HT201263 The restore stops encountering an error and then i see the connect to itunes image and nothing happens.

The restore stops encountering an error and then i see the connect to itunes image and nothing happens.PLEAS HELP

Are you trying to restore as new or from a back up? Is iTunes  and your computer all up to date?

Similar Messages

  • Safari has frozen with a dialogue box open that simply makes a statement and then invites a single click on 'ok'. Unfortunately nothing happens except and audible error beep

    Safari has frozen with a dialogue box open that simply makes a statement and then invites a single click on 'ok'. Unfortunately nothing happens except and audible error beep

    MartinandJoanne wrote:
    Safari has frozen with a dialogue box open that simply makes a statement and then invites a single click on 'ok'. Unfortunately nothing happens except and audible error beep
    Are we to guess at the statement?

  • HT204406 I have purchased match but when i try to play a song from the cloud on my ipad it displays a message of " cannot connect to iTunes Store" and doesn't play the song. i have reset both devices.

    I have purchased match but when i try to play a song from the cloud on my ipad it displays a message of " cannot connect to iTunes Store" and doesn't play the song. i have rest both devices.

    I called Apple Support and they walked me through it. They told me to basically copy and paste my music to the external hard drive. (I think.) Or maybe it was they had me transfer a folder to the EHD. I don't exactally remember it was a few years back. But I tried to plug in the EHD before starting and...nothing. Still says same thing, "locate file."

  • TS1538 my ipad can not continue to download ios 6.1.2 because of connection problem and it is stuck in connect to itunes image, i cant open it anymore..what should i do? help plz

    my ipad can not continue to download ios 6.1.2 because of connection problem and it is stuck in connect to itunes image, i cant open it anymore..what should i do? help plz

    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/ht4097
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • Hi i got a few free app before and did not download them completely and dont want to do this but they stay in my download list and start automatly when i connect to itunes store and going to crazy me how can i remove them from my account for ever please h

    hi
    i got a few free app before and did not download them completely and dont want to do this
    but they stay in my download list and start automatly when i connect to itunes store and going to crazy me
    how can i remove them from my account for ever
    please help me
    thank you

    Try Here  >  https://discussions.apple.com/thread/4074945?tstart=0

  • My ipod isnt letting me add contacts at all i open it up and then i see the   sign but a second later it goes away

    Iam wondering how i can some how fix it so i can add contacts again...do i need to restore it??
    Anyone have anyclue how to fix this!?!?

    You'll have to restore your iPod as new.  If you restore your iPod and then restore it from the backup you'll just be putting the problem right back on it.
    http://support.apple.com/kb/HT4137

  • All my data shifts to "Other" category and then won't re-connect to iTunes.

    Hi,
    This will be hard to explain. I've been using my laptop to connect through iTunes on Vista for the last seven months, and no problems have occurred at all. I have 80gb+ data combined with music and video on my iPod, but all of a sudden when I went to sync my iPod with iTunes, the USB connects and the iPod reads as "Connected," but iTunes won't recognize.
    Then when I disconnect the cable, iTunes appears with the following message: "iTunes cannot read the contents of the iPod. Go to the Summary tab in iPod preferences and click Restore to restore this iPod to factory settings.
    And I would LOVE to do that, but I've already needed to disconnect the USB to the iPod because iTunes wouldn't recognize it until after it was already disconnected.
    I'm at a loss for words here because I've been an iPod user for three years now, and I've never had this happen to me before. I would gladly Restore my iPod if only I knew how to have iTunes recognize the iPod.
    Can anybody assist me with this? I really need it, thank you.

    I still don't know what the cause was for all my data suddenly shifting to "Other," therefore making it unwatchable and me unable to listen to the music, but I decided to go into the iPod manually from "My Computer," and click on the iPod drive that opens a number of other menus (such as Notes, Calenders, etc.; just the basic selections within the iPod itself).
    When I clicked the drive and was looking at the options, I highlighted them all -- with iTunes still running -- and deleted them. Eventually, the iPod was finally recognized by iTunes, and so I cancelled the delete, and was able to click "Restore" when the iPod was at last recognized.
    It's syncing all my music and videos back up now, so I'm happy. It might not have been the safest thing to do to the iPod, risking permanent deletion of certain necessary files that could render it useless in the end, but I was desperate and thankfully when the iPod was restored all the files I had previously deleted were created again, making the whole decision quite successful (thus far.)
    Thanks.
    Message was edited by: undefinability
    null

  • Restarted my macbook and then there was my macbook hard drive image and an alias

    Do I drag  the alias of my macbook hardrive to the trash? Did not duplicate this on purpose it just appeared after a restart

    familyfromapo wrote:
    The movies are Dexter that we purchased at a store.  He uses the Air and since it does not have the disk option this is how we were hoping he could view his shows.  We had no idea we would be breaking the law....just wanted to put all of the movies we have purchased  on the external solely for the intent of our viewing. 
    Thank you for your time and help.
    Sorry.
    It is illegal to break the encryption to copy a dvd.
    Judge: DVD-copying software is illegal - CNET News
    Judge Rules DVD-Copying Software Is Illegal | Threat Level | Wired ...
    MPAA Says Making Even "One Copy" of a DVD is Illegal

  • Server Admin keeps dispaying error "The service has encountered an error."

    All the services in the Server Admin function are continuously displaying the following error message:
    The service has encountered an error.
    Try to refresh the view (servername.local/servicename). (kNetworkError)
    I press OK and the message disappears, but I have to go through every service to remove this message, and then it just reappears a little later. But it doesn't seem to affect the operation of the server, but I'm concerned that this is disguising a future problem and would like to get rid of this occurring. I have searched the forums and found nobody to help me. Please can anyone help me?
    Message was edited by: Viking Marauder

    Thanks guys, it seems this is a feature of the operating system and Apple have not bothered to find a solution, maybe because you're not supposed to leave the server admin open for long periods of time. A little disappointing, however it does not seems to be causing any other problems with the server as it is running perfectly well.
    Thanks to everyone for your input, I'll close this issue now, and as Jamie Curmi stated this may be resolved in the next release of the OS.

