HT201263 Putting iPad out of recovery mode

I tried to update my iPad to IOS 8 and it just went into recovery mode. How do i take it out of recovery mode without losing my media e.g. pictures

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

Similar Messages

  • How to get ipad out of recovery mode?

    how do I get my ipad OUT of recovery mode.  i don't want anything deleted.

    If you are already in recovery mode, then your data is already lost. Your only option is to restore through iTunes then reload your most recent backup which you say was some time ago. This is why you need to backup everything at least once a week. Then when problems arise, you haven't lost a lot of information.

  • How could I get my iPad out of recovery mode without deleting all its data?

    I updated my iPad 2 to iOS 7.1.2 or so while it was plugged into my laptop, which caused it to go into recovery mode. And it didn't back up anything at all. I tried TinyUmbrella and other tools, but it only seemed to restart the iPad and put it back into recovery mode, and I even tried hard-rebooting and it still is in recovery mode. Please help?

    If it's in recovery mode then it's too late to take another backup or copy anything off it, you will need to reset back to factory defaults and then restore to your last backup. If you were updating via your computer's iTunes then it should have taken a backup as part of the update - what's the date of its latest backup in the Devices tab in Preferences on your computer's iTunes ?

  • How can I get my ipad out of recovery mode without losing all of my data

    I plugged my ipad into my laptop to charge, it went into recovery mode, I cannot lose my data.  How can I save my data and get out of recovery mode?

    Unplug it from your laptop and try a reset:
    Reset: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)
    If it goes back into Recovery Mode then unfortunately your data is already lost.
    Restore from your iCloud or iTunes backup.
    iOS: Back up and restore your iOS device with iCloud or iTunes

  • Cant get ipad out of recovery mode

    I tried to update my ipad and it put it into recovery mode and i cant get it out. I tried to hook it up to itunes and it wont  let me restore it either. Help!!

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • How to get the ipad out of recovery mode

    I tried to update my ipad and instead of updating it it is now stuck in recovery mode please help me to get out of this

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • What to do next if you follow all steps and still can't the iPad out of recovery mode?

    I followed all steps by ensuring I downloaded the latest version of iTunes but to no avail, my iPad 2 is still in recovery mode. I refused to give greedy arse  Apple anymore money which I know is their ultimate goal...What to do??? I know there was a tech person on here, Techmadness I think was his/her screen name and he/she mentioned something about "firmware"...Please help somebody, anybody, someone, anyone

    I think that you want to try DFU mode whcih is Device Firmware Upgrade.
    http://www.imore.com/tip-put-iphone-ipad-dfu-mode

  • TS1398 How do I get my ipad out of recovery mode? I am not sure if I h

    I initiated the ITunes update on my iPad, and it went into recovery mode.  I cannot get it to restore.  It says that it cannot connect to the iPad server.  I have syncd my iphone with my pc, but my iPad is not responding.  I have tried pressing sleep and hold button at same time.  The apple appears but goes right back to the usb pic, an arrow, and the itunes symbol appear.Can anyone help me with this problem?

    Have you tried this:
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times.

  • How to get iPad out of recovery mode without restore?

    My iPad randomly went into recover mode when I was updating to the latest ios software, 7.1.2. I had already downloaded the update, and this happened while it was installingthe update. I had not backed up for a long time now, and I am getting really scared that I will lose everything. Can anyone PLEASE help me by guiding me to get my iPad up and running again without losing my data. After all, I have done nothing wrong here.

    If you are already in recovery mode, then your data is already lost. Your only option is to restore through iTunes then reload your most recent backup which you say was some time ago. This is why you need to backup everything at least once a week. Then when problems arise, you haven't lost a lot of information.

