.8 last night I've seen dialog boxes asking me if I will allow incoming network connections to certain root processes, e.g. configd. I didn't see these dialog boxes prior to installing 10.6.8. How do I make informed decisions? In other words,
(1) Where can I find 25-word summary descriptions of these processes?
(2) Where can I find discussions of the consequences of granting or denying these requests?
Alternatively (and at some risk of revealing metaphysical doubt) why am I being asked for these permissions? And who expects me to make correct decisions?
I have turned on th standard-issue OS X firewall and am running my system in stealth mode.

After installing security update 10.6.8 last night I've seen dialog boxes asking me if I will allow incoming network connections to certain root processes, e.g. configd. I didn't see these dialog boxes prior to installing 10.6.8. How do I make informed decisions? In other words,
(1) Where can I find 25-word summary descriptions of these processes?
(2) Where can I find discussions of the consequences of granting or denying these requests?
Alternatively (and at some risk of revealing metaphysical doubt) why am I being asked for these permissions? And who expects me to make correct decisions?
I have turned on th standard-issue OS X firewall and am running my system in stealth mode.

Finder(?) problem after installing security update 2008-008

I hope someone can help with this problem:
After I installed Security update 2008-008 the finder(?) has begun to behave irratically.
Whenever the mousepad is clicked, the dock slides off to the left and the click is not registered by whichever application I am in. Mostly menus are affected. I now have to click the application and menu item several times before the click is registered.
Safari is particularly badly affected with the pointer jumping around the screen when trying to copy an url (dock keeps sliding to the left), page back/forward doesn't work - url links within web pages are not recognised. Furthermore, when using yahoo mail, menus like 'send' and 'save' are not recognised.
Any suggestions how to resolve this problem would be greatly appreciated!
Andrew

HI Andrew,
This is most likely caused by some 3rd part APP or kext that is now out of date.
Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then test your problem there.
Now reboot in regular mode, if the problem didn't happen in Safe Mode, but does in Regular mode, See if there is anything relevant in...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
Also look in in Your Accounts Pref Pane Login Items window.

HT201263 Problems with ipad after installing security update iOS 7.0.6

Similar Messages

Maybe you are looking for