  • The Service has encountered an error: ...(kNetworkError)

    Was running 10.5.5 iCal server just fine. Then I decided to move the "Data Store:" in the settings tab to another location. Ever since then, when I click on the iCal service, the grinding wheel rolls on and gives this error...
    The service has encountered an error.
    Try to refresh the view (10.1.1.6/iCal). Report the
    problem to the administrator if it persists.
    (kNetworkError)
    Please help. Sometimes, it does let me change the Data Store: area but then goes on to the error above. I tried refreshing, quiting, restarting the service, moving the folders around (library/calendarserver).

    I am getting a similar error, but when trying to access the DHCP service. The message is "The service has encountered an error. Try to refresh the view (<host>/DHCP). Report the problem to the administrator if the problem persists. (The service did not recognize the command)".

  • How to solve the error " The installation process encountered an error while installing Shared Technologies.

    I had bought the adobe photoshop elements 12 online and I am not able to complete my installation although i tried many times . An error "The installation process encountered an error  while installing Shared Technologies. Please restart your computer and try again" occur

    Photoshop Elements 12 fails while installing sh... | Adobe Community

  • 8Gb Touch 2nd gen problem. Only showing connect to iTunes screen and not letting me past that as I have a password - Already reset and it just loops back to the same screen with the same problem

    I have an iPod Touch 8GB 2nd gen and it's only showing connect to iTunes screen and not letting me past that as I have a password - Already reset and it just loops back to the same screen with the same problem.
    Any idea what I can do to fix this?

    you can connect the iPod to iTunes in recovery mode:
    Hold down the Home button and the Power button simutaneously, until the screen goes black and the device turns off.
    Now let go of the Power button, but continue to hold the Home button. Your iPod Touch/iPhone should have turned off and the screen should not be on.
    After around ~10-20 seconds, you will hear a noise (beep/ding) from your CPU as if it had just recognized a new hardware device
    and restore it to default settings, in order to remove your password (or just remove your password directly from the iPod touch, in order to sync with iTunes)

  • I just got new iphone 4 but it tells me to restore the phone wen i plug in my computer.. then half way thru the restoring on the "firmwear" part it stops an says error "9?? wats the go there?? its driving me insane...

    i just got new iphone 4 but it tells me to restore the phone wen i plug in my computer.. then half way thru the restoring on the "firmwear" part it stops an says error "9?? wats the go there?? its driving me insane...

    Let's first define what "new" means. Was it purchased from Apple or your authorized carrier, and it came in a shrink wrapped box? Or is it only new to you, and you don't know its history?
    Assuming it truly is a new, never used phone, Error 9 means that the USB connection to the phone is intermittent. Do the following:
    Make sure you have the latest version of iTunes (10.4) - if not, download and install it from htp://www.apple.com/itunes
    Reboot your computer
    Disable your antivirus and firewall software
    Disconnect all USB devices except keyboard and mouse
    Connect the cable to a USB port directly on your computer, not to a hub; do not connect the other end to the phone yet (If your computer is a desktop or tower and has ports on both front and back us a port on the back)
    Launch iTunes
    Connect the phone to the other end of the cable
    If the phone is recognized in iTunes proceed with the Restore
    If the phone is NOT recognized by iTunes:
    Disconnect the cable from the phone (leave connected to the computer)
    Hold the HOME and SLEEP buttons until the screen goes blank, then IMMEDIATELY release the SLEEP button but continue holding the HOME button
    Connect the cable to the phone while holding the HOME button
    Wait for iTunes to recognize the phone, then release the HOME button (this may take several minutes of holding)
    If you still have a problem after these steps take the phone to Apple for exchange.

  • Have a  problem with Lightroom 5.4.  Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit".  "  Lightroom will attempt to fix this problem net ti

    Have a  problem with Lightroom 5.4.  Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit".  "  Lightroom will attempt to fix this problem next time it launches".  Except that it doesn't, I keep getting the same message and the program closes.  Does anyone know what I  can do to repair it?  Can't back up, can't do anything.

    There are dozens of threads in this forum that describe the fix

  • I recieved a notice that there was an update for Elements 13 but when I try to install it it stop's half way through then I get the error message that "updates could not be applied" I have tried several times and it continues to give me the error. What is

    I get a message that an update is available and when I install it the update stops half way through and I get the error code: U44M1I210 for Camera Raw and Elements 13.1 updates. I get the message "UPDATES COULD NOT BE APPLIED" Can someone help with this? Thank you. David

    drmeyers381
    Thanks for the follow up.
    Is your Premiere Elements 13 on Mac computer?
    I have not seen much in the way of alternatives coming from Adobe on the Premiere Elements 13.1 failed updates.
    But there seems to be several discussions on U44M11210 in the CC products...one
    Update failure. (U44M1I210) | Adobe Community
    You could try the uninstall, free ccleaner, reinstall with antivirus and firewall(s)  and then try for the Help Menu/Update for 13.1..
    If Mac, https://www.piriform.com/mac/ccleaner
    If Windows, CCleaner - PC Optimization and Cleaning - Free Download
    The CC people seem to have the advantage of an online download of their update as well as the one via the Help Menu/Update.
    Premiere Elements does not have that perk - update only via Help Menu/Update.
    Please review and consider and please let us know of your progress as your schedule permits.
    Thank you.
    ATR

Maybe you are looking for