  • HT4061 how do I get my iPad out of recovery mode, Apple are asking for my serial number can not do as it is locked can not enter at all

    my ipad is locked with the itunes icon & cable on the screen I believe this is recovery mode?? how do I get it to work again

    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • How do i get my ipad out of recovery mode?

    i cannot restore my ipad mini on itunes because when i try to do it, a message pops up and says, the iPad "iPad" cannot be restored at this time because the iPad software update server could not be contacted or temporarily unavailable. i am kindly asking for some help to fix it please.

    iPhone- Updating or restoring during times of overwhelming demand

  • How do I get my Ipad 2 out of recovery mode, without restoring. Please.. I can't lose my storage..

    I've had my ipad for awhile now, and I've never come across this problem before.I was just updating my ipad and it radomly goes into recovey mode. I don't get why I have to restore it to fix it. I've tried multpile things on the internet to get it off. If you recommend any sites that could help me that would be great. I just can't lose the things I have on my Ipad. I'm not sure if its backed up so please... help.

    For Windows user,Please click the “Restart” button after you run an iPhone recovery tool to get your iPad out of recovery mode.
    If you are Mac users, click the “Set Up” button to get your iPad out of recovery mode.
    More information:
    How to get iPad out of Recovery mode

  • HT201263 how do i put the ipod in recovery mode

    How do i put the ipod in recovery mode so that i can unlock it... Thank you

    If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore, then restore as New.
    If you are restoring to fix a forgotten Restrictions Code, then skip Step 9 and restore as New.
    If you really do need to put it in recovery mode (DFU):
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the screen pictured below,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • TS1369 my "home" computer for my ipad is no longer working, how can i get my ipad recognized on new comp to get it out of recovery mode?

    The original laptop i used to start my ipad broke so i have a new laptop. I cannot upgrade my ipad with the new laptop and i cannot get it out of recovery mode cuz my laptop is not recognizing the ipad. How can i get my laptop to recognize the ipad so i can get it out of recovery mode?

    Hey Dpcupcake,
    If you can not get past the sign in screen on your iPad, you will need to use the steps in this article to recover use of your iPad -
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
    Thanks for using Apple Support Communities.
    Happy computing,
    Brett L 

  • Hello, my ipad has been disabled, and it says that I need to connect to itunes. To solve this issue as instructed I connected to the find my iPad/iPhone site to put it on the recovery mode. However, I accidentally erased my account, so please help!!!

    Hello, my iPad has been disabled, and it says that I need to connect to iTunes. As instructed I connected to the find my iPad/iPhone site to put it on the recovery mode. However, I accidentally erased my account, so please help!!! Also, I browsed a lot to find a solution, but none of them were helpful, sorry. Hopping you could help, thank you.

    However, I accidentally erased my account,
    How did you erase your account?  A lot of people would like to know.  No one has found a way of erasing an Apple id account.
    Robert

Maybe you are looking for

  • Where is the cache? Can it be configured to another location?

    I have a second hard drive in my system for data. This prevents "fragmenting" occurring on my program drive. With IE I was able to configure the cache to my data drive. Can this be done with Firefox?

  • Program Buffer swap

    Hi Techies In our Production servers i found that Program buffer swap are more around 10 thousand swaps I have restarted the server twice but still after two days again the swap are increased ( only the program buffer swaps are more) and moreover hit

  • No matter what I do iTunes will not save my card details.

    Dear all, No matter what I do iTunes will not save my card details. Everytime I go to buy something it says "Your account information has changed" and takes me to the card details page. I update the card details correctly and click done and it takes

  • Final cut is not reading events or projects from my external hard drive anymore

    Hi I recently backed up using time machine and when I opened FCP X those events and projects stored on my external drive no longer showed in FCPX. There is space on the internal but want to save space by saving on external. Any ideas how to relink th

  • Can't start SAPCCMSR

    Hi, i have a problem with the sapccmsr agent. On one system the sapccmsr agent isn't running. If i try to start the agent: "sapccmsr -DCCMS -j2ee pf=/..." it tells me that the agent is already running under process ID xyz. But there is no process